基本释义:

切变矢量,切变向量

网络释义

1)shear vector,切变矢量;切变向量

2)Tangent direction verctor,切向矢量

3)shear modulus,切变模量

4)Apodization,变量切趾

5)shearing modulus,切变模量

6)Unit tangential(normal) vector,单位切(法)向矢量

用法和例句

P-SV reflection coefficient approximation using shear modulus and its significance in multiwave AVO inversion;

用切变模量近似P-SV波反射系数及在多波AVO反演中的意义

Relation between a steel wire’s shear modulus and torsional angle;

钢丝的切变模量与扭转角度关系

An ultrasonic method of measuring shear modulus of solids is investigated.

研究利用扭转超声脉冲测量固体材料切变模量的动力学新方法与新技术 。

Application of Apodization Method in SAR/ISAR Processing;

变量切趾技术在SAR/ISAR图像处理中的应用

This paper put forward a method to improve a torsion pendulum using vertical axis theorem,which can enhance the moment of inertia and the accuracy of material s shearing modulus and verify the vertical axis theorem and understand the application of vertical axis theorem.

运用垂直轴定理对扭摆进行改进,经改进后的扭摆不仅提高测量转动惯量和材料切变模量的准确度,而且可以直接验证垂直轴定理,了解垂直轴定理的应用。

The shearing modulus of steel wire changes in accordance with its turning angle.

研究了钢丝的切变模量随其扭转角度变化而变化的情况,观察到扭转角大于某一角度时,切变模量趋于定值的规律,得出扭摆实验准确测量的方法,此测量方法在其他许多力学实验中也可应用。

" Metallic material-Standard test method for the Young's modulus, shear modulus and Poison's ratio (Dynamic method)"

GB/T2105-1991金属材料杨氏模量、切变模量及泊松比测量方法(动力学法)

Research of Relationship between Shearing Mold Amount of Steel Wire and its Turning Angle;

钢丝的切变模量与扭转角度关系的研究

Design and Analysis of Testing Method of Determining Optic Fibers Displacement of Shear Modulus of Man-made Diamond;

人造金刚石切变模量的光纤位移检测设计与分析

Estimation of the Deformation-Modulus in Sandy Soils by the Shear-Modulus of pressuremeter Test

用旁压剪切模量推算砂性土地基的变形模量

Transform the Pattern of Medical Records Quality Control to Improve Internal Quality of Medical Records

转变病案质量控制模式 切实提高病案内涵质量

Analysis on the shear modulus of MR elastomer based on chain-like model

基于链化分析的磁流变弹性体剪切模量模型

Cyclic Stress History Effects on Small-strain Shear Modulus of Silt;

循环应力历史对粉土小应变剪切模量的影响

Effect of stress path circumgyration on shear modulus under small strain

小应变条件下应力路径旋转对剪切模量影响

Figure 5. Shear and bulk modulus relation for sandstone and weakly cemented sands.

图5.砂岩和弱胶结砂体中剪切模量和体变模量之间的关系。

Comparison of the Relaxation Moduli in Step Strain and the Generalized Elastic Moduli in Dynamic Shear of Polydimethylsiloxane

PDMS在阶跃应变中松弛模量与动态剪切中广义弹性模量的比较

An Invesitigation of Small Strain Shear-Modulus Anisotropy Based on Experiments and Numerical Smulation

砂土小应变剪切模量各向异性试验研究及数值模拟

Formulae of Force at a Point in the Interior of a Half-Space with Shear Modulus Linearly Varied with Depth

集中力作用于剪切模量沿深度线性变化的半空间的公式

Analytical Study on Non-homogeneous Subgrade with Continuous Variation of Shear Modulus Versus Depth;

土体剪切模量随深度连续变化非均质地基解析研究

The derived dry bulk modulus must be positive and greater than 2/3 of shear modulus to insure a positive lame constant and Poisson's ratio.

提取的干燥体变模量必须为正，并且大于剪切模量的2/3，以保证拉梅常数和泊松比为正。

Modification of SCG Model for Shear Modulus Calculation

一个修正的SCG剪切模量计算模型

everything had undergone a misty sea-change and every outline had become blurred.

一切都失了鲜明的轮廓，一切都在模糊变形中了。

Experimental Study on Relation between Dynamic Elastic Modulus and Shear Modulus of Soil;

土体动弹性模量与动剪切模量关系对比研究

Keywords: electrorheological fluid, flow mode, mixed mode, shear mode, damper.

关键词：电流变液、动模式、合模式、切模式、尼器。