基本释义:

冲击挤压加工

网络释义

1)impact extrusion,冲击挤压加工

2)impact extrusion,冲击挤压

3)impact extrusion press,冲击挤压机

4)extrusion,挤压加工

5)extrusion process,挤压加工

6)extruding processing,挤压加工

用法和例句

Hazelett strip casting process is already successfully used for producing slug for impact extrusion.

哈兹列特铝板带连铸连轧工艺已被成功地用于铝和铝合金冲击挤压用坯料的生产。

Primary study on coffee substitute prepared by extrusion of wheat germ and soybean

大豆和麦胚芽挤压加工咖啡替代物的初步研究

This paper mainly discussed the effects of nutritional properties on extrusion process,and described the effects of extrusion process parameters such as feed speed,feed moisture content,barrel temperature on protein,starch,fat,vitamins,available lysine,activity of urease,revealed the effects of extrusion process on nutritional quality from another perspective.

分析挤压加工过程中,挤压工艺参数对食品营养品质的影响。

Triturated food prepared by extrusion of wheat germ and cornmeal was studied with referent indexes of sensory characteristics.

结果表明:麦胚芽经挤压加工后粗纤维含量下降达46。

This article compares extrusion process with conventional processes in some peducts .

本文通过将挤压蒸煮方法与传统加工方法在一些产品的加工方面进行对比，显示了挤压加工的优势和经济性，指出食品挤压加工是今后食品工业发展的一个方向。

A kind of aluminum alloy profile with high conductivity and high yield strength was produced by extrusion process test,its conductivity is up to 60%IACS,yield strength(σ0.

用正交试验法对比分析了纯铝合金中添加Fe、Cu、Mg、Zn对其电导率及屈服强度的影响程度;并由此进行成分配比,通过挤压加工试验,研制生产出一种高电导率高屈服强度铝合金型材,H112状态电导率达60%IACS左右、屈服强度σ0。

The influence of extruding processing on the water retention capacity of insoluble diet fiber(IDF)was studied and the optimum parameters were obtained:material water content 30%;processing temperature 140 ℃;screw speed 100 r/min.

为此,研究了挤压加工对米糠中IDF持水力的影响,并获得了最优挤压加工参数组合为:原料含水量30%,挤压温度140℃,螺杆转速100r/min。

It is conducive to the choice of exclusion equipment.

这对挤压加工设备的选用有积极作用。

Study on lubricants and cooling method for warm extrusion

温挤压加工中润滑剂与冷却方式研究

Research on Experiment and Numerical Simulation of Soy Protein Extrusion Texturization;

大豆蛋白质挤压加工的实验与数值模拟研究

Impact of extrusion process on acid value and peroxide value of rapeseed oil

挤压加工对菜籽油酸价及过氧化值的影响

Influence of Extrusion on Diet Fiber in Defatted Rice Bran

挤压加工对脱脂米糠中膳食纤维影响的研究

Primary study on coffee substitute prepared by extrusion of wheat germ and soybean

大豆和麦胚芽挤压加工咖啡替代物的初步研究

metal transformation process (rolling, forging, extruding, heat treating)

金属加工工艺(轧制、锻造、挤压、热处理)

Study on the New Technology of Using Twin-Screw Extruder to Produce Textured Fish;

双螺杆挤压重组鱼肉加工新技术研究

Study of Applicability on Extrusion Texturization Processing of Soybean Varieties

大豆品种挤压组织化加工适用性研究

The Application of the Backward Extrusion in the Fabrication Process of Silver Alloy Materials

反向挤压在银合金材料加工中的应用

Manufacture and design on core-inlaid extrusion die for aluminum profile

铝型材镶芯式挤压模具的设计与加工

Studies on Extrusion Processing Technique for Blood Meals and the Improvement Ofextruder;

挤压膨化血粉加工工艺研究及膨化机的改进

The study on the hot extrusion working parameters of inconel 690 based on processing maps

基于热加工图的inconel 690合金挤压工艺参数研究

Investigation on hot working processes of LD steel for heavy-loaded cold extrusion moulds

重载冷挤压模具用LD钢热加工工艺探讨

The technique of Squeeze Liquid Film Damping is adopted in precise boring.

在精镗孔加工中采用挤压液膜阻尼技术。

The Study on Multi-Load Warm-extruding Forming Technology of Square Tee Valve;

方三通件多向加载温挤压成形工艺研究

Study on operation parameters during extruding caramel pigment

挤压机操作参数对加工固体焦糖色素的研究

Warm Extrusion Forming Technology with Multi-direction Load and Die Design for Abnormal-axes

异形轴多向加载温挤压成形工艺及模具设计