基本释义:

挤锻压加工

网络释义

1)swaging,挤锻压加工

2)stamping,锻压加工

3)extrusion,挤压加工

4)extrusion process,挤压加工

5)extruding processing,挤压加工

6)extrusion forging technique,挤压锻造工艺

用法和例句

Primary study on coffee substitute prepared by extrusion of wheat germ and soybean

大豆和麦胚芽挤压加工咖啡替代物的初步研究

This paper mainly discussed the effects of nutritional properties on extrusion process,and described the effects of extrusion process parameters such as feed speed,feed moisture content,barrel temperature on protein,starch,fat,vitamins,available lysine,activity of urease,revealed the effects of extrusion process on nutritional quality from another perspective.

分析挤压加工过程中,挤压工艺参数对食品营养品质的影响。

Triturated food prepared by extrusion of wheat germ and cornmeal was studied with referent indexes of sensory characteristics.

结果表明:麦胚芽经挤压加工后粗纤维含量下降达46。

This article compares extrusion process with conventional processes in some peducts .

本文通过将挤压蒸煮方法与传统加工方法在一些产品的加工方面进行对比，显示了挤压加工的优势和经济性，指出食品挤压加工是今后食品工业发展的一个方向。

A kind of aluminum alloy profile with high conductivity and high yield strength was produced by extrusion process test,its conductivity is up to 60%IACS,yield strength(σ0.

用正交试验法对比分析了纯铝合金中添加Fe、Cu、Mg、Zn对其电导率及屈服强度的影响程度;并由此进行成分配比,通过挤压加工试验,研制生产出一种高电导率高屈服强度铝合金型材,H112状态电导率达60%IACS左右、屈服强度σ0。

The influence of extruding processing on the water retention capacity of insoluble diet fiber(IDF)was studied and the optimum parameters were obtained:material water content 30%;processing temperature 140 ℃;screw speed 100 r/min.

为此,研究了挤压加工对米糠中IDF持水力的影响,并获得了最优挤压加工参数组合为:原料含水量30%,挤压温度140℃,螺杆转速100r/min。

Compound optimization technique based on numerical simulation induction knowledge for the optimization of extrusion forging technique was put forward.

分析了基于人工智能中的归纳学习方法,提出了一种针对挤压锻造工艺优化的基于数值仿真归纳知识的混合优化方法,并通过一个挤压锻造的实例验证了该方法的有效性。

Because of very low in the proportion of blanks made from bar and tube, the forging process is still a basic process obtained blanks in our bearing factories.

我国轴承制造厂采用管料和棒料供坯的比重很小,锻压加工仍是毛坯的基本加工工序。

metal transformation process (rolling, forging, extruding, heat treating)

金属加工工艺(轧制、锻造、挤压、热处理)

CNC machining of forging dies for Diesel engine crankskafts

柴油发动机曲轴锻压模具的数控加工

Forging Simulation of Ti-1300 Alloy by Hot Compressing Testing

Ti-1300合金锻造加工的热压缩模拟

but excludes sheet metal working machinery and metal-forming and forging machines.

但不包括金属板加工机，金属成形机与锻压机。

Quality Control of Hot-working Process for Large-sized Forging Reactor Pressure Vessel

反应堆压力容器大型锻件热加工质量控制研究

These arise from machining, grinding, straightening, welding, casting, spinning, forging, and rolling operations, which will also furnish a marked contribution to the shape change.

经过加工、磨削、调直、焊接、铸造、钻孔、锻造和滚压等操作工序，对工件形状变动影响很大。

In this paper,an extrusion-forging process for a knuckle of Benz heavy truck is introduced,which includes four steps: Upsetting,extrusion,pre-forging and forging.

奔驰重型卡车的转向节挤压锻造工艺,分为镦粗、挤压、预锻和终锻4个工步。

European Committee of Forging and Stamping Industries

欧洲锻件和模压工业委员会

Technics Research on Extrusion and Precision Forging for JX1030 Back-bridge Axle Shaft Sleeve;

JX1030半轴套管体挤压精锻工艺研究

Modeling research on FM forging process of heavy low-pressure turbine rotor

大型低压转子FM法锻造工艺模拟研究

Optimization of the die forging process of TC11 alloy compressor disks

TC11钛合金压气机盘的模锻工艺优化

Study on Liquid State Die-forging Process for Pressure Intensifier Cover and Bottom of Magnesium Alloy

增压器盖、底镁合金液态模锻工艺研究

Response Characteristic of Fluid Pressure in Operating Cylinder for 300MN Die Forging Hydraulic Press

300MN模锻水压机工作缸压力动态响应特性

casting of non-malleable iron, in the rough state

未加工铸件,不可锻铸铁制

casting of malleable iron or steel, in the rough state

未加工铸件,可锻钢或铁制

Energy-Saving Emission Reduction and Equipment in the Field of Theromechanical Processing

铸锻热加工行业节能减排技术及设备

SOFTWARE REALIZATION OF PRESSURE AND TEMPERATURE CONTROL ON GAS HEATING FURNACE FOR FORGING

锻造煤气加热炉压力及温度控制软件的实现