基本释义:

表面卵裂

网络释义

1)superficial cleavage,表面卵裂

2)cleavage plane,卵裂面

3)The surface of eggshell,卵壳表面

4)surface crack,表面裂纹

5)Surface longitudinal crack,表面纵裂

6)surface crack,表面龟裂

用法和例句

Preventive to surface crack of MB15 magnesium alloy Φ482 mm ingot;

MB15镁合金Φ482mm铸锭表面裂纹的预防措施

Surface Cracks in TP2 Copper Tube Billets in Horizontal Continuous Casting;

TP2铜管坯水平连铸表面裂纹研究

An Analysis on Surface Cracks Formation of H Beam of Nb-V Microalloying Steel BS55C;

Nb-V微合金化H型钢BS55C表面裂纹成因分析

This article brings forward the reasons and countermeasures of the transverse corner crack and surface longitudinal crack of the CC slab.

简述了太钢二炼钢厂碳钢连铸生产线生产的板坯出现的缺陷,分析了板坯的角横裂、表面纵裂的成因,提出了防止裂纹而采取的措施。

4 continuous slab caster production in Jiuquan Steel steelmaking plant, the influence of billet components, continuous casting process parameters and equipment conditions on the slab surface longitudinal cracks, triangular zone cracks and inter-columnar cracks was analyzed.

课题通过对酒钢炼钢厂4号板坯连铸机生产的现场调查、测试和统计,分析了钢坯成分、连铸工艺参数以及设备状况对板坯主要缺陷:表面纵裂、三角区裂纹和中间裂纹的影响,并采用铸坯硫印、低倍检验、扫描电镜及能谱分析等方法对铸坯三种裂纹产生的机理和原因进行分析研究。

An analysis of the surface cracks on hot-rolled wide plates;

热轧宽板表面龟裂问题的分析

ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS

连铸板坯内部裂纹和表面裂纹的形成机理

No stress measurements or crack surface samples were available for examination, only the surface crack configuration.

没有应力测量或裂纹表面取样可用于检验，只能依据表面裂纹图形。

BEM Analysis of Transient Response in Surface Crack Problems

表面裂纹问题瞬态响应的边界元分析

The Remaining Strength Assessment of Pipeline Containing 360°Cir- cumferential Surface Crack,

含360°表面裂纹管道剩余强度评价

Thermal-elastic Fracture of Hollow Cylinder with a Semi-elliptic Surface Crack

含表面裂纹圆柱壳体的热力耦合效应

Analysis on Reasons of Surface Cracks Formation of S355 Round Tube Blank and Corresponding Countermeasures Taken

S355圆管坯表面裂纹成因及解决对策

Standard test method for surface-crack fracture toughness Kle of metallic plates

GB/T7732-1987金属板材表面裂纹断裂韧度Kle试验方法

External defects: undercut,overip,arc pit, gas cavity in surface,crack in surface.

外部缺陷：咬边、焊瘤、弧坑、表面气孔、表面裂纹。

3-D FRACTURE MECHANICS CHARACTERISTICS AND CRITERION FOR PIPELINE STEEL WITH SURFACE CRACK

管线钢表面裂纹体的三维断裂特性和断裂判据研究

To cause(china, for example) to become covered with a network of fine cracks.

使（瓷器等）表面出现网状的细裂纹

glazed china with a network of fine cracks on the surface.

表面有网状裂纹的光滑的瓷器。

Cracks grow in directions nearly parrallel to the surface.

裂纹在近乎平行于表面的方向上生长。

A core was removed from this area so that the crack surfaces could be examined.

从这一区域取样芯，以便检验裂纹表面。

Analyses of cause for transverse cracks on CC slab surface

连铸板坯表面横向裂纹产生原因分析

Study On Longitudinal Surface Cracks On CSP Hot-Rolled Plate

酒钢CSP热轧板卷表面纵裂纹研究

Surface Network Cracks in Low Carbon Boron Steel Casting

低碳硼合金钢表面网状裂纹成因分析

ANALYSIS ABOUT NET-SHAPE CRACKS ON THE SURFACE OF A350 LF6 CONTINUOUS CASTING BILLET

A350 LF6连铸坯表面网状裂纹分析

CAUSE ANALYSIS FOR SURFACE LONGITUDINAL CRACKS ON Q235B SLAB

Q235B钢板坯表面纵裂纹的原因分析