基本释义:

深成形

网络释义

1)Deep forming,深成形

2)drawing forming,拉深成形

3)deep drawing,拉深成形

4)drawing deformation,拉深成形

5)Forming depth,成形深度

6)drawing process,拉深成形

用法和例句

Depending on the sheet metal forming properties experiment testing system, the relationships between friction and lubricant of automobile plate drawing forming were studied using a physical simulation.

借助板料拉深成形性能实验测试系统 ,应用物理模拟的方法研究了覆盖件拉深成形过程中摩擦与润滑的关系 ,并通过自行配置的油基润滑剂和水基润滑基研究了汽车覆盖件拉深成形过程中压边力与不同润滑状态的关系 。

The study of load curve of critical wrinkless variable blank holder force in the process of deep drawing cylinder parts;

圆筒件拉深成形临界防皱变压边力加载曲线研究

Technology and die design for the deep drawing of the reflector of light vehicle headlamp reflector;

轻型车前照灯反光镜拉深成形工艺及模具设计

Analysis of nonaxisymmetric phenomenon of titanium alloy cupulated specimen in deep drawing process;

钛合金杯形件拉深成形非轴对称现象的分析

The explicit dynamic code DYNA3D was used to simulate the drawing process of cross member part.

对汽车底盘横梁拉深成形过程进行了数值模拟,对比分析了数值模拟结果与实验结果,同时讨论了凸模的虚拟冲压速度对数值模拟结果的影响。

In addition to the high cost and long period, the traditional design process of the drawing process depends on too much empirical formulas and data.

以圆筒件的拉深为例,通过CAE模拟分析,将原需要4次拉深成形的圆筒件,改进设计为3次拉深,降低了成本,提高了生产效率。

Numerical simulation of drawing process for automobile front wheel panel was studied by using the software Dynaform for three-dimensional sheet metal forming analysis.

采用板料成形三维有限元分析软件Dynaform对某车型前轮罩板的拉深成形过程进行了数值模拟。

The Research on the Drawing of FVS0812 Hemisphere-shaped Workpiece;

FVS0812薄板半球形零件拉深成形研究

Research and Application of Reduce the Hole in Drawing;

拉深成形中变形减轻孔的研究与应用

Elastoplastic inflection study on the deep drawing figuration of spherical shaped parts

球面形零件拉深成形弹塑性屈曲研究

Micro Drawing of 3003 Aluminum Alloy Cup;

3003铝合金微圆筒拉深成形研究

Numerical Simulation of Multi-stage Forming Process of Motor Shell;

马达壳多道次拉深成形过程数值模拟

Research on the Number Simulation of the Forming Process of the Motorcar s Chassis Beam;

汽车底盘横梁拉深成形数值仿真研究

Hot Drawing Forming and Simulation of AZ31B Magnesium Alloy Sheet;

AZ31B镁合金板材热拉深成形及数值模拟

Analysis and optimization of drawing process for interior car door panel

汽车门内板拉深成形工艺分析与优化

A New Process of Hydro-mechanical Deep Drawing for Magnesium Alloy Sheets at Gradient Temperature

镁合金板材液压梯温拉深成形新工艺

Draw forming simulation and die-structure optimization of front fender

翼子板拉深成形模拟及模具结构优化

To form a deep ditch or channel.

形成冲沟形成深深的沟壑或沟渠

IDDRG (International Deep-Drawing Research Group)

国际深冲压成形研究组

Numerical simulation of cup drawing based on drawing-hole forming technology

基于拉深孔成形技术的杯形件拉深数值模拟

Forming Technology Study of Long Conical Deep-hole Components Made of 30CrMnSiNi2A

30CrMnSiNi2A长锥形深孔件成形技术研究

Research on blank shape and drawing process of asymmetric box part

非对称盒形工件拉深毛坯与成形设计

The moonlight made deep black shadows in the shrunken cheeks.

月光照在凹下去的脸颊上，形成深深的黑影。

It will create a huge, deep-water lake,

增加的水将会形成一个巨大的深水湖。

Deep grooves channelled the soft rock.

在软岩石上形成许多深槽.