基本释义:

逃料倾斜角

网络释义

1)draght angle,逃料倾斜角

2)acclivitous angle of bed level,料面倾斜角

3)obliquity,倾斜;倾角

4)tilt,倾角,倾斜

5)slant angle,倾斜角,倾斜

6)inclination,倾角;斜角

用法和例句

Distribution of bed level in horizontal stirred bed reactor(HSBR) for polymerization of propylene was studied by using acoustic emission measurement to determine the acclivitous angle of bed level in the reactor.

采用声发射检测技术测量聚丙烯卧式搅拌床反应器的料位分布,从而确定其料面倾斜角。

Determination of Acclivitous Angle of Bed Level in Horizontal Stirred Bed Reactor for Polypropylene by Acoustic Emission Measurement

聚丙烯卧式搅拌床反应器料面倾斜角的声发射检测

The plane dips to the south with a dip angle of fifty-five degrees.

倾斜断面倾向南，倾角55度。

The main effect affected by material feature is lateral displacement, then the loading height and slant angle.

横向位移受物料形态影响最大 ,其次是装料高度和斜面倾角

tilting position

倾斜角(转炉)，倾斜位置

The angle of inclination from the vertical of a vein, fault, or lode.

倾斜余角因矿脉，断层或矿井倾斜而与垂直面形成的角度

Technology of Light-support Caving Mining with Large Angle

轻放工作面大倾角仰斜开采工艺技术

Having a horizontal surface without a slope, tilt, or curvature.

水平的具有无倾斜度、倾斜角或弯曲的水平平面的

The mixing barrel can be tilted freely at the angle of degrees for discharging and cleaning purpose.

混和桶可任意倾斜角度，便于出料及清洁之需要。

having the slant of a bevel.

具有斜面的倾斜特点。

Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.

斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。

Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.

文摘:斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。

CALCULATION OF THE DIRECTION AND DIP ANGLE OF THE MAIN TILT IN LIMITED AREA OF THE CRUST BY MEANS OF THE LEVELLING DATA

利用水准测量资料计算局部地区地壳的主倾斜方向和倾角

All planar structures are represented by a strike line and dip angle.

一切面状构造均可用向线和倾斜角来表示。

The influence of different angles of the occlusal plane on the supporting tissues of edentulous jaws

全口义齿?平面倾斜角度对支持组织受力的影响

heeling error

【航海】倾斜自差, 倾斜飞行;(铣头的)偏转角

A slanted or oblique surface.

斜面一个倾的或倾斜的平面

To draw the spring-leaf retainer can use the similar method with the wedge which has a smaller obliquity.

对于弹簧的支撑圈,方法类似,只是楔形体的斜面倾斜角度要小一些。

The angle or inclination of a line or surface that meets another at any angle but90=.

斜角，斜面一直线或平面与另一（直线或平面）相交所成的除90°外的任意角或倾角