基本释义:

磨料颗粒

网络释义

1)abrasive particles,磨料颗粒

2)erosion of particles,颗粒磨蚀

3)Wear debris,磨损颗粒

4)wear particle,磨损颗粒

5)wear particles,磨损颗粒

6)Moji granules,磨积颗粒

用法和例句

Analysis of forces acting on abrasive particles in abrasive water jet;

磨料水射流中磨料颗粒的受力分析

The methods used to monitor the abrasive particles suction process,the water orifice condition,the focus tube condition and wear were reviewed and their advantages and disadvantages were also analyzed,respectively.

综述了磨料水射流工艺控制过程的最新研究与进展;分别介绍了磨料颗粒吸入过程、水喷嘴状况和准直管工作状况以及磨损控制等方面的进展,并分析了各种方法的优缺点;提出了采用专家系统来监测切割过程中多个参数变化以优化切割过程的方法。

The control equations for both the abrasive particles and the rock were also provided.

根据连续介质力学和有限元理论,给出了磨料水射流破岩系统中磨料颗粒和岩石的控制方程及相应的有限元列式,建立了适用于磨料水射流破岩全过程分析的岩石损伤模型。

Experimental studies on erosion of particles in fluidized bed of coarse particles;

大颗粒流化床中颗粒磨蚀的实验研究

Objective To observe and compare the expression of inducible nitric oxide synthase(iNOS) and peroxynitrite anion(ONOO~-)induced by alumina and ultra-high-mdeunlar-weight polyethylene wear particles and to investigate the mechanism of the periprosthetic osteolysis induced by wear debris during aseptic loosening.

目的研究和比较氧化铝陶瓷和高分子聚乙烯磨损颗粒在动物体内诱导型一氧化氮合酶(iNOS)和过氧亚硝基阴离子(ONOO-)表达的变化,探讨其在人工假体无菌性松动病理过程的意义。

Object To observe the biological response to the wear debris from the total hip prosthesis of Magnesium Silicon Jade (MSJ) in vivo, to compare the capability of inducing osteolysis between the particles of MSJ and the particles of ultra-high molecular weight polyethylene (UHMWPE), and to explore the reasons of loosening of the prosthesis of MSJ.

目的观察镁硅玉人工髋关节的磨损颗粒在动物体内的生物反应,比较镁硅玉和高分子聚乙烯微粒诱导骨溶解的活性,探讨镁硅玉人工髋关节松动的原因。

Osteolysis and loosening of artificial joints caused by polyethylene wear debris have prompted renewed interest in alternative bearing materials for hip prosthesis designs.

人工髋关节晚期失败的主要原因是高分子聚乙烯磨损颗粒引起的骨溶解导致假体松动。

Experimental study on a method of in vitro preparation and seperation for metallic prosthesis wear particles;

人工关节金属磨损颗粒体外制备分离方法的实验研究

Effects of 3 kinds of wear particles on primary cultured human osteoblasts;

3种磨损颗粒对体外原代培养人成骨细胞的作用

An in vivo study of the inhibitory effect of erythromycin on wear particles induced osteolysis;

红霉素抑制磨损颗粒诱发体内骨溶解的研究

Isolation and analysis of wear particles from severe osteolytic tissue around acetabular implant;

假体周围骨溶解组织中磨损颗粒的提取与分析

Effects of alendronate of different dose on the periprosthetical osteolysis induced by the wear particles;

不同剂量阿仑膦酸钠对磨损颗粒诱导假体周围骨溶解的影响

Objective To establish the quality control standard for Moji granules.

目的建立磨积颗粒的质量标准。

The Theoretical Analysis of Grain Movement of DIA Jet Abrasive Water Jet

前混合式磨料水射流磨料颗粒运动的理论分析

The performance of abrasive waterjet depends on the impact velocity of abrasive.

磨料水射流的性能主要取决于磨料颗粒的冲击速度。

Numerical Simulation Study of Rock Breaking Mechanism and Process Under Abrasive Water Jet

单个磨料颗粒冲击岩石过程的数值模拟研究

Three-Body Abrasive Wear Behavior of Iron Matrix Composite Reinforced with Cemented Carbide Particles

硬质合金颗粒增强铁基复合材料的三体磨料磨损性能

Friction and Wear Behavior of SiC_p Reinforced Aluminum Matrix Composites under Dry Sliding;

SiC颗粒增强铝基复合材料干摩擦磨损的研究

Preparation and Size Classification of Alumina Series Abrasive Particles for Chemical Mechanical Polishing;

氧化铝系化学机械抛光磨料的制备及颗粒分级

Study of Particle Reinforced Steel Matrix Composites with Its Wear Properties;

SHS颗粒增强钢基表面复合材料及耐磨性研究

Research on the Friction and Wear Performance of SiCp Reinforced Al-matrix-composites;

SiC颗粒增强铝基复合材料摩擦磨损性能研究

The Research of mechanism on composite material of SiC reinforcing basic steel;

SiC颗粒/钢基铸造复合材料耐磨机理的研究

Research on Wear Performance of TiC Particle Reinforced Aluminum Matrix Composites;

TiC颗粒增强铝基复合材料耐磨性能研究

Influence of Particles Size-grading on Wear Performance of SiC_P/Al Composites

颗粒级配对SiC_P/Al复合材料摩擦磨损性能的影响

Study on Prepartion and Wear Resistance of WC Particles Reinforced 45 Steel Matrix Composite

WC颗粒增强钢基复合材料的制备及耐磨性研究

Loosening of joint prostheses and prosthesis wear particles

关节假体置入后松动与假体材料磨损颗粒

Fabrication of TiC Particles Dispersion-reinforced Aluminum Matrix Composite by In-situ Synthesis Technique

原位合成TiC颗粒弥散强化2A50铝基耐磨材料

The investigation of surface quality and grinding forces of grinding processing of particle reinforced matrix aluminium composites

颗粒增强铝基复合材料磨削加工表面质量与磨削力研究

Wheel wear and ground quality when grinding SiC reinforced aluminum matrix composite with electroplated diamond wheel

SiC颗粒增强铝基复合材料磨削中砂轮磨损与加工质量研究

"Unlike dyes, pigments do not dissolve; they are applied as fine solid particles mixed with a liquid."

与染料不同,颜料不能溶解,而是以磨细的固体颗粒形式使用。

coated abrasives-grain sizes

磨具涂覆用磨料粒度