基本释义:

热嘴冷流道

网络释义

1)hot sprue/cold runner,热嘴冷流道

2)Hot Runner Mold Nozzle,热流道模具喷嘴

3)cold/hot aisle,冷、热气流通道

4)heat/Cold channel,热/冷通道

5)cooling jet oil flow,冷却喷嘴油流

6)cold runner,冷流道

用法和例句

A technological process for plastic shells,injection and compression forming process with cold runner is introduced in this paper.

阐述了一种热固性塑料壳体的成型工艺,即塑料冷流道注射、压缩复合成型工艺,并设计了实现该成型工艺的模具,采用该工艺可以降低纤维取向、去除毛边和流道料损失费用。

Multi-cavity preform moulds do not use the cold runner design. An often-used design for the runners is hot plate design.

多腔的瓶坯模具都不采用冷流道的。较简单的流道是热板设计。

NUMERICAL MODEL FOR THE SUB-COOLING MICROCHANNEL PARALLEL FLOW CONDENSER

过冷式微通道平行流冷凝器数值模型

EFFECT OF CONJUGATE HEAT TRANSFER AND INTERNAL COOLANT FLOW ON FILM COOLING

耦合传热和冷却流通道流动对气膜冷却的影响

The Study on Natural Convective Subcooled Boiling Heat Transfer in Vertical Narrow Annulars;

竖直窄环隙流道自然对流过冷沸腾换热研究

Model for single bubble growth of subcooled flow boiling in vertical narrow rectangular channel

竖直窄流道内过冷流动沸腾的单汽泡生长模型

A study on the flowpath and the aerodynamic characteristic of a hypersonic vehicle

某高超飞行器流道冷流特征及气动力特性研究

Separate bolted on cooling jackets or externally mounted cooling fluid piping are specifically prohibited.

禁止安装采用螺栓固定的冷却罩,或在外部安装冷却流体管道。

With cooling water flowing through the internal pipes, much of the heat in the condensing unit is carried away.

当冷却水流经内部管道时，冷凝器中的许多热量被带走。

Numerical analysis on turbulent flow and heat transfer in helix-alike internal cooling passage

仿螺旋肋片内冷通道流动与传热数值分析

Mixed acid should be allowed to flow for 1 minute in order to flush the pipesand cooling system.

应让混酸流一分钟，以便冲洗管道和冷却系统。

Study on Turbulent Flow and Heat Transfer in Internal Cooling Passage with Helix-alike Fins;

仿螺旋肋片内冷通道流动与换热特性研究

Analysis of Boiler Air Channel s Flow Field and Study on Measures of Reducing Vibration and Energy Conservation;

锅炉冷风道的流场分析与减振节能措施研究

Thermal analysis for injection mold with conformal cooling channels based on ANSYS

基于ANSYS软件的注塑模随形冷却流道的热分析

Study on the heat transfer characteristics for the nanofluid-based microchannel cooler

采用纳米流体的微通道冷却器散热特性研究

Analysis of the Air Motion Flow Field in the Air Duct of an Air-cooled Steam Turbine Generator Rotor

空冷汽轮发电机转子风道中气体运动流场分析

Heat transfer enhancement within an internal passage by combinations of ribs and suction holes

内冷通道带肋和出流孔壁面的换热研究

SIMULATION ON AIRFLOW CHARACTERISTIC IN SPLAT COOLING SECTION OF ROLLER HEARTH KILN

建陶辊道窑急冷段内气体流动特征模拟研究

Application of Freezing Method to Outflow Rerouting Tunnel Construction Project in Xingyun Lake

冷冻法在星云湖出流改道隧洞工程中的应用