基本释义:

匣盒间转运处理

网络释义

1)cassette-to-cassette handling,匣盒间转运处理

2)casing treatment,机匣处理

3)casing treatment,处理机匣

4)circumferential groove casing treatment,周向槽处理机匣

5)unsteady casing treatment,非定常机匣处理

6)Circumferential grooves casing treatment,周向槽机匣处理

用法和例句

Unsteady numerical analysis for casing treatment;

机匣处理的非定常数值分析

CFD study on casing treatment in a transonic compressor;

跨声速压气机机匣处理的数值研究

Numerical analysis of two circumferential groove casing treatments about a centrifugal compressor

离心压气机周向槽机匣处理方案的对比分析

Plenum chamber casing treatment——numerical research of internal flow and mechanism of stall margin improvements;

驻室式处理机匣——内部流动及扩稳机理的数值研究

3D numerical analysis for the effect between tip clearance and casing treatment in turbomachinery;

压气机间隙流与处理机匣作用的三维数值分析

Design of a slot-type casing treatment and its experimental validation;

一种槽道式处理机匣设计及实验验证

A circumferential groove casing treatment was designed,the effects of circumferential casing treatment on the performance and flow field of a transonic axial flow compressor rotor was numerically investigated by performing a 3-D steady-state Navier-Stokes analysis.

结果表明,数值模拟结果与实验结果符合良好,该周向槽处理机匣使压气机转子的失速点流量减小了11。

Role of tip leakage flow on flow instability and its control with circumferential groove casing treatment;

在此基础上,利用周向槽处理机匣结构对顶部间隙泄漏流进行控制,并探讨了周向槽处理机匣结构提高压气机稳定工作裕度机理。

An experimental study on inhibition of unsteady casing treatment on stall inception;

非定常机匣处理对失速先兆波的抑制作用实验研究

An experimental investigation of rotating stall margin improvement with unsteady casing treatments;

非定常机匣处理扩大压气机稳定裕度实验

In the present work,experimental investigation is conducted with emphasis on the effect of unsteady casing treatments with injection on the stall margin and efficiency of a low spee.

结果表明:非定常机匣处理能够在不同工作转速下对风扇稳定裕度有显著效果,效率没有明显改变。

The Mechanism Research of Circumferential Grooves Casing Treatment on Stability Extension of Inclined-flow Compressor

周向槽机匣处理对斜流压缩机扩稳的机理研究

Numerical analysis of two circumferential groove casing treatments about a centrifugal compressor

离心压气机周向槽机匣处理方案的对比分析

A Study of the Stability Enhancement Achieved by the Casing Treatment of an Oblique-flow Impeller Equipped with a Rear-mounted Volute Housing

带后置蜗壳的斜流叶轮机匣处理扩稳研究

Numerical Investigation and Comparison on the Stall Improvement Mechanism of Centrifugal Compressor with Inducer Casing and Bleeding

离心压气机机匣处理与导叶轮缘放气的扩稳机理分析及比较

Effects of Casing Configuration on Post-Stall Performance of Axial Flow Compressor;

新型机匣处理对轴流压气机过失速性能影响的研究

Numerical Analysis about Axial Slots Casing Treatment Extending Stall Margin of a Centrifugal Compressor

轴向槽机匣处理提高离心压气机失速裕度的数值研究

Experimental investigation about the circumferential treating angle of non-axisymmetric casing treatments

非轴对称处理机匣的周向处理范围的实验

Influence of Stepped Tip Gap Casing on Centrifugal Compressor Performance

梯形间隙处理机匣对于离心压气机性能的影响

Effect of exciting frequency of casing treatment on transonic compressor performances

处理机匣激励频率对跨声速压气机性能的影响

Experimental investigation of a solid/arc slot asymmetrical combined casing treatment

实壁/圆弧斜槽周向不对称组合式处理机匣实验

Orthogonal experimental investigation of geometry structure of grooved casing treatment

槽式处理机匣几何结构参数的正交试验

Numerical Investigation of Casing Treatments Influence on Performance and Stability of a HPC First Stage

处理机匣对高压压气机性能和稳定性影响的数值模拟和试验研究

Development of the Automobile Black Box and the Post-analysis System for Traffic Accidents Reappearance;

汽车黑匣子及其事故再现后处理系统的开发

Theory and Experimental Study on Aeroengine Casing Containment;

航空发动机机匣包容性理论和试验研究

NONAXISYMMETRIC CASING ON AXIAL-FLOW COMPRESSORS

轴流压气机非轴对称机匣造型的研究

Gas piston rod and receiver. Note the recess on the bottom of the receiver, it is for the bolt locking.

导杆及枪匣，注意枪匣内下方的凹槽，供枪机闭锁用。

black box automatic device for recording details of the flight of a plane

黑匣子（记录飞机飞行详情的自动装置）.

Analyze the data in the Black Box (the flight recorder) of the crashed plane

分析失事飞机的黑匣子数据