基本释义:

合金稚分

网络释义

1)main alloying component,合金稚分

2)Alloy Composition,合金成分

3)alloying component,合金成分

4)alloy component,合金成分

5)alloy ingredient,合金组分

6)molecular alloys,分子合金

用法和例句

The effect of alloy composition and production proces on the hardness of zinc slug for dry cells produced by four wheel type continuous casting and rolling process is expounded with the optimized alloy composition and production process for achieving suitable hardness proposed.

结合四轮轮带式连铸连轧生产线生产电池锌饼卷坯的特点,阐述合金成分与生产工艺对电池锌饼硬度的影响,指出生产合适电池锌饼硬度最优化的合金化学成分与生产工艺条件。

The ballistic performance has been improved to reach the index demand by the adjustments of 7A52 Al alloy composition and heat treatment.

通过对 7A5 2铝合金成分与热处理工艺设计调整 ,提高了抗弹性能 ,达到了防弹衣指标要求 ,并投入了小批量生产 ,现已装备应

The relations between alloy compositions,preparation process parameters and magnetic properties are discussed.

讨论了合金成分及制备工艺与纳米晶复合永磁材料磁性能的关系,分析了稀土含量、添加合金化元素、快淬速度、晶化退火温度和时间对合金磁性能的影响机理,综述了纳米晶复合永磁材料开发研究的现状、存在问题及发展方向。

The typical structure and basic composition of Ti(C,N)-based cermets are described briefly,and the influence of alloying component on the structure and the mechanical properties of Ti(C,N)-based cermets are depicted.

介绍了Ti(C,N)基金属陶瓷的基本组成和典型结构,概述了Ti(C,N)基金属陶瓷合金成分对组织结构和力学性能的影响,总结了Ti(C,N)基金属陶瓷的研究现状,并展望了其发展前景。

Many factors have been confirmed to influence the sulfidation behavior of the iron aluminides intermetallics such as alloying component, corrosion atmosphere, temperature and pretreatment conditions.

影响铁铝金属间化合物高温硫化腐蚀的因素主要有:合金成分、腐蚀气氛、温度、预处理工艺等。

This paper completely expatiates on the effect factors and brittleness of γ-type TiAl intermetallics compound at room temperature from four aspects: crystal structure dimension, alloy component, distortion dislocation and electron structure.

本文对影响γ-TiAl金属间化合物的室温脆性的因素从晶体结构尺寸、合金成分、变形位错、电子结构等四个方面进行了比较全面的阐述,得出结论:空间电荷的均匀分布有利于γ-TiAl合金室温塑性的改善。

The proper alloy components, casting process and extrusion process for aluminium alloy profile used in car door are obtained.

通过每个工序的多次试验,得出适用于轿车门型材的最佳铝合金成分、铸造和挤压工艺参数,保证了轿车门铝合金型材的组织、抗拉强度和弯曲成形等使用性能。

The influence of alloy ingredient on corrosion resistance of ternary boride cermet clad materials was studied.

研究了合金组分对覆层材料耐腐蚀性的影响。

A novel type of magnetic material molecular alloys is described.

文章介绍一种新型“分子合金”类磁性材料 。

The Optimization of Constituent of Casting AlSi7Cu2Mg Alloying and Studies on Organization, Performance

铸造AlSi7Cu2Mg合金成分优化及组织、性能研究

unwrought button metal alloys (zinc predominating)

未锻造的金属合金粒（锌是主要成分）

Permanent Mold Casting Pb-4Sb Alloy

分面成形法金属型铸造Pb-4Sb合金

Study on enrichment methods of native gold including the fineness analysis of it and billon

自然金的富集方法及它与金合金的成色分析

Alloy Phases Control and Chemical Components Optimization of ZK60 Magnesium Alloy;

高强度变形镁合金ZK60合金相的控制与成分优化

Composition Design and Laser Fabrication of Nickel-based Intermetallic Compound Alloys;

Ni基金属间化合物合金的成分设计与激光制备

Composition Measurement and Error Estimation of Cu-Ni-Zn Alloy;

Cu-Ni-Zn合金常量成分测定及误差分析

The Predict of Phase Composition and Pahse Amount and Sublattice Composition in Ni Base Superalloys;

镍基合金相成分、相含量及γ’相亚点阵成分预测

Synthesis and Properties of Amidinate Supramolecular and Metallic Coordination Compounds

脒基超分子聚合物和金属配合物的合成及性质

Study on the microsegregation in as-cast microstructures of a precious metal cer amic alloy

贵金属烤瓷合金铸态组织成分偏析研究

A chemical constituent( element or compound) of an alloy, which may be used to specify its composition.

合金的任一组成（以是元素或化合物）可以被用于区分其构成成分。

One of these alloys contained a high percentage of chromium.

这些合金中的铬占了很大的成分。

Newton's alloy (bismuth predominating)

牛顿合金（铋是其中主要成分）

cobalt chromium tungsten alloy (cobalt predominating), unwrought

钴铬钨合金（钴为主要成分）,未经锻造

Wrought aluminium and aluminium alloys--Chemical composition limits

GB/T3190-1996变形铝及铝合金化学成分

darcet's alloy (bismuch predominating)

铋铅锡低熔点合金,（铋为主要成分）

elektron metal (magnesium predominating ),unwrought

镁合金（主要成分为镁）未经欠帐造

magnesium-aluminium-zinc alloy (magnesium predominating), wrought

镁铝锌合金（镁是其中主要成分）,经锻