基本释义:

直角压陷

网络释义

1)corner shear drop,直角压陷

2)spur gear with 28 degree pressure angle,28°压力角直齿轮

3)extruder with side delivery head,直角(机头)压出机

4)hydraulic right angle injection moulder,液压直角注模机

5)Compressed mark,压陷

6)Right-angle Three-cylinder Hydraulic Platform,直角三缸液压摇摆台

用法和例句

Stress analysis for involute spur gear with 28 degree pressure angle;

渐开线28°压力角直齿轮应力分析

Under laboratorial environment , Right-angle Three- cylinder Hydraulic Platform is a empirical equipment that simulates vibration warship and movement of the warship on the water surface, it can accomplish carrier plane illuminated guidance performance test of the system.

直角三缸液压摇摆台是在实验室环境下模拟舰船在水中的摇摆和运动的一种实验设备,可以在实验室完成舰船上舰载飞机灯光导引系统的性能实验。

Stress analysis for involute spur gear with 28 degree pressure angle

渐开线28°压力角直齿轮应力分析

Stress Analysis and Tooth Profile Optimization of Asymmetric Involute Gear with Two Pressure Angles;

双压力角非对称渐开线直齿轮的应力分析及齿廓曲线的优化

The range of gears cut by the hob of small pressure angle

小压力角滚刀加工齿轮的齿数范围

Vibration Analysis of Involute Gear with Unsymmetric Teeth and Double Pressure Angles

双压力角非对称齿廓渐开线齿轮的振动分析

rack and pinion press

齿轮齿条传动压力机

Bevel gears: gears which connect two shafts at right angles.

伞齿轮:连接直角相交两轴的齿轮。

Research on the Transmission Design and Investigation on Load Capacity of Asymmetric Gear with Two Pressure Angles;

双压力角非对称齿轮啮合特性及应力分析研究

Analysis of Skewed Tooth Bevel Gear and Straight Tooth Bevel Gear

斜齿圆锥齿轮与直齿圆锥齿轮应力分析研究

The Practical Involute Equation under Cartesian Coordinates System

齿轮轮齿齿廓渐开线的实用直角坐标方程研究

straight-cut gear

直齿圆柱齿轮，正齿齿轮

Finite element analysis on the dynamic stress at the tooth root of a spur bevel gear

直齿圆锥齿轮齿根动应力有限元分析

twin-geared press

双边齿轮驱动压力机

geared reducing press

齿轮传动拉延压力机

increment angle

(圆锥齿轮)齿端角

Investigation on Meshing Theory and Load Capacity of High Performance Unsymmetric Gear with Double Pressure Angles;

高性能双压力角非对称齿轮传动啮合机理及承载能力研究

Accordingly,the least teeth number without undercutting is also decided only by the design pressure angle of the gear,without any relation to the coefficient of addendum height of the gear.

相应的无根切最少齿数也仅取决于正弦齿轮的设计压力角,而与齿顶高系数值无关.

Finite element analysis on root stress of involute cylindrical spur gears

渐开线直齿圆柱齿轮齿根应力的有限元分析

straight and conical gear shaper

直齿-锥齿轮刨齿机