基本释义:

罗盘针型频率计

网络释义

1)compass needle type frequencymeter,罗盘针型频率计

2)compass frequency tester,罗盘频率检测仪

3)frequency preset box,罗盘频率预调盒

4)compass needle,罗盘指针

5)dial plate,罗纹针盘

6)magnetic needle compass,磁针罗盘

用法和例句

Design of radio compass frequency tester for a certain type of fighter;

某型飞机无线电罗盘频率检测仪的设计

Tell me, does the magnetic virtue of the needles of the compasses of all those ships attract them thither?

你说吧，是不是那些船只的罗盘指针的磁力把他们吸引来的？

The needle of a compass always points to the north.

罗盘的指针永远指向北。

A compass needle points north.

罗盘的指针永远指向北方.

in the form of a card that rotates so that 0 degrees or North points to magnetic north.

一种旋转的像罗盘的片状指南针，所以零度或北方能够指向磁北。

Deflection of a compass needle caused by local magnetic influence, especially on a ship.

罗盘偏差指南针由于局部磁场的影响发生偏移，尤指在船上

One of the four major pisions of the horizon as determined by the four major points of the compass.

象限由罗盘上四个主要指针确定的四个主要地平方位中的一个

Afterward, compass needles that normally point north would point south, and during the thousands of years of transition, much in the heavens and Earth would go askew.

后来，通常指向北方的罗盘针指向南方，而在数千年的转换期间，多数在天空而地球会倾斜。

The needle, dial, or other registering device on such an instrument.

指针这些仪表上的针、盘或其它指示用工具

The iron in the ship caused a deviation of the magnetic needle of the compass.

这块在船上得铁引起罗盘磁针的背离。

Pry the crankshaft forward, position the dial indicator to zero.

向前撬曲轴，定位针盘指示表到0。

reset a dial, gauge, control, etc at zero

把刻度盘、 仪表、 控制器指针拨回至零位.

dial-needle heat-efficiency meter

度盘指针式热效率测定仪

a watch that represents time by the position of hands on a dial.

通过表盘上的指针显示时间的表。

Hold Differential Case and Read Dial Indicator

固定差速箱，并读针盘指示表

A slender pointer or indicator on a dial, scale, or similar part of a mechanical device.

指针标度盘、刻度或机械装置的类似部分上的细长指针或指示器

Location or position relative to the points of the compass.

定向与罗盘所指相关的地点或位置

Chinese compasses always point south!

中国的罗盘总是指向南方!

Loosen screw of pointer on indicating dial, set pointer pointing to “CL0SE”, then fix screw .

松开开度指示盘上的指针螺钉，使指针与刻度盘上的“关”对齐，再将螺钉拧紧。