基本释义:

装置模型，元件模型

网络释义

1)device model,装置模型，元件模型

2)components of model,模型元件

3)element model,元件模型

4)component model,元件模型

5)model device,模型装置

6)device model,装置模型

用法和例句

A five-element model is presented based on the test results.

利用三轴流变试验仪,模拟基坑开挖时坑底土体的应力路径,进行卸载流变试验,并提出一个五元件模型对试验结果进行模拟。

Based on the present study situation, the rheological constitutive models of rock and soil are sorted into four kinds: component model, yield sw-face model, endochronic plasticity model and experiential model.

基于岩土流变模型的研究现状，把各种流变模型分成４类：元件模型、屈服面模型、内时模型和经验模型。

By use of standard coefficient method and distance method,a method to quantitatively assess the simulation accuracy of component models is proposed.

结合规范系数法与距离法提出了一种定量判断元件模型仿真准确度的方法。

Based on experimentresearch and model conversion of model device on its 30 incline axial flow pump,it foundthat the comprehensive characteristic curves of model device and reality device,it will beimportant to the design of Xing-Xiagang and other same type pump stations.

采用三维边界无法数值模拟了新夏港泵站的进水流道，并通过对该30°斜轴泵模型装置的试验研究和模型换算，得出了模型及原型装置的综合特性曲线，该成果可作为新夏港和其它相同类型泵站设计的重要依

Based on similitude theory and hydrodynamics,the device model of tubular pumping station in Huangmayong is set up.

按照流体力学相似原理建立了黄麻涌双向竖井贯流泵站流道的装置模型,试验测定了模型泵装置在指定叶片角度下运行的装置综合特性曲线,将泵装置综合特性曲线换算成原型泵的特性曲线,同时试验测定在不同工况运行状态下的汽蚀性能,并观察进出水流道的流态,得到了汽蚀性能结果,提出了建设泵站的注意事项和相应的改进措施。

In order to make the Jiangdu fourth pumping station run stably and safely,three high frequency vibration accelerometers were adapted to measure the vibration characteristics of the device model,and the measurement results were analyzed using RMS of vibration acceleration.

为了确保江都四站轴流泵机组的安全稳定运行,采用三个高频振动加速度传感器对装置模型不同工况下的振动信号进行了采集,并运用加速度有效值对测量结果进行了分析。

Application method of RTDS user define component model (UDC)

RTDS用户自定义元件模型(UDC)的应用方法

Derivation of the theory and relational expression of three elements model, and its application to textile.

介绍了三元件模型理论及其本构关系式的推导,以及三元件模型理论在纺织上的应用。

Element Modeling and System Simulation for Power System Harmonics;

电力系统谐波分析的元件模型和系统仿真

Analysis of Radio-Frequency Device Model and the Design of Low Noise Amplifier;

射频元件模型分析与低噪声放大器设计

Study on MDA Software Modeling Technology Based on Meta Model

基于元模型的MDA软件建模技术研究

Adds a grouping of model elements to your Component diagram.

将一组模型元素添加到组件图中。

Research on Credit Management Architecture Based on Meta-Model;

基于元模型的信贷管理软件构架研究

The Finite Element Modeling and Simulation for Thermomechanical Analysis of PCBA;

PCB组件热—力分析的有限元模型及仿真

Research on Design and Application of Dual-Hall Element Combined Models

双霍尔元件组合模型设计与应用研究

Reserch on Printed Circuit Board Electronic Components Dismantling Model and Experiments

电路板电子元件拆除模型与实验研究

Study on Model and Conformability of SPC System Document for Electronic Components

电子元器件SPC体系文件模型及符合性探讨

The establishment of 3D-FE model libraries for the elements of the RPD

可摘局部义齿各部件三维有限元模型库的建立

Visual Linearized Model of Power System Containing FACTS and Its Application;

含FACTS元件电力系统直观线性化模型及应用研究

The Numerical Optimization of the Stators in Centrifugal Compressor Model Stage with Small Flow Coefficient;

离心压缩机小流量模型级静止元件的数值优化

The Studies of Cellular Automata Models of Traffic Flow with Open Boundary Conditions;

开放边界条件下元胞自动机交通流模型的研究

Finite Element Solution of Coupled Rotor-Bearing System & Software Development;

转子—轴承耦合系统有限元求解模型与软件开发

The Polynomial Model of Circuit and Its Application in Component Matching;

电路的多项式模型及其在元件匹配中的应用

Study on the Dynamic City Model Based on Cellular Automata and Population Condition;

人口条件约束下的城市元胞自动机模型研究