基本释义:

熔解粘度

网络释义

1)melt viscosity,熔解粘度

2)melt viscometer,熔解粘度计

3)melt viscosity,熔融粘度

4)Melt viscosity,熔体粘度

5)Melting temperature,熔解温度

6)melt viscometer,熔体粘度计

用法和例句

Effect of melt viscosity on phase transition in PP/EHDPET blends;

PP/EHDPET共混体系熔体粘度对相转变的影响

Afer dealed with the comPosite of silance and titanate coupling, agent, french chalk eded with polypropylene, the fluidness of polypropylene is improved, the melt viscosity decreased evidently.

用硅烷偶联剂与钛酸酯偶联剂复配处理后的滑石粉，与ＰＰ 共混后能改善ＰＰ的流动性，降低其熔体粘度。

It is also found that the methods of increasing extruder′s temperature and decreasing the melt viscosity can correspondly enhance the quench air veloc.

结果表明 ,粘度是影响生产稳定运行的关键指标之一 ,提高螺杆温度 ,降低熔体粘度 ,相应提高环吹风速 ,强化不对称冷却吹风效果 ,可以提高产品质量和成品结晶度。

Based on Lindemann s law and the Debye model,the pressure dependence of melting temperature of rare gas solids have been argued recently.

利用Lindemann定律和Debye模型,在假设第二Grüneisen系数为体积函数的基础上,提出了一种计算惰性气体熔解温度随压强变化的、与实际情况更接近的新方法,结果与实验相符。

In the present work,nine topological parameters for 127 proteins with 3D structures and melting temperatures(Tm),collected from databases and the literature,were calculated.

搜集来自数据库和文献的127个已测定熔解温度和PDB结构的热稳定蛋白,计算了每个蛋白PDB结构的9种拓扑参数,并对各个参数与其自身熔解温度做了线性相关性分析。

To illustrate the effect of variable feed rate, the pressure and power draw changes with fluctuations in feed rate are calculated on the table below.

瞬间的压力变化及峰值出现是由熔融粘度瞬间变化导致的。

For example, a variation of20% in the feed rate causes a9% increase or decrease in pressure, which is a variability range of18%.

温度恒定时，熔融粘度变化通常是由于投料速率变化和/或混和不均导致的。

Preparation of Nylon 6 with High Viscosity by Chain-extension during Melting Extrusion

熔融挤出扩链反应制备高粘度尼龙6

Experimental Study of the Effect of Coal Blending on Ash Fusibility and Slag Viscosity

配煤对煤灰熔融特性和灰渣粘度影响的实验研究

The addition of a plasticizer may lower the melt viscosity, elastic modulus, and glass transition temperature (Tg) of a plastic.

同时,加入增塑剂,还可以降低塑料在熔融态时的粘度、弹性模数及玻璃转变温度(tg)。

The melting sticking occurred when the melting point of materials is lower than the drying temperature.

物料熔点低于干燥温度时容易产生热熔性粘壁。

Study on Improving the Fusibility of Shenhua-coal-ash;

提高神华煤灰熔融温度和熔融性的研究

The Experiment and Theoretics Study of Viscosity of Cu-Sn Alloys;

Cu-Sn合金熔体粘度的实验与理论研究

Study on Viscosity in Silicate Melts;

硅酸盐熔体粘度理论计算模式的研究

Apparent Viscosity of TiB_2 Particle Reinforced Aluminum Matrix Composites Melt

TiB_2/Al复合材料熔体的表观粘度

Effect of Fusing Agent on Ash Fusion Characteristic and Slag Viscosity of Huainan Coal;

助熔剂对淮南矿区煤灰熔融特性及粘温特性的影响

An Approach to the Problems of Clay-fused Quartz Sagger

有关“粘土-熔融石英”匣钵几个问题的探讨

Cooling the melt( in a quiescent state) to achieve the desired solid fraction.

冷却熔融金属（态下）得理想的固态粒度。

Among the properties which do not show a leveling-off are the viscosities of solutions and melts.

溶液和熔体的粘度等性能曲线并不呈现平坦。

Study on Strength Properties of Phosphate Bonded Core Used in Investment Cast and Formed by Pouring

熔模铸造用浇注成形磷酸盐粘结型芯强度研究

Effect of Effective Concentration of High Melting Point Phases in RH Refining on Slag Sticking

RH精炼渣高熔点相作用浓度对粘渣的影响

Study on the Viscosity Control of Foam Aluminum Melt and the Bubble's Stability

泡沫铝熔体粘度的控制与气泡稳定性研究

An iron rod on which molten glass is handled when being shaped and worked.

顶底杆用于粘住已熔融的玻璃以进行定型和加工的铁棒