基本释义:

激光烧孔

网络释义

1)Laser hole buring,激光烧孔

2)hole burning,光谱烧孔

3)spectral-hole burning,光谱烧孔

4)spectral hole-burning,光谱烧孔

5)spectral hole burning,光谱烧孔

6)laser ablation,激光烧蚀

用法和例句

n this paper,the authors report the temperature dependence of homogeneous line width in photon-gated spectral hole burning materials:metal-tetrabenzoporphyrin derivatives/p-hyfroxybenzaldhyde/PMMA or CA,at a temperature range,from 30K to 70K.

本文通过在不同温度下对金属卟琳系列光子选通光谱烧孔材料的测试，研究了部分有机电子转移型烧孔材料的均匀线宽随温度变化的关系，在３０Ｋ到７０Ｋ温度范围内得到了Γｈｏｍ∝Ｔ１。

The dependence of hole depth on pulse number were observed and hole burning quantum efficiency with different laser power were obtained.

本文由光谱烧孔的发光动力学方程出发，推导了脉冲光烧孔并选通的情况下量子效率的表达式。

The phenomenon of spectral hole-burning in homogeneously broadened media and the experimental slowing of light in ruby are described.

主要阐述了均匀加宽介质中的光谱烧孔理论以及借助光谱烧孔技术在红宝石晶体中实现光速减慢的实验。

Mathematic relations between system characteristics, materials characteristicsand read/write condition are established for holographic grating spectral hole-burningtechnology.

建立了全息光栅光谱烧孔技术中，系统的存储密度、读出信噪比和材料特性、读写条件关系的数理模型，计算机模拟定量分析得到了最佳材料特性参量空间。

With the transient solutions of optical Bloch equation the dependences of hole width and depth on the burning pulse duration have been discussed in spectral hole burning of two level system.

由光学Bloch方程出发,从理论上计算了孔宽和孔深与脉冲持续时间的关系,并讨论了二能级系统光谱烧孔中孔宽和孔深与激光脉冲持续时间的关系。

And then the progress of three-dimensional optical storage, the principle of data storage, as well as problems of various ways of storage need to be solved about 2-photon 3D optical storage, spectral hole burning for data storage, holographic storage, and thre.

介绍了双光子吸收光存储、光谱烧孔光存储、激光全息存储和透明介质的飞秒脉冲体存储等三维光存储的进展、数据存储的原理以及各种存储方法有待解决的问题。

The present paper report the research results on inhomogeneous broadening, fluorescence line narrowing, high temperature persistent spectral hole burning, mechanism of hole burning, hole burning dynamics and thermal stability of spectral holes.

基于光谱烧孔在高密度光存储中的可能应用,研究了谱线非均匀加宽、荧光谱线窄化、高温永久性光谱烧孔、烧孔机理、烧孔动力学过程和光谱孔的热稳定性。

Progress in application of laser ablation inductively coupled plasma mass spectrometry in metallurgical analysis;

激光烧蚀进样电感耦合等离子体质谱法在冶金分析中的应用进展

Ag nanoparticles colloids produced by pulsed laser ablation in distilled water;

蒸馏水中采用脉冲激光烧蚀制备Ag纳米粒子胶体

Progress of quasi-one-dimension nanomaterials synthesized by laser ablation;

激光烧蚀法制备准一维纳米材料

Study on the Laser Ablation Threshold of Copper Using Laser Beam Deflection Technique

用光偏转技术研究铜的激光烧蚀阈值

Pulsed Laser Ablation and Target Optical Characteristic Investigation;

脉冲激光烧蚀及靶材光学性质的研究

Researches on Laser Ablation Induced Plasma Emission Spectra

激光烧蚀诱导等离子体光谱实验研究

Energy Density Threshold of Nanocrystalline Silicon Film Prepared by Pulsed Laser Ablation

激光烧蚀制备纳米Si晶粒的激光能量密度阈值

State and prospect of nanoparticle preparation for laser ablation

激光烧蚀法制备纳米粉的现状及前景

Studies on Theories and Experiments in Femtosecond Laser Ablation of Metal;

飞秒激光烧蚀金属的理论与试验研究

Dynamics Simulation of Nanosecond Pulsed Laser Ablation of Ge Crystal;

脉冲激光烧蚀晶体Ge的动力学模拟

Study on Transporting Process of Laser Ablation Solid Sampling in ICP-AES

ICP-AES中激光烧蚀固体进样的输运过程

Measurements of impulse coupling coefficient for laser ablating PVC film on transmission mode

透射式激光烧蚀PVC冲量耦合性能实验

Polymer seeded with metallic powders in ablation mode laser propulsion

激光烧蚀掺杂金属粉工质的推进性能

Numerical calculation of the electron-phonon coupling relaxation time in pulse laser ablation

脉冲激光烧蚀中电声弛豫时间的确定

Plasma Performance for Laser Ablation of Boron-Potassium Nitrate

激光烧蚀硼-硝酸钾的等离子体特性

Emission Spectrum Analysis of Laser Ablation on the Metal Surface

激光烧蚀金属表面产生的发射光谱分析

Laser Ablation Al and Cu Plasma Spectra;

激光烧蚀Al、Cu等离子体光谱的实验研究

Progress in the Method of Laser Ablation Solid Sample Introduction to Inductively Coupled Plasma Source

ICP光源的激光烧蚀固体样品引入方法进展

Effects of Ambient Gas Pressure on Excitation Radiation Mechanism in Pulsed Laser Ablation of Copper

环境气压对激光烧蚀Cu诱导发光机理的影响

THREE-DIMENSIONAL PARALLEL COMPUTATION OF LASER ABLATIVE RAYLEIGH-TAYLOR INSTABILITY

三维激光烧蚀瑞利-泰勒不稳定性并行计算

Ablation of Diamond Grain by Laser and Analysis of Its Affected Layer and Micro-crack

激光烧蚀金刚石磨粒及其变质层与微裂纹分析