基本释义:

火切

网络释义

1)cracking off,火切

2)Flame cutting,火焰切割

3)flame pipe cutting,火焰切管

4)flames cutter machine,火切机

5)flame-cut crack,火切裂纹

6)flame cutting,火切割

用法和例句

Discussion of cutting quality of the CNC flame cutting machine;

提高数控火焰切割机切割质量

Realization of Cutting Gap Compensation for NC Flame Cutting Machine;

数控火焰切割机割缝补偿的实现

In the light of the conditions that should possess for guaranteeing the welding quality in the construction,controlling and correcting the thermal deformation of steel plate in the process of flame cutting and welding,and welding with the protection of the CO2 gas,this paper advances a series of preventive measures.

针对施工过程中焊接质量的保证,控制纠正钢板在火焰切割及焊接过程中的热变形、二氧化碳气体保护焊接应具备的条件,提出了一系列防治措施。

The NC system of a five-axis machining tool for flame pipe cutting that we develop meets the requirements for cutting pipes of various kinds.

研制了一种五轴联动数控火焰切管机床的数控系统,该系统可满足多种类型管件的加工要求。

Based on the process control and requirement of the continuous casting machine(CCM),with the PLC control system,full automatic cntrol of cut-to-length was realized by combining cutting technology of the flames cutter machine with manipulating the imagines to length of steel billet by untouched-mode.

介绍了在结合连铸机生产过程控制及其要求的基础上,在PLC系统控制下,采用火切机切割和非接触式图像定尺控制技术相结合,实现了连铸机定尺切割的全自动的设计。

The flame-cut crack is the main defect that affects the quality of the high-carbon steel slab.

火切裂纹曾是长期影响高碳钢板坯质量的主要缺陷,本文通过近年来的调查和现场试验,阐述了高碳板坯在火焰切割时裂纹产生的机理,对钢的成分、受力状态、形变速度、形变温度以及周围的环境温度等因素对板坯火切裂纹的影响进行了研究,并结合工作实际介绍了热切和合金化等控制火切裂纹的行之有效的办法。

microprocessor controlled flaming cutting machine

微处理机控制火焰切割机

The Research of Numerical Control System of Flaming Cutting Machine;

基于ARM的火焰切割数控系统的研究

Design of Controlling System of Economical NC Flame Cutter;

经济型数控火焰切割机控制系统研制

Practice of Electrical Transformation of Flame-cutting Machine for Slab Continuous Casting

板坯连铸火焰切割机的电气改造实践

Development of NC System for NC Flame Cutting Machine Based on IPC;

基于IPC的数控火焰切割机数控系统开发

The CNC Torch Cutting Automatic Programming Software Exploitation Based on AutoCAD 2000;

基于AutoCAD2000的数控火焰切割自动编程软件的开发

Research and Development of Automatic Programming System for CNC Flame Cutting

数控火焰切割自动编程系统研究与开发

The Configuration Method and Practice on the Height Control System of Flame Cutter

火焰切割机高度控制系统配置方法与实践

Application of Automation Flame Cutting Machine in Heavy Plate Production

自动火焰切割机在厚板生产领域的应用

Application of the CNC Flame Cutting Technique for Production

数控火焰切割技术在生产过程中的应用

Design of the Mechanical System of The Equipment Used in CNC Flame Cutting of H-type Steel

H型钢数控火焰切割设备机械系统设计

The Design and Realization on Control Algorithm of Flame Cutting Machine in Polar Coordinates System

极坐标式火焰切割机控制算法的设计与实现

The capacitance automatic height adjusting control system of lar-ge flame cutting machine is presented in the paper.

本文介绍了大型火焰切割机单割炬电容自动调高控制系统。

Machine flame cut edges were accepted at the discretion of the engineer.

机械火焰切割的边缘经过工程师的鉴定，可以验收。

Principle of Programmable Controller and Its Applications in the CNC for a Flame Cutting Machine

可编程序控制器的原理及其在火焰切割机数控系统中的应用

Optimized Design for Auto-adjusting Height System in NC Flame Cutting Machine Based on Complex Genetic Algorithm

基于混合遗传算法的数控火焰切割机自动调高系统的优化设计

Design of DC Motor Control System in NC Flame Cutter Height Automatic Adjustment Device

数控火焰切割机自动调高器中直流电机控制系统设计

Study of the Automatic Adjusting Technic of Flame Cutting Slab Cut Length System in Slab CCM

板坯连铸机二次火焰切割铸坯定尺自动无级调节技术的研究