基本释义:

爆燃(燃烧)

网络释义

1)Deflagration,爆燃(燃烧)

2)detonative combustion,爆震燃烧

3)combustion knock,燃烧爆击

4)combustion knock,燃烧爆音

5)combustion knock,燃烧爆震

6)combustion explosion,燃烧爆炸

用法和例句

Studying Experimentally Performances of a Pulse Detonation Combustor (PDC) Integrated with a Turbine

脉冲爆震燃烧室与涡轮组合的性能试验研究

Experimental investigations of interaction of a pulse detonation combustor with a turbine

脉冲爆震燃烧室与涡轮相互作用的试验

Correlation of Knock Sensor Signal and HCCI Engine Combustion Parameters

爆震传感器信号与HCCI发动机燃烧参数的相关性

Effects of Octane Number and Premixed Ratio on the Knock and Combustion Characteristics of Dual-fuel SCCI

辛烷值和预混合率对双燃料发动机SCCI燃烧与爆震的影响

shock absorber combustion head

减震燃烧(式)缸头

Detonation is a secondary explosion that occurs in the combustion chamber after the spark jumps the sparkplug gap.

爆震是在燃烧室内当火花跳过火花塞电极间隙以后发生的一种二次爆燃。

Research on Relativity of Knock Sensor Signal and HCCI Engine Combustion Parameters;

爆震传感器信号与HCCI发动机燃烧参数相关性的研究

A pounding or clanking noise made by an engine, often as a result of faulty fuel combustion.

爆震声发动机发出的震动或撞击的声音，通常是由于燃料燃烧不足引起

The noncombustible debris produced by the blast frequently covered and prevented the burning of combustible material.

由于爆震波所造成的非燃性瓦砾常常把易燃材料复盖因而可防止其燃烧。

Performance Research of the Internal-Combustion Engine s Knock and the Knock Sensor;

内燃机爆震与爆震传感器的性能研究

explosive combustion

爆炸性燃烧冲击波的燃烧

Study On the Explosive Course of 12.7 mm-bored Armour-Piercing Explosive Incendiary Cartridge;

12.7毫米穿甲爆炸燃烧弹爆炸过程研究

Research on Ignition and Extinguishing by Explosion of High Explosive

猛炸药爆炸燃烧与爆炸灭火应用研究

Relatively little effort has been expended in this country to applying two-phase detonation theory to the combustion stability problem.

在把两相爆震理论应用于燃烧稳定性方面，该国家几乎没做过多少工作。

Burns Complicated with Blast Injury-Analysis of 43 Cases

烧伤合并爆震伤(附43例病例分析)

Numerical Simulation of Deflagration to Detonation Transition in Coke Powder-Oxygen Mixture

焦炭粉-氧气混合物爆燃向爆震转捩的数值模拟

An explosion is nothing more than a tremendously rapid burning.

译文：爆炸只不过是非常急速的燃烧。

gas mixture metal forming

混合气燃烧爆炸的金属成形