基本释义:

退火状态

网络释义

1)anneal state,退火状态

2)anneal,退火

3)annealing,退火

4)annealed,退火

5)annealing treatment,退火

6)thermal annealing,退火

用法和例句

Improving contact of CNT-metal by annealing;

利用退火的碳纳米管与金属接触特性的改善

Study on optimal current density to annealing Fe-based amorphous wire by pulse current;

铁基纳米非晶丝脉冲电流退火的最佳电流密度研究

Measures of Improving Qualification Rate of Intermediate Annealed Air-Conditioner Pipe of 1050A Aluminum Alloy;

提高1050A铝合金空调管中间退火合格率的措施

Influence of annealing condition on the stress impedance of Fe-based amorphous alloy ribbons;

退火条件对铁基非晶薄带压应力阻抗效应的影响

Influence of annealing in different air atmosphere on optical properties of CdWO_4;

退火对钨酸镉晶体光谱性能影响的研究

Effect of annealing on magnetic properties of Fe-based glassy alloy;

铁基金属玻璃区间退火对磁性能影响的研究

The film was annealed at 550℃,900℃ and 1100℃.

对550℃沉积态薄膜在900℃、1100℃时进行高温退火处理,硅衍射峰明显加强。

Effects of annealing treatment on the rare earth-based low-Co hydrogen storage alloy;

退火对稀土系AB_5低钴贮氢合金的影响

Effects of annealing treatment on low-Co hydrogen storage alloy;

退火对低钴贮氢合金的影响

Annealing treatment improves the crystallinity of electrodeposited films and the effective grain size increases,resulting .

5,并对沉积薄膜400℃左右Ar气氛中退火20min。

The effect of the thermal annealing temperature on the electrical and optical properties of Mg-doped InGaN/GaN heterostructures in O 2 ambient was systematically investigated.

系统地研究了氧气氛围中退火温度对Mg掺杂InGaN/GaN异质结电学特性及光学性能的影响。

The InP material surface is degenerated after ion implantation,and is repaired after thermal annealing above 300℃.

当离子注入后InP表面电学特性退化,在300℃以上退火后,材料表面回复较好,H+离子注入区电阻率约为InP体材料的104倍。

By X-ray diffraction(XRD) and scanning electron microscope (SEM) , the influences of substrate temperature, the ratio of Ar to O_2 and thermal annealing temperature on ZnO crystal qualit.

本实验用XRD和SEM研究了工艺条件如基片温度、氩氧比及退火工艺对ZnO薄膜结构特性的影响。