基本释义:

混炼

网络释义

1)mixing,混炼

2)mix,混炼

3)compounding,混炼

4)CB scorch,A炼混炼胶

5)mixing in internal mixer,密炼机混炼

6)mixing mechanism,混炼机理

用法和例句

The experimental study of polyester short fiber enhanced tread rubber mixing process;

聚酯短纤维增强胎面胶混炼工艺的实验研究

Rheological property of HAF-filled powdered SBR during mixing;

HAF填充型粉末SBR的混炼流变性能

The power curve sontrolling method for discharging batches from an internal mixer is a new technique to mix rubber in the internal mixer,which can govern the mixingprocess by adjusting the power curve.

用功率曲线控制密炼机排胶的方法是控制密炼机混炼工艺过程的方法之一。

CB scorch during mixing has great opposite influence on surface quality of automotive seals.

用K5密炼机进行A炼混炼胶,发现有表面不光滑现象,影响到密封零件的表面质量,并造成浪费。

Elaborated on the structure characteristics and mixing mechanism of VCMT synchronous rotor with 6-wing,and through experiments analyzed the effect of VCMT synchronous rotor with 6-wing on carbon black dispersion and rubber mechanics performance.

详细阐述了六棱VCMT同步转子的结构特点、混炼机理,并通过实验讨论了六棱VCMT同步转子对炭黑分散性及胶料力学性能的影响。

The mixing mechanism of a new kind of extruder-series disc extruder was studied.

文中阐述了一种新型连续混炼设备———串联式磨盘挤出机的混炼机理 ,采用串联式磨盘挤出机和同向平行双螺杆挤出机对聚苯乙烯 /四氧化三铁 /丙烯酸、高密度聚乙烯 /纳米氢氧化镁进行挤出混炼效果研究 ,通过显微照片和图像分析对共混物微观混炼效果进行数学统计分析 ,发现串联式磨盘挤出机混炼性能明显优于同向平行双螺杆挤出机 ,而且改变其磨盘间隙及螺杆转速可以达到不同的混炼效果。

Based on the development of the WXJ-140 reciprocating single screw pin-barrel extruder,the design principle,dynamic simulation of the plasticating system and driving system,mixing mechanism,fluid flow and mix inside the screw elements,and the experimental measurement and modeling of the residence time distribution in the extruder were studied here.

本文以WXJ-140往复式单螺杆销钉挤出机的研制开发为主线,对往复式单螺杆销钉挤出机的设计原理、挤压系统和传动系统运动仿真、混炼机理、螺纹元件内物料三维动态流动过程以及停留时间分布测量和建模等方面进行探索和研究。

The Numerical Calculation of Mixing for Archimedes Spiral Mixing Disc

阿基米德螺线式混炼盘混炼效果的数值计算

The Mixing Mechanism and Experimental Study of Rotor Apply to New-Style Continuous Mixer;

新型连续混炼机转子的混炼机理及实验研究

Finite Element Analysis of the Flow Field of a S-Shaped Rotor Farrel Continuous Mixer;

S形转子连续混炼机混炼段流场的有限元分析

Research on Mixing Mechanism and Finite Element Simulation of Rubber Continuous Mixer

橡胶连续混炼机混炼机理及有限元模拟研究

Mixing Effect of Twin-rotor Continuous Mixer with Different Rotors

不同转子的双转子连续混炼机混炼效果的比较

Mixing simulation of twin-rotor continuous mixer with different rotors

双转子连续混炼机不同转子的混炼模拟

Study on Chaotic Mixing Process of A Two-rotor Continuous Mixer

双转子连续混炼机中的混沌混合行为研究

actual mixing cycle

实际混炼周期(不包括密炼机进胶排胶时间)

The Theoretical and Experimental Research about Mixing Rubber in Synchronous Rotor Internal Mixer;

同步转子密炼机混炼橡胶的理论和实验研究

The Mixing Mechanism and Experimental Study of Four-Wing VCMT Synchronous Rotor Internal Mixer;

四棱VCMT同步转子密炼机混炼机理及实验研究

Study on Mixing Process Simulation of Mixer Internal Flow Field and Temperature Field;

密炼机混炼过程中流场和温度场的模拟研究

Study on Mixing Mechanism and Experiment in Six-Wing Synchronous Rotor Internal Mixer;

新型六棱同步转子密炼机混炼机理及实验研究

Study on Mixing Technology of VIC Mixer for Silica Filled Compound

VIC型密炼机用于白炭黑胶料混炼工艺的探讨

The effect of filling coefficient on the mixing properties of synchronous rotor mixer

填充系数对同步转子密炼机混炼性能的影响

Optimization of the Rotors of the Twin-Rotors Continuous Mixer and Studying of Its Mixing Mechanism

双转子连续混炼机转子结构的优化及混炼机理的研究

Influence of Compounding Process on the Properties of Styrene-Butadiene Rubber/Butadiene Rubber/Carbon-Black Blends

混炼工艺对SBR/BR/CB共混硫化胶性能的影响

Statistical Analysis on Mixing Process of A Two-rotor Continuous Mixer

双转子连续混炼机混合过程的统计学分析

total-mixing cycle

总混炼周期(包括装料排胶时间)