基本释义:

塑性流

网络释义

1)plastic flow,塑性流

2)plastic flow,塑性流动

3)Plastic fluid,塑性流体

4)plastic flow,塑性流变

5)plastic mudflow,塑性泥流

6)resistance to plastic flow,抗塑流性

用法和例句

Hot compressive deformation behaviors of Ti-6Al-2Zr-1Mo-1V alloy and its plastic flow equation;

Ti-6Al-2Zr-1Mo-1V合金的热压变形特性及塑性流动方程

Numerical simulation computation of plastic flow of a working solid rocket motor case;

固体发动机壳体工作状态塑性流动数值模拟

The experiment showed that the mode of deformation and the plastic flow mechanism of solid and liquid phase under different solid phase ratio were different;and the microscopic structure was difˉferential in different position of the part.

实验表明:半固态浆料模锻成形的变形方式是不同的,不同的固相率下其固液两相的塑性流动机制也是不同的;而且制件不同部位的微观组织形貌也有差异。

The material plastic flow in friction stir welding is very important in shaping the welding seam; it determines the quality of welded joint.

搅拌摩擦焊焊缝金属塑性流变直接关系到焊缝组织形成,是决定焊缝质量的关键。

Loess plastic mudflow is a find of mudflow with high unit weight more than 1.

本文以甘肃天水和榆中的黄土塑性泥流为例，探讨了黄土塑性泥流的动静力学特征和成因机理。

The Applications of the MSG in Geomaterials

MSG塑性流动理论在岩土介质中的应用

Common methods used to study the superplastic material flow of friction stir welding

搅拌摩擦焊接塑性流体流动的常用研究方法

Local Differential Quadrature Method in Flow Problems of Viscous and Plastic Fluid in Duct

管道中粘塑性流体流动问题的局部微分求积法

Visco-Plastic Rheological Properties and a Nonlinear Creep Model of Soft Rocks

软岩黏弹塑性流变特性及非线性蠕变模型

A NONLINEAR VISCOELASTOPLASTIC RHEOLOGICAL MODEL BASED ON NISHIHARA'S MODEL

基于西原模型的非线性黏弹塑性流变模型

NETLIKE DISTRIBUTION OF MAGMATITE AND PLASTIC FLOW NETWORKS IN CENTRAL AND EASTERN ASIA

亚洲中东部岩浆岩网络状分布与塑性流动网络

Numerical simulation computation of plastic flow of a working solid rocket motor case

固体发动机壳体工作状态塑性流动数值模拟

Rheological and Phase Transition Properties of Thermoplastic Starch Under the Plasticization of Glycerol

甘油增塑热塑性淀粉的流变相变性质

testing method for melt flow rate of thermoplastics

热塑性塑料熔体流动速率试验方法

testing method for flow properties of thermoplastics with a capillary rheometer

热塑性塑料的流动性质试验-毛细管流变仪法

Test method for melt flow rate of thermoplastics

GB/T3682-1983热塑性塑料熔体流动速率试验方法

An additive that improves the flow of plastics during fabrication.

助熔剂在制塑过程中提高塑料流动性的添加剂

The Research on Mechanism of Ultra-fine Comminution of Thermoplastic Plastic with Turbulent Flow Pulverizer under Ambient Temperature;

常温下热塑性塑料的湍流超细粉碎机理研究

Study on Modified Plastic Rheological Property of HDPE/CaCO_3;

改性碳酸钙填充HDPE塑料流变性能研究

The Study of Pulverizing and Simultaneous Modification of Weight-Calcium Carbonate With Jet Mill;

塑料用重质碳酸钙改性气流粉碎研究

Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation

GH4145高温合金热塑性变形流变应力研究

The elastic-plastic analysis of concreted beam based on rheological effect

基于流变效应混凝土梁的弹塑性分析

Test method for rectangular flow cure properties of thermosetting moulding compounds

GB/T5472-1985热固性模塑料矩道流动固化性试验方法