基本释义:

焊接参数

网络释义

1)welding parameter,焊接参数

2)welding parameters,焊接参数

3)weld parameter,焊接参数

4)welding electrical parameters,焊接电参数

5)welding electric parameters,焊接电参数

6)welding condition,焊接条件，焊接工艺参数

用法和例句

Development and utilization of frictional welding parameter automatic detecting system for drill pipe;

钻杆摩擦焊接参数自动检测系统的研制及应用

A system of welding parameter collection and analysis based on LabView VI;

基于LabView虚拟仪器的CO_2焊接参数采集分析系统

Influences of welding parameters on weld appearance in laser-MIG hybrid welding of AZ31

AZ31激光-MIG复合热源焊接参数对焊缝形貌的影响

Influence of Nd:YAG laser+pulsed GMAW arc hybrid welding parameters on weld width;

Nd:YAG激光+脉冲GMAW复合热源焊接参数对焊缝熔宽的影响

TIG welding rapid prototyping neural networks welding parameters controller;

TIG焊快速制造神经网络焊接参数控制器

Effect of laser welding parameters on formation of cold-worked die steel weld metal

激光焊接参数对冷作模具钢焊缝表面成形的影响

Development of real-time measuring system for fricition weld parameter of drill pipe;

钻杆摩擦焊接参数实时检测系统的研制

In order to research the influence rule of weld parameter to double side form with single side weld, the best parameter of double side form with single side weld were put forward through test of 16Mn at 6mm?8mm?10mm and 12mm,and the influence rule of parameter changing was found.

为了研究焊接参数对单面焊双面成形尺寸的影响规律,通过对16Mn板厚6、8、10、12mm材料的试验,确定了其单面焊双面成形的最佳参数,并找出焊接参数变化对单面焊双面成形尺寸的影响规律。

A new arc welding-quality analyzer developed by University of Hanover of Germany could be used in the statistical analysis on the value of the arc voltages and welding current,and could provide some relative information on physical property of welding arc,it was a new method of analyzing welding electrical parameters.

德国汉诺威大学开发的汉诺威弧焊质量分析仪能够对焊接过程电弧电压、焊接电流信号随机进行统计处理,提供焊接电弧物理特性相关数据信息,是焊接电参数分析的一种新技术手段。

In order to guarantee the stability of welding process and the dependability of welding quality, it is very essential to monitor welding electric parameters of welding process.

　为保证焊接过程的稳定性和焊接质量的可靠性,在焊接过程中对焊接电参数的监测十分必要。

In this paper,the welding electric parameters of self-shielded flux-cored wire (SSFCW) were tested and analyzed by Hannover welding quality analyzer.

采用汉诺威焊接质量分析仪对自保护药芯焊丝(SSFCW)的焊接电参数进行了测试分析,发现电压标准偏差ΔU越小,电流标准偏差ΔI也越小,其变异系数δU和δI也越小,电弧稳定性越好。

Effect of welding parameters on aluminum alloy VPPA weld formation

焊接参数对铝合金VPPA焊缝成形的影响

Research on System of Seam Detection and Weld Parameter Control in Automatic Pipeline Welding;

管道自动焊接中焊缝检测和焊接参数控制系统的研究

Influence of Welding Parameters on Process Control of Meso-Spray Transfer in Pulsed-MIG Welding of Aluminum

焊接参数对铝脉冲MIG焊亚射流过程控制的影响

Influences of welding parameters on weld appearance in laser-MIG hybrid welding of AZ31

AZ31激光-MIG复合热源焊接参数对焊缝形貌的影响

Optimization of Welding and Artificial Aging Parameters for 7A52 Super-hard Aluminum Alloy

7A52超硬铝合金焊接参数与人工时效参数的优化

Automatic Weld Parameter Set-Up including Pnelmate screen display.

焊接参数自动设定,包括盘面屏幕显示

Effects of TIG Processing Parameters on Microstructure and Properties of GH99 Superalloy Welded Joint and Simulating

TIG焊焊接参数对GH99焊缝组织性能的影响及模拟预报

Influences of Welding Parameters on Weld Appearance in Laser-plasma hybrid Welding

激光-等离子电弧复合焊接参数对焊缝成形的影响

Effect of laser welding parameters on formation of cold-worked die steel weld metal

激光焊接参数对冷作模具钢焊缝表面成形的影响

Study on Influence of Welding Process Parameters on Strength of Welded Joint

焊接工艺参数对焊接接头强度的影响研究

Measuring the Electric Parameters of Welding Consumables and Their Usability Analysis;

焊接材料焊接电参数测试及其工艺性分析

Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange

加氢换热器角焊缝密封接头焊接工艺参数优化

The Feature Vector of Welding Electrical Parameters in Seam Tracking of Robot-based Weaving Welding;

弧焊机器人摆动跟踪时的焊接电参数特征

Study on Correlation between Resistance Spot Welding Parameters and Weld Quality;

电阻点焊参数与焊接质量的相关性研究

Welding Procedure Parameters Design System for Robot

弧焊机器人焊接工艺参数设计系统研究

Study on Relationship Between Welding Parameters and Weld Shape in Electron Beam Welding

1Cr18Ni9Ti电子束焊接工艺参数与焊缝形状的关系研究

sential variables

管子与管板焊接的主要参数

Parametric Welding Deformations Prediction of Ship Hull Blocks;

参数化的船体平板分段焊接变形预测