基本释义:

冷挤制

网络释义

1)Extrusion cold,冷挤制

2)clod hobbing,冷挤压制模

3)cold pressing type suppository making machine,冷挤压制栓机

4)cold hobbing press,冷挤制模压力机

5)cold extrusion,冷挤

6)cold extrusion,冷挤压

用法和例句

This article describes the key points of cold extrusion for P/M gears,concerning about equipment,the extruding head gears and the precision of the P/M gear blanks.

本文介绍了冷挤粉末冶金齿轮的关键是设备、挤轮和被冷挤前齿轮的基础精度。

This article takes the nut of car wheel flange as an example,and compares with two forming techniques of this kind of parts,that is heat pressing and cold extrusion.

以车轮法兰面螺母为例 ,对此类零件的两种成形工艺热压与冷挤工艺进行比较 ,论述了其工艺、变形以及模具设计的相关问

Study on precise cold extrusion technology of 6061 Al-alloy splines shell;

6061铝合金花键壳体冷挤压工艺研究

Failure analysis on fissuring of high-speed steel cold extrusion die plate;

高速钢冷挤压凹模开裂失效分析

Design of cold extrusion die for axle sleeve with internal saw tooth;

锯齿状内齿轴套冷挤压模设计

Assab special steel

冷挤压冲模用特殊钢

Failure Mechanism Analysis of the Cold Extrusion Combination Concave Die and Numerical Simulation of the Extrusion Process

冷挤压组合凹模失效分析及挤压过程数值模拟

The blank treatments before cold extrusion were also drawn up and the die structure of the cold extrusion was designed.

拟制了冷挤压前的毛坯处理及设计了冷挤压模具结构。

Research on the Key Technology of Cold Forging of Spur Gear;

直齿轮冷挤压成型若干关键技术研究

Study on Extrusion Deformation Laws and Technics for the Covering Element;

罩体冷挤压成型变形规律及工艺研究

The Best Calculation of Technological Gradient for Plastic Mould Cavity by Cold-Pressing;

塑料模冷挤型腔最佳工艺斜度的计算

Research and Application of CAPP for Cold Extrusion Process

冷挤压工艺设计CAPP系统的研究及应用

Research on Cold Extrusion Forming Technics of Micro-vehicle's Half Axle Spline

微型车半轴花键冷挤压成形工艺研究

Study on the Compound Strengthening Technique of CrWMn Steel Cold Extruding Die

CrWMn钢冷挤压模具的复合强化工艺研究

Application of Cold Extruding Technology of Spur Gears

冷挤压技术在圆柱齿轮成形中的应用

Technological Analysis and Cold Extrusion of Two-exit Components with Ring Shape

两出口环形件的冷挤压成形工艺研究

Process optimization of clutch block cold extrusion based on DEFORM-3D

基于DEFORM-3D的离合块冷挤压工艺优化

Compound Cold Extrusion of 7A04 High Strength Aluminum Alloy

7A04铝合金复合冷挤压成形工艺的研究

Cold Extrusion Process and Die Design of Cups with Bosses

圆形凸台件的冷挤压工艺及模具设计

Development and Application of CAPP for Cold Extrusion Process

冷挤压工艺设计CAPP系统的开发与应用

The Study on the Failure Formals and the Extension Life Methods of the Extrusion Punch

冷挤压凸模失效形式及延寿方法研究

Study on the Stress Distribution of Cold Extrusion Die under Inner Pressure

冷挤压模受内压作用应力分布规律的研究

Cold-extrusion process and die design of plane-chair-clasp cylinder

航空座椅锁扣缸体冷挤压工艺及模具设计