基本释义:

熔铸法

网络释义

1)melting-casting,熔铸法

2)melting casting,熔铸法

3)melting and casting,熔铸法

4)Melting and Casting Method,熔铸方法

5)infiltration-diffusion method,熔铸-扩散法

6)hot vacuum casting,高温熔铸法

用法和例句

Fabrication and microstructure of TiC/Ti - xY composites by melting-casting;

TiC/Ti-xY基复合材料的熔铸法制备及微观组织

The CuCrZr matrix composite reinforced by VC ceramic particle was fabricated by melting-casting, and the influences of the heat treatment parameters on microstructure and properties of the material were discussed.

用熔铸法制备了VC颗粒增强CuCrZr基复合材料,并探讨了热处理工艺对材料组织和性能的影响。

The Fe-matrix composites reinforced with Al_2O_3were fabricated by melting-casting.

采用熔铸法成功的制备成了Al2O3/Fe复合材料,利用扫描电子显微镜(SEM),来观察增强相Al2O3的微观组织。

In situ titanium alloy matrix composites were fabricated by melting casting.

用熔铸法制备了原位自生钛合金基复合材料。

Ti-11Al matrix composites were fabricated by using melting casting method.

采用熔铸法制备了碳化物颗粒增强Ti-11Al基复合材料,碳化物为原位自生,在基体中均匀分布。

The in situ Al_2O_3-TiC_P/Al composites were successfully fabricated by melting and casting technique in Al-TiO_2-C system.

利用Al-TiO2-C体系熔铸法制备原位自生Al2O3-TiCP/Al基复合材料。

, the thermodynamics and kinetics of a serial of synthetical reactions in Al-TiO_2-C system were analyzed, and the kinetic model for reactive mechanisms of the in situ Al_2O_3-TiCp/Al composites made through melting and casting technique, and the fabrication processes of the composites were formulated.

借助差示扫描量热仪(DSC)、扫描电子显微镜(SEM)、能谱分析仪(EDAX)、X射线衍射仪(XRD)等测试技术,对Al-TiO_2-C体系的热力学、动力学进行了详尽的分析,建立了熔铸法(MC)制备原位自生Al_2O_3-TiCp/Al基复合材料的动力学模型,并制定了MC合成原位自生Al_2O_3-TiCp/Al基复合材料的合理工艺,同时以稀土CeO_2作为添加剂,研究稀土CeO_2对复合材料中增强相颗粒的形貌、生成量、复合材料的微观组织结构等的影响。

W-Cu/brass functionally graded material(FGM) was fabricated by infiltration-diffusion method.

对用熔铸-扩散法制备的黄铜/钨铜功能梯度材料进行了研究,对界面区域的元素成分分布和微观组织结构进行了分析,对界面区域的电导率、结合强度及抗脉冲大电流损伤性能进行了测试。

Study on Fabrication Al_2O_3/Cu Composites by Casting Process;

熔铸法制备Al_2O_3/Cu复合材料的研究

The Thermodynamics and Kinetics Analysis of in Situ Al_2O_3-TiC_p/Al Composites Fabricated by Melting and Casting;

熔铸法原位自生Al_2O_3-TiC_p/Al基复合材料的热力学及动力学分析

Deformation Behavior of In-Situ Al_2O_3-TiC/ZL109 Composite Fabricated by Melting Cast Method during Compression at Elevated Temperature

熔铸法原位自生Al_2O_3-TiC/ZL109复合材料高温压缩变形行为研究

Mould Temperature Distribution in Manufacturing Single-crystal Copper by Zone Melting Heated Mould Continuous Casting

区熔连铸法制备单晶铜的铸型温度场分布

Chemical analysis methods for fuse cast alumina refractories

GB/T14351-1993熔铸氧化铝耐火材料化学分析方法

Casting of Post Core Investment by Indirect Method and Its Application

间接法制作铸造桩核熔模及其临床应用

Investigation on Brass/W-Cu Alloy Functionally Graded Material(FGM) by Infiltration-Diffusion Method

熔铸-扩散法制备黄铜/钨铜功能梯度材料的研究

An Invastigation on Producing Oxidized Fusion Cast 33~# AZS Blocks

氧化法熔铸33~#锆刚玉制品生产工艺研究

To make(objects)by pouring molten material into a mold.

铸造将（熔化物）注入铸模，得到铸件

Comparison of fluor-mica glass-ceramics made by melt-casting and sintering methods

熔融铸造法及烧结法氟云母玻璃陶瓷性能的比较

The statue was melted into a cannon.

铸像被熔成为一尊大炮。

The lead was melted down and poured into moulds.

铅被熔化后倒入了铸模。

Principles of Cast Alloy & Melting

铸造合金原理及熔炼

Application of Iterative Parallel Dynamic Programming Algorithm in Cost Optimizing Control of Cast Steel Melting Process

迭代并行动态规划算法在铸钢熔炼成本优化控制方面的应用

The Structure and Its Characteristics Analysis of Aluminum Foam Ingot Fabricated by Molten Frothing Process Using SiC Particles Adhered Melt

SiC颗粒自增粘熔体发泡法制备泡沫铝铸锭的组织及其特征分析

any low-fusing alloy used in cheoplasty (molding artificial teeth).

低熔点合金，用于低熔铸型（假牙成型）。

The cast iron was melted and poured into sand moulds.

铸铁熔化之后，就倒进铸模里。

Melting and Casting Process Investigations on Large Size Ingot of AA5182 Al-Mg Alloy;

AA5182大型Al-Mg合金铸锭熔铸过程研究