基本释义:

真空吸出

网络释义

1)vacuum extraction,真空吸出

2)vacuum extractor,真空吸出器

3)effluent vacuum suction,真空抽吸出水

4)vacuum extraction,真空吸出(吸胎儿用)

5)vacuum suction,真空吸铸

6)vacuum attracting instrument,真空吸具

用法和例句

Design was made on automatic control system of SMBR effluent vacuum suction with high strength Chinese traditional medicine wastewater as the treatment object.

　当浸没式膜生物反应器(SMBR)采用真空抽吸出水时一般不能连续运行,为此以高浓度中药废水为处理对象,对SMBR的真空抽吸出水自控系统进行了设计。

Study on Vacuum Suction Process for Complicated Thin-walled Aluminum Alloy Castings;

薄壁复杂铝合金精铸件真空吸铸工艺研究

A Thin wall intricate aluminium alloy housing was casted with vacuum suction,and the casting was poured with three different filling velocities: 25mm/s,40mm/s and 25mm/s fill 6 seconds,then 40mm/s,X-ray was used to detect the mentallurgical quality of these castings.

研究了薄壁铝合金铸件真空吸铸充型速度对其内部质量的影响,对一种��200mm×180mm,壁厚为2。

The Method to Manufacture Composite Bending Pipes by Expendable Pattern Casting under Vacuum

用消失模真空吸铸法制备双金属复合弯管

Study on Vacuum Suction Casting for TiAl-Based Alloys

TiAl基合金金属型真空吸铸成形方法研究(英文)

Investigation on Suction Casting Control Technology for Titanium Alloy Parts

钛合金构件真空吸铸成形控制技术的研究

Study on the preparation of wear resistant surface cast by vacuum-full mould casting

真空实型铸造法制备表面耐磨铸件研究进展

The Mechanism of the Mold Collapse Defect for Iron Casting in Expendable Pattern Casting Process with Dry Sand and Vacuum

真空消失模铸造铸铁件铸型坍塌缺陷成因的研究

open-width suction dryer

平幅真空吸水干燥机

To clean with or use a vacuum cleaner.

使用真空吸尘器（打扫）

They have not get a vacuum cleaner.

他们没有真空吸尘器。

clean(sth)with a vacuum cleaner

用真空吸尘器清扫（某物）

household vacuum cleaner-blower motor

家用真空吸尘器电风机

rotation of fetal head by vacuum extractor

真空吸引器旋转胎头术

Eimco belt filter

旋转带式真空吸滤机

downdraft constant - vacuum carburettor

下吸式恒真空度化油器

vacuum cleaner alloy

真空吸尘器用铝铜合金

The porter turned off the vacuum.

清洁工关掉真空吸尘器。

Vacuum Cleaner Agent Realized by JAVA

真空吸尘器Agent的JAVA实现

Mould filling of low-pressure expendable pattern casting process for magnesium alloys

镁合金真空低压消失模铸造充型特征

Design method of the vacuum die-casting mould for large-scale thin shell part

大型薄壁件真空压铸模具的设计方法