基本释义:

铸塑成型

网络释义

1)cast molding,铸塑成型

2)cast molding,铸塑成形

3)die-casting filling,压铸成型

4)Cast molding,浇铸成型

5)Conticast formation,连铸成型

6)electrotyping forming,电铸成型

用法和例句

Study of Key Technology in Die Casting Processing of Drying Apparatus Shell;

烘干器上壳压铸成型关键技术的研究

Die Casting Technoglogy Study on Thin Mge Shell

镁合金超薄Notebook外壳压铸成型质量控制技术研究

Aimed at die-casting molding of rotor componentsa typical die-casting structure is carried out and design process and key points of mould get described.

针对转子组件的压铸成型,提出一种典型的压铸模结构形式,并对模具的设计过程和要点加以论述。

During die casting, core deformation resulting in batches rejected castings is very easy.

压铸模具的型芯变形失效很容易造成铸件的成批量报废。

Die Design of Full Mold Casting of Small Castings Forming with Steam Pressure

小型铸件蒸压成型机消失模模具的设计

The Mechanism and Application of Negative Pressure EPC Mold Collapse Defect

负压消失模铸造铸型坍塌缺陷的形成机理及应用

Rated-locking force is the main die-casting technology parameter of die-casting machine.

合型力是压铸机主要的压铸工艺参数。

Optimization of Forming Process and Defects Analysis of Aluminum Alloy Die Casting;

铝合金压铸件缺陷分析及成型工艺优化

Flong: The turn over the film so that a mirror-image is produced.

纸型纸（纸型）:铅铸版制膜所用的特别纸张。压制成膜后则称［纸型］。

glass ,cast or rolled, in profiles

玻璃型材,压铸或轧制

Numerical Simulation of Filling and Solidification Process for Casting by Low-Pressure Casting;

低压铸造铸件充型凝固过程数值模拟

CAD System for Cylindric Magnesium Alloy Casting by Low Pressure Casting Process;

圆筒型镁合金铸件低压铸造工艺CAD

Impact of Joint Face of Casting Die to Craft Character;

论压铸模分型面对铸件工艺性的影响

RELATIONSHIP BETWEEN METAL-DIE INTERFACIAL HEAT TRANSFER COEFFICIENT AND CASTING SOLIDIFICATION RATE IN HIGH PRESSURE DIE CASTING PROCESS

压铸过程中铸件-铸型界面换热系数与铸件凝固速率的关系

Research on Numerical Simulation of Die Casting of Aluminum Alloy Die Castings

铝合金压铸件压力铸造成形数值模拟研究

(of molten metal or glass) formed by pouring or pressing into a mold.

（指金属或玻璃熔铸的）倒入或压入模子中使之成型。

Research on Semi-solid Die Casting Processing of Forming AZ91D Magnesium Alloy Kickstand of Generator of the Type of JH70 Motorcycle;

AZ91D镁合金半固态高压铸造成形JH70型摩托车发电机支架零件的研究

Research on Semi-solid Die Casting Processing of Forming ZL112Y Aluminum Alloy Kickstand of Generator of the Type of JH70 Motorcycle;

ZL112Y铝合金半固态高压铸造成形JH70型摩托车发电机支架零件的研究