基本释义:

渗碳焰

网络释义

1)carburizing flame,渗碳焰

2)carburizing flame,渗碳火焰

3)acetylene flame carburizing,乙炔焰渗碳

4)carburizing

['kɑ:bjuraizi?],渗碳

5)carburization

[,kɑ:bjurai'zei??n],渗碳

6)Carbonization,渗碳

用法和例句

Defects and hardness index of carburizing process;

渗碳工艺缺陷与硬度指标

Effects of carburizing time on microstructure and transverse rupture strength of graded cemented carbides;

渗碳时间对梯度硬质合金显微组织和抗弯强度的影响

Carburizing Processes by Computer Aided Design;

计算机辅助设计气体渗碳工艺

Defective Carburization of Diesel Engine Components and its Countermeasure and its Countermeasure;

柴油机零件气体渗碳缺陷分析及对策

The study on carburization of molten iron of bf at dropping process;

高炉铁水滴落过程的渗碳研究

Improvement of 20CrNi2Mo Gear Carbonization Process;

20CrNi2Mo材料齿轮渗碳工艺改进

The carbonization have a important function in the mechanical industry.

渗碳工艺在机械行业中扮演着重要角色。

The two pure Fe samples whose surface layers are decarbonization are gotten with the furnace cooling by putting steel Q235 into resistance furnace and heating to 1253K for 40 min.

将其中试样A通过氧化-还原处理,表面具有层状结构,与另一脱碳试样B一起放入改造后的电阻炉内在通氢气的气氛中进行渗碳淬火。

liquid carbonitriding

液体碳氮共渗, 液体渗碳氮化法

Model for the distribution of carburized case depth of spur gear in warm forming after car burizing

直齿轮“渗碳-温挤”渗碳层厚度分布模型

continuous bright carburizing quenching furnace

连续式光辉渗碳淬火炉

case hardening grade alloy gear steel

渗碳(皮硬)级合金齿轮钢

Study on the hydrogen embrittlement phenomena of carbonitriding tape gear;

合金渗碳钢锥齿轮碳氮共渗的氢脆现象研究

INVESTIGATION OF THE ACCURATE CONTROL ABOUTSURFACE CARBON CONCENTRATION OF CARBURISING PART

渗碳零件表面碳浓度精确控制的探讨

Sim? ilarly, an increase in case depth, particularly uneven case depth in case hardening steels, increases warpage on quenching.

与此类似，渗碳层厚度越大，特别是对于渗碳层厚度不一的渗碳用钢，淬火时更易产生翘曲。

Study on the High Temperature Oxidation Resistance and Carbonization Resistance of Diffusion Aluminized Stainless Steel;

扩散渗铝不锈钢的抗高温氧化和抗渗碳性研究

Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material

GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定

Research Hydrogen-free Carbonizing and Hydrogen-free Carbonitriding on Titanium and Titanium Alloy Ti6A14V by Double Glow Plasma Discharge;

钛及钛合金Ti6A14V双层辉光离子无氢渗碳及无氢碳氮共渗的研究

Study on Optimizing the Tecnics of the Super Saturation Carburization on 20Cr Steel and a New Stype Super Saturation Carberization Steel;

20Cr钢超饱和渗碳工艺优化及一种新型超饱和渗碳钢的研究

The development of Numerical Simulation System of Carbon Concentration Distribution in Carburized Layer of the Usual Carburized Materials

常用合金渗碳材料碳分布数值模拟系统开发

Specification for carburizing steels of bearings

GB/T3203-1982渗碳轴承钢技术条件

The case-hardening or carburizing process is in wide use.

表面淬火或渗碳法应用十分广泛。

Simulation Study on Fluidized Bed Carburizing Layer Depth Mathematic Model

流态化渗碳层深度数学模型仿真研究

Study of Carbusintering Process of Fe-Ni Alloy Powder Materials;

Fe-Ni合金粉末材料渗碳烧结的研究

Gas Nitrocarburzing for 4Cr5MoSiV1 Steel

4Cr5MoSiV1(H13)钢的气体氮碳共渗

Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating

碳氮共渗-深层稀土硼碳氮共渗复合处理