基本释义:

压缩烧结

网络释义

1)compression sintering,压缩烧结

2)compressible sintered powder material,可压缩烧结材料

3)sintering shrinkage,烧结收缩

4)compression ignition,压缩燃烧

5)Pressureless Sintering,无压烧结

6)hot-press sintering,热压烧结

用法和例句

Evolvement of sintering shrinkage and chemical composition of millicron-Ti(CN) base cermets during sintering;

纳米Ti(CN)基金属陶瓷烧结收缩和化学成分的变化

Such phenomenon indicates that ZrO_2 has a baffling effect on sintering shrinkage ratio of glass particle.

随着ZrO2 加入量的增加,玻璃颗粒的烧结收缩率下降,说明ZrO_2 的加入对玻璃颗粒的烧结收缩有一定的阻碍作用。

Preparation process of ZrB_2/B_4C ceramic composites by pressureless sintering based on mechanical mixing;

基于机械混合法无压烧结制备ZrB_2/B_4C陶瓷复合材料

Research on pressureless sintering of hexagonal boron nitride;

六方氮化硼无压烧结研究

Discussion on pressureless sintering of SiC ceramic;

SiC陶瓷无压烧结工艺探讨

Research on hot-press sintering process of N type thermoelectric materials ZnO;

N型热电材料ZnO热压烧结工艺研究

Si_3N_4 ceramics were prepared by aligning theα-Si_3N_4 whisker in the substrate via tape casting and hot-press sintering.

利用流延成型使α-Si_3N_4晶须在基体中定向排列,并采用热压烧结技术制备了Si_3N_4陶瓷。

Ti_3Al/TiC+ZrO_2 composites were prepared by mechanical alloying and hot-press sintering.

采用机械合金化和热压烧结制备了Ti3Al/TiC+ZrO2复合材料。

The Ways of Evaluation on Plastic Deformation for Compressible Sintering Materials

可压缩烧结材料塑性变形问题的求解方法

Sintered metal materials--Determination of compression strength at room temperature

GB/T6525-1986烧结金属材料室温压缩强度的测定

Study on the Process and Deformation Behavior of Porous Aluminium by Powder Sintering;

粉末烧结多孔铝及其压缩变形行为的研究

Analysis on burnout accident of compressor motor's bearing pedestal and its experience summary

压缩机电机轴承座烧毁事故分析及经验总结

Microstructures and Compressibility of Porous Stainless Steel Prepared by Laser Sintering;

激光烧结成形多孔不锈钢的组织特征及压缩性能研究

High Temperature Compression and Oxidation Properties of Ni_3Al and Its Composites Fabricated by Spark Plasma Sintering;

放电等离子烧结Ni_3Al及其复合材料的高温压缩与抗氧化性能

Effect of porosity on compressive properties of porous sintered stainless steel fiber media

孔隙度对烧结不锈钢纤维多孔材料压缩性能的影响

ULTRA-HIGH PRESSURE SINTER NANO-SiC CERAMIC

无烧结助剂SiC陶瓷的高压烧结研究

Reaserch on QHCCI (Quasi-Homogeneous Charge Compression Ignition) Combustion System;

QHCCI（准均质充气压缩点燃）燃烧系统研究

Structural Intensity of Piston Compressor

活塞压缩机结构强度

consolidated drained triaxial compression test

固结排水三轴压缩试验

The Influences of Different Additives on Pressureless Sintering of Si_3N_4 Ceramics;

不同烧结助剂对氮化硅常压烧结的影响

The Pressureless Sintering Behavior and Master Sintering Curve at Constant Heating Rate for Titania;

氧化钛恒速无压烧结行为及主烧结曲线研究

Properties of Incompressible Boundary Incompressible Surfaces in Knot Complements;

纽结补中的不可压缩边界不可压缩曲面的性质

The Development of Rapid Compression Machine and Its Application in Homogeneous Charge Compression Lgnition;

快速压缩机的开发及其在HCCI燃烧研究中的应用

Experimental Study on Iso-octane HCCI Combustion Characteristics by the Use of a Rapid Compression Machine;

利用快速压缩机对异辛烷HCCI燃烧特性的研究

The Research of Combustion Process on a Compression Ignition CNG Engine;

压缩着火天然气发动机燃烧过程的研究

CAUSE ANALYSIS OF THE BURNOUT OF SUCTION VALVES OF RECYCLE HYDROGEN COMPRESSORS IN DIESEL HYDROGENATION UNIT AND THE COUNTERMEASURES

柴油加氢压缩机气阀烧损原因分析及解决措施