基本释义:

结晶形态

网络释义

1)Crystal morphology,结晶形态

2)crystalline morphology,结晶形态

3)Crystallization morphology,结晶形态

4)morphology,结晶形态

5)crystalline state,结晶形态

6)Electrocrystal formation,电结晶形态

用法和例句

SEM observation revealed that three kinds of crystal morphology formed orderly with the increase of PC ratio,i.

SEM观察表明,随PC比例的增加,共混物高压下主要结晶形态以伸直链晶体,生长成熟的立体开放球晶,大尺寸球晶的方式变化。

The crystal morphology of hydroxyapatite synthesized in the mineralizing surroundings was affected by hydrogen bond between hydroxyapatite and mineralizer.

本文着重研究了氢键对羟基磷灰石结晶形态的影响,建立了矿化剂OH—晶面OH动态平衡吸附模型,引入动态平衡吸附参数k,用来描述这种影响的程度。

Results showed the crystal morphology of HAp has a great impact on absorption.

结果表明,HAp晶体的结晶形态对吸附效果有很大影响。

Effects of Nucleator on Crystalline Morphology and Mechanical Properties of Polypropylene;

成核剂对聚丙烯结晶形态和力学性能的影响

Isothermal crystalline morphology of isotactic polypropylene (iPP) with clarifying nucleator - TM-3 was observed by polarized light microscope.

利用偏光显微镜观察了等规聚丙烯(iPP)在透明成核剂TM-3作用下的等温结晶形态,并与普通成核剂苯甲酸钠的影响作了对比。

Their crystalline morphology was characterized by using polarizing light microscopy,which were contrast to HDPE/elastomer blends.

通过DSC分析仪和偏光显微镜研究了共混物的熔融、结晶行为和结晶形态,并将其结晶形态与简单共混对照样加以对比研究。

The crystallization morphology of PCL in the blends can be changed with the crystallization temperature and the NC content obviously.

聚己内酯结晶形态随结晶温度和共混物组成的变化表明 ,在共混体系中聚己内酯结晶速率与非晶第二组分的扩散速率存在一定的匹配关系 ,是影响环带球晶形成的重要因

The crystallization morphology and isothermal crystallization process were studied by means of polarized microscope and DLI(Depolarized Light Intensity) for poly(ether ester) block copolymers.

采用偏光显微镜和光学解偏结晶速率仪研究了嵌段聚醚酯共聚物的结晶形态和等温结晶过程。

in order to understand the toughness mechanism of HDPE/HAP composite prepared by in situ biomineralization,the crystallization kinetics and morphology of HDPE/HAP composite were investigated.

研究了原位矿化复合方法对HDPE/HAP复合材料中HDPE的结晶形态及结晶动力学的影响,结果表明,原位矿化复合方法制备的复合材料中HDPE主要以放射状伸直晶形式存在,HDPE晶粒细小,结晶度高,且HAP与HDPE界面结合紧密。

The morphology of the.

用示差扫描量热法(DSC)研究了蒙脱土对聚丙烯及马来酸酐接枝聚丙烯的非等温结晶行为的影响;用偏光显微镜(POM)观察了聚丙烯及共混体系的结晶形态,估算了径向生长速率。

Research on Self-nucleation of Copolymer Polypropylene and the Crystallization Kinetics and Morphology of High Impact Polypropylene Copolymer;

高抗冲聚丙烯(HIPP)与等规聚丙烯(iPP)结晶动力学、结晶形态进行研究发现,HIPP的结晶温度和熔融温度均低于iPP,等温结晶动力学表明,HIPP与iPP相比较,半结晶时间要长,结晶活化能和端表面自由能也要高。

Polypropylene with various crystalline states was synthesized by experiments and analyzed by SEM.

运用实验方法合成了不同结晶形态的聚丙烯 ,并通过扫描电镜及实验结果进行分析。

Their crystalline state in benzene is examined by polarized microscope.

以四庚基溴化铵为相转移试剂将该系列杂多化合物转移至有机溶剂苯中，通过偏光显微镜研究了其在苯溶液中的结晶形态。

Their crystalline state in benzene are examined by various-temperature wide angle X-ray diffraction and polarized microscope.

以四庚基溴化铵为相转移试剂将该系列杂多化合物转移至有机溶剂苯中，通过变温广角Ｘ－ｒａｙ衍射及偏光显微镜研究了其在苯溶液中的结晶形态。

The "Reversal" Phenomenon of Crystalline Pattern on AlOOH Nano-whiskers Growth

纳米AlOOH晶须生长结晶形态的“逆转”现象

CRYSTALLIZATION AND MORPHOLOGY OF HIGH CIS 1,4-POLYBUTADIENE

高顺式-1,4-聚丁二烯的结晶形态研究

Micro/Nanoscale Research on Crystallization Behaviors of Copper Compounds

微纳尺度下铜化合物的结晶形态研究

Crystalline Morphology of PLLA-PDLA Copolymer Films

PLLA-PDLA共聚物薄膜的结晶形态

Study of Crystalline Morphologes and Kinetics in Miscible Crystalline/Crystalline Polymer Blends

相容性结晶/结晶聚合物共混体系独特结晶形态及结晶动力学的研究

Influence of Si crystallization evolution on 1.54 μm luminescence in Er-doped Si/Al_2O_3 multilayer

掺铒Si/Al_2O_3多层结构中结晶形态对1.54μm发光的影响

Influence of Organic Template on BaTiO_3 Crystallizing Habits in the Hydrothermal Method;

水热反应中有机物模板对BaTiO_3结晶形态的影响

To assume a crystalline form.

使结晶采取晶体的形态

Hot Deformation and Dynamic Recrystallization Behaviors of 316LN

316LN热变形行为及动态再结晶晶粒的演变规律

The Spherulitic Morphology of Nylon 612 and Its Formation Conditions in Isothermal Crystallization

尼龙612等温结晶的球晶形态与生成条件

Effect of Nucleating Agent on Crystal Morphology and Crystallization Behavior of LLDPE

成核剂对LLDPE晶体形态及结晶行为的影响

Crystallization and Phase Morphology of iPP/EBR Binary Blend

iPP/EBR合金的结晶和相形态

Static recrystallization of magnesium alloy AZ31 after severe deformation

强变形AZ31镁合金的静态再结晶

Static recrystallization behaviors of deformed 42CrMo steel

42CrMo钢形变奥氏体的静态再结晶

Nucleation of dynamic recrystallization of titanium alloy TA15 during hot deformation process in β field

TA15钛合金β热变形中的动态再结晶形核

Effects of CTC-NO claw macromolecule on crystal structure and configuration of wax in diesel

爪形大分子CTC-NO对柴油蜡晶结构和形态的影响

Effects of deformation temperatures on plastic formation and microstructure evolution of 42CrMo steel

形变温度对42CrMo钢塑性成形与动态再结晶的影响

Crystallization of a compound in at least two distinct forms.

多晶形一种化合物以至少两种不同的形态结晶的现象