基本释义:

压丹试验

网络释义

1)Dump test,压丹试验

2)Dennis-Silverman test,丹-西氏试验

3)repeating press test,压压试验

4)compression test,压缩试验

5)Hydraulic test,水压试验

6)hydrostatic test,水压试验

用法和例句

A impact tester and a repeating press tester have been used to evaluate the mechanical properties of the multilayer.

采用磁控溅射技术在TC4钛合金表面制备Cu/Ni多层膜,利用多冲和动态循环压压试验装置对膜层的力学性能进行了评价,探讨了冲击条件、多层膜调制周期及结构等对多层膜失效行为的影响,比较了多层膜和单层Cu、Ni膜在多冲条件下的失效行为,以及多冲与循环压压载荷对多层膜失效行为的影响。

A compression test and recrystallization simulation test of 41Cr4 steel(medium carbon and low alloy steel)had been performed by GLEEBLE 3500 subject to large strain and high temperature, then the volume fraction of recrystallization and true-stress and true -strain was obtained.

8)条件下,在Gleeble-3500试验机上进行了41Cr4钢的压缩试验和再结晶模拟试验,测得了再结晶体积百分数及真应力和真应变。

In order to establish accurate constitutive equations for hot workings of metals, a large number of constant strain-rate compression tests have been done on thermal-mechanical testing machines (Gleeble-1500 and Formaster-press) using TC11 titanium alloy as testing materials.

为了建立本构方程，必须测量一定温度、应变速率范围内的流动应力值，这通常是由压缩试验来完成的。

Practical experience of the main primary system hydraulic tests for Qinshan NPP Phase Ⅱ;

秦山第二核电厂一回路主系统水压试验实践经验

FEM calculation and hydraulic test of NF-6 wind tunnel;

NF-6风洞洞体有限元计算与水压试验

The hydraulic test unit for large-diameter gate valves;

大口径平板闸阀的水压试验装置

Differences between chinese standards and ASME code for hydrostatic test of utility boiler;

国内外电站锅炉水压试验标准的差异

Effect of hydrostatic test on material properties of air cylinder for metro vehicle

水压试验对地铁车辆储风缸材料性能的影响

Furthermore,the experimental stress analysis of the case is also accomplished using the hydrostatic test.

通过水压试验对箱体进行试验应力分析,验证了箱体有限元模型及计算的正确性,为研究箱体提供了可靠的数据和技术储备。

consolidated drained triaxial compression test

固结排水三轴压缩试验

Compressing Mechanism Design of Large Rectangular Baler and Experimental Study on Compression Research;

大方捆打捆机压缩机构设计及压缩试验研究

Calibration of axisymmetric hot compression test results and verification for Cr9Mo steel

Cr9Mo钢热压缩试验结果的标定及验证

Metallic materials--Compression testing

GB/T7314-1987金属压缩试验方法

Aluminium and aluminium alloys--Compression test method for tubes

GB/T3251-1982铝及铝合金管材压缩试验方法

testing method for compressive properties of rigid cellular plastics

硬质泡沫塑料压缩试验方法

Test method for compression of rigid cellular plastics

GB/T8813-1988硬质泡沫塑料压缩试验方法

consolidated undrained triaxial compression test

固结不排水三轴压缩试验

unconfined compression test

无侧限压缩[压力, 抗压]试验

The Experimental Study on the Effect of Compression Velocity on the Compression Process of Agricultural Fibrous Materials;

压缩速度对农业物料压缩过程影响的试验研究

testing method for low-temperature compression set of vulcanize delastomers

硫化橡胶的低温压缩永久缩小试验方法

Testing method for compressive(crushing)strength of high performance ceramics

GB/T8489-1987工程陶瓷压缩强度试验方法

Test method for crushing strength of porous ceramic

GB/T1964-1996多孔陶瓷压缩强度试验方法

Plastics--Determination of compressive properties

GB/T1041-1992塑料压缩性能试验方法

Test method for measuring compressive properties of mineral wool products

GB/T13480-1992矿物棉制品压缩性能试验方法

testing method for compressive creep of refractry bricks

耐火砖压缩蠕变试验方法

Test method for compressive properties of resin casting body

GB/T2569-1995树脂浇铸体压缩性能试验方法

Compressed air dryers-Specifications and testing

GB/T10893-1989压缩空气干燥器规范与试验