基本释义:

热流道板

网络释义

1)hot runner plate,热流道板

2)manifold block hot-runner manifold,热流道板(柱)

3)wide-runner plate heat exchanger,宽流道板式换热器

4)runner plate,流道板

5)runner ejection plate,流道推板

6)runner stripper plate,推流道板

用法和例句

Design of hot runner plate in injection mould;

热流道注射模热流道板的设计

Application of wide-runner plate heat exchanger in seed decomposition process for alumina production;

宽流道板式换热器在氧化铝生产种子分解过程中的应用

Planning of runner plate for hot runner injection mould;

热流道注射模流道板设计

The structure,the method of heating and the characteristics of runner plate and nozzles were introduced.

阐述了内热式热流道系统的工作原理及特点,介绍了内热式流道板和喷嘴的结构、加热方式及特点,探讨了内热式热流道系统的应用和发展前景。

The technology status,technical difficulties and the solutions often used at present of the nozzle,runner plate and temperature control system in the hot runner system were elaborated.

讨论了注塑模热流道技术的最新进展及应用情况,阐述了热流道系统中喷嘴、流道板和温度控制系统的技术现状、技术难点及其目前常用的解决方法,并展望了热流道技术的发展趋势。

A runner ejection plate reciprocating according to the time needed for different moulds had been added to the inner side of the fixed half base of the injection machine.

在注塑机已有定模板的内侧增加1块能够按不同模具所需时间进行往复运动的流道推板,使与之配套的各类注射模可省去流道推板、拉杆或拉板、先开模弹簧等零件 ,可以使点浇口进料的模具不再用人工取出流道凝料 ,在不使用机械手的情况下实现全自动化注射 ,提高了生产效

Thermal balance and finite element analysis of temperature field for hot runner plate

热流道板的热平衡及温度场的有限元分析

Their preform moulds could be 2-cavity based and use a hot plate or hot runner design.

模具有用两腔的，采用热板/热流道设计。

The Experiment Study of Heat Transfer Enhancement and Flow Resistance about Hole s Baffle;

设置开孔折流板通道内的换热及流动特性研究

Heat transfer and flow resistance in back and forth flow path of plate-fin

板翅往复流道间的传热与流阻性能研究

Heat transfer in rectangular pin-finned channel with perforated plate

带射流孔板矩形扰流柱通道内的壁面换热

An analysis for flow and heat transfer between two parallel plates microchannel with one wall heated in slip flow regime

滑移流区平行平板微通道内单侧加热流动与换热

Multi-cavity preform moulds do not use the cold runner design. An often-used design for the runners is hot plate design.

多腔的瓶坯模具都不采用冷流道的。较简单的流道是热板设计。

Design of Injection Mould with Wedge-shaped Plate Typing and Hot Runner System for Mineral Water Bottle Parison

楔形导板分型矿泉水瓶坯热流道注塑模设计

THE NUMERICAL SIMULATION OF FLOW AND HEAT TRANSFER IN ROUGH FLAT MICRO-CHANNELS

粗糙平板微通道流动和传热的数值模拟

Analysis of Air Channel Blockage in the High-pressure Plate-fin Heat Exchanger for Internal-compression Air Separation Unit

内压缩流程空分设备高压板翅式换热器空气通道堵塞的分析

Experimental Research on Boiling Heat Transfer Characteristics of Nanofluids in Miniture Flat Heat Pipe Evaporator with Micro-Grooved Surface;

小型重力型微槽道平板热管蒸发器内纳米流体沸腾换热特性的实验研究

heating by means of wall or floor or baseboard or ceiling panels containing electric conductors or heating pipes.

通过含有电力供热体或加热管道的墙壁、地板、护壁板或天花板供热。

Performance Evaluation of Total Entropy Increase Flower Baffle Heat Exchanger and Single Segmental Baffle Heat Exchanger

花板换热器及折流板换热器总熵增率性能评价

FLOW AND HEAT TRANSFER CHARACTERISTICS OF FLAT PULSATING HEAT PIPE

平板脉动热管的流动和传热特性研究

Microfluidic Flow and Heat Transfer in Microchannel Heat Sinks;

微管道换热器内微流体的流动与换热

CALCULATION OF HEAT TRANSFER AND FLOW RESISTANCE OF SPIRAL PLATE HEAT EXCHANGERFOR GAS-LIQUID

螺旋板式换热器气－液换热时流阻及传热计算

Numerical Analysis of the Heat Transfer Character of Cold Plate of Two-phase with High Heat Flux;

高热流密度相变均热板传热特性的理论研究

Regulation Mode of Variable Flow Heat-supply System in Substation Using Plate Heat Exchangers

板式换热器热力站变流量供热系统调节方式