基本释义:

折叠表面

网络释义

1)fold surface,折叠表面

2)surface laps,表面折叠;表面折痕

3)surface laps and control,表面折叠与控制

4)Fold surface free energy,折叠表面自由能

5)fold plane,折叠面

6)surface crease,表面折皱

用法和例句

The split rolling pass design and basic principle of split rolling CC slabs into blooms of 1150 mm blooming mill is introduced In addition, not only the work piece's curvature and its control, but also bloom surface laps and control are studie

介绍了采用连铸板坯经 115 0初轧机切轧成方坯的切轧工艺、孔型设计及切分的基本原理 ;对轧件的弯曲与控制 ,和钢坯表面折叠与控制 ,从理论上进行了分析研

The surface crease presenting in rolling with large percent reduction is simulated with finite element method,the law that process parameters affect rolling quality is found out.

采用有限元法对大压下量轧制工艺下,轧件表面折皱的产生进行了模拟分析,找到了工艺参数对轧件质量的影响规律,经过对原工艺参数进行调整,达到了降低钢材表面折皱缺陷的目的。

To fold the fabric on the crosswise grain, align the raw edges together, folding the fabric in half to form a cross-grain fold.

横向折叠面料,将毛边对齐,面料对折即可。

E plane (H plane) magic-T

e面(H面)折叠双t

Rough edges must lap under.

毛巾必须折叠在下面。

The fabric may be folded along the lengthwise grain or the crosswise grain, or formed into a gate fold.

面料可沿直丝绺折叠,或沿横丝绺折叠,或门式折叠。

Jack doubled his slice of bread to make a sandwich.

杰克把面包片折叠起采做成三明治。

Cylindrical Fold Study of a Large In-Space Deployable Membrane Parabolic Reflector;

薄膜抛物面反射器的圆柱式折叠研究

Nd:YVO_4 laser emitting at 1.34/μm end pumped by a diode laser with three mirror fold cavity type;

LD端面泵浦的Nd:YVO_41.34μm三镜折叠腔型激光器

folding intermediate

折叠中间体，折叠中间态

capable of collapsing or being collapsed.

能够折叠或者被折叠。

Gatefold: Also called Fold-out, Thrown-out.

对门折（折叠插页）

Either of the folded ends of a book jacket that fit inside the front and back covers.

向内折的边书籍护套折进封面或封底的折叠端的任一端

Research on the Large Rigid Folding Solar Array and the Deployment Technology

大面积刚性折叠式太阳电池阵及伸展技术

The Dynamic Response of Folding Double-Layer Cylindrical Reticulated Shell;

折叠式双层柱面网壳在地震作用下的动力响应

Research and Development of Foldable Row Feed of Planar Array Antenna (Low Sidelobe)

可折叠式平面阵低副瓣天线行馈的研制

Effect of plane angle of serpentine spring on characteristics of capacitive RF MEMS switch

折叠梁平面角对电容式RF MEMS开关性能的影响

Realization of design on parabolic shaping for planar multi-linkages pucker mechanism

平面多连杆折叠机构抛物线赋形的设计实现

concertina movement

折叠［蛇腹］式构造

automatic layboy

(桨板)自动折叠机