基本释义:

旋压成形机

网络释义

1)spin forming machine,旋压成形机

2)spinning,旋压成形

3)spinning forming,旋压成形

4)spin forming wheel,旋压成形轮

5)final spinning block,旋压成形模

6)metal spinning technology,旋压成形技术

用法和例句

Spinning Technology Based on Principle of Continuous Multipoint Forming

基于连续多点成形原理的旋压成形技术

A simple and economic spinning process for specially shaped tantalum alloy products is developed.

研究了一种简单、经济的旋压成形钽合金异形件的方法,并讨论了旋压用板坯的壁厚均匀性、纵进速度、减薄率及压窝尾顶块内弧半径等对旋压成形的影响,同时也提出了相应的解决措施。

In contrast, the spinning techniques which is introduced in this paper is more fit to make it, it can obviously improve the product quality and efficiency.

文中介绍的波形炉胆旋压成形工艺却非常适合生产波形炉胆 ,可以明显提高产品质量和生产效率。

The spinning forming law of this sort of non-axisymmetic parts is discussed.

采用多道次有芯复合旋压工艺,成功地加工出了30CrMnSiA薄壁偏心异形件,并探讨了这种非对称工件旋压成形的规律。

The spinning forming is to clamp blanks onto mould core,using spinning press to have mould core spin as high speed together with blanks.

旋压成形是将毛坯夹紧在模芯上 ,由旋压机带动模芯和毛坯一起以高速旋转。

This article analyzes the failure reasons on fracture in early stage for spin forming wheel of Cr12MoV steel.

分析了Cr12MoV钢旋压成形轮早期断裂失效的原因。

Typical application and development of metal spinning technology and equipment;

旋压成形技术和设备的典型应用与发展

spin-forming and flow-forming machines

旋压成形机床和滚压成形机床

Research on Forming Mechanism of Multi-Pass Conventional Spinning Process and Influence of Roller-trace on the Process;

多道次普通旋压成形机理与旋轮运动轨迹作用的研究

3D FE Analysis on Deformation Mechanism and Laws of Multi-pass Spinning of Large Complex Thin-walled Shell;

大型复杂薄壁壳体多道次旋压成形机理及规律的三维有限元分析

Research on the Deformation Mechanism and Laws of Thin-walled Abnormal Shell Power Spinning Using 3D FEM;

异型薄壁壳体强力旋压成形机理及规律的三维有限元分析

Cutting and Precision Form of Helical Vane of Shearer Drum

采煤机滚筒螺旋叶片的下料及辗压成形

Spin-forming numerical simulation of cup-shaped inner meshing gear

杯形内啮合齿轮旋压成形的数值模拟

Experimental research on spin-forming of cup-shaped thin-walled trapezoidal inner-gear

杯形薄壁梯形内齿旋压成形工艺的试验研究

NUMERICAL SIMUL ATION OF THICK WALL HEAD WARM FORMED BY MOULDLESS SPINNING;

厚壁封头无胎温旋压成形的数值模拟

FE simulation on the ball spinning forming of inner grooved copper pipe

内螺纹铜管滚珠旋压成形有限元模拟

Experimental research on ball spinning of thin-walled stainless steel tube

薄壁不锈钢管滚珠旋压成形工艺研究

Spinning Technology Based on Principle of Continuous Multipoint Forming

基于连续多点成形原理的旋压成形技术

Design of Tool and Experimental Study with Respect to Ball Spinning Forming of Thin-walled Tubular Parts

薄壁筒形件滚珠旋压成形工装设计及实验研究

Study on Ball Spinning of Tubular Parts with Longitudinal Inner Rib

纵向内筋筒形件滚珠旋压成形的工艺研究

Effects of Power Spinning Processing Parameters on Cylinders of TC4 Alloy

强旋工艺参数对TC4钛合金筒形件旋压成形的影响

wheel forging press

车轮坯成形模锻压力机

powder metal press

粉末制品成形压力机

The formation mechanism and evolution of the double piral arms in vortex

涡旋中双臂形成的物理机制及其演变

Finite Element Simulation of Process for Multi-Cycle Spinning and Pulley Spinning

多道次拉旋及皮带轮旋压成形工艺的有限元模拟研究