基本释义:

中性啮合

网络释义

1)neutrocclusion,中性啮合

2)mesh/meshing features,啮合/啮合特性

3)meshing performance,啮合性能

4)Meshing behavior,啮合性态

5)mesh characteristic,啮合特性

6)elastic meshing,弹性啮合

用法和例句

For better meshing performance,included angle between directions of relative velocity and contact line,and induced normal curvature were selected as optimization objects.

为提高TI蜗杆承载能力、获得良好的蜗杆传动啮合性能,以接触线方向和相对速度方向的夹角、诱导法曲率为优化目标。

The meshing performance and the manufacture of offset cylindrical worm gearing is the primary concern.

给出渐开线偏置圆柱蜗杆传动齿面的边界条件;重点分析了设计参数对渐开线偏置圆柱蜗杆传动啮合性能的影响,分析表明各设计参数对啮合性能的影响一般不是特别显著,这使得蜗杆副具有设计、制造和安装都更为容易的优势。

From the point of view of tooth flank contact analysis,the effects of design parameters including center distance,module and face width of worm wheel on meshing performance of single enveloping TI(Toroidal Involute) worm gearing are analyzed.

从齿面接触分析的角度,分析了设计参数中心距、模数和蜗轮齿宽对一包TI蜗杆传动啮合性能的影响。

Thepaper develops the generation principle of the gear tooth and the mesh characteristic and deduces the equation of the toothsurface, in order to provide theory.

着重从弧齿线圆柱齿轮齿面的齿面形成原理及啮合特性方面对该齿轮进行了分析和研究,推导出被加工齿轮齿面方程,目的在于为该齿轮的设计提供必要的理论依据。

The paper develops the generation principle of the gear tooth and the mesh characteristic and deduces the equation of the tooth surface, in order .

文中着重从弧齿线圆柱齿轮齿面的形成原理及啮合特性方面对该齿轮进行了分析和研究,推导出被加工齿轮齿面方程,目的在于为该齿轮的设计提供必要的理论依据。

Finite element analysis on tooth modification of heavy load gears based on the theory of elastic meshing;

基于弹性啮合理论的重载齿轮齿面修形的有限元分析

On the basis of considering the tooth profile theoretic clearance of inner meshing gear pairs and elastic deformation of gears, the theoretic analytical model was established for number of actual contacting tooth pairs of elastic meshing of three-ring transmission and load distribution among each tooth.

在考虑内啮合齿轮副齿廓理论间隙、轮齿弹性变形的基础上 ,建立了三环传动弹性啮合实际接触齿对数及各齿间载荷分配的理论分析模型 ,提出了在齿轮强度计算中计入弹性啮合效应系数的方法 ,并按照静强度校核的方法考虑了制造误差的影响。

Research of the Gearing Characteristics between Plastic Worm Wheel and Steel Worm;

塑料蜗轮与钢制蜗杆的啮合性能研究

Sensitivity analysis of adjustive parameter of machine tool for klingelnberg spiral bevel gear

摆线锥齿轮机床调整参数对啮合性能作用分析

Effects of Design Parameters on Meshing Performance of Single Enveloping TI Worm Gearing

设计参数对一包TI蜗杆传动啮合性能的影响

Study of Kinematics and Meshing Characteristic of Harmonic Gear Drives Based on the Deformation Function of the Flexspline;

基于柔轮变形函数的谐波齿轮传动运动几何学及其啮合性能研究

Meshing Analysis of Non-backlash Double Roller Enveloping Hourglass Worm Gearing

无侧隙双滚子包络环面蜗杆传动的啮合性能分析

Performance Analysis of Gear Drive with Equivocal Modification Meshing beyond Pitch Point;

等变位节点外啮合齿轮传动性能分析

Study on Transient Meshing Performance of the Gear of the Vehicle Gearbox;

汽车变速器齿轮啮合瞬态性能分析研究

STUDY ON THE DYNAMICAL PERFORMANCE OF END FACE ENGAGEMENT CYCLOID STEEL BALL PLANETARY TRANSMISSION;

端面啮合摆线钢球行星传动的动力性能研究

Research of Peculiarity of Engagement of Spiral Meshing Pair of Single Screw Compressor;

单螺杆压缩机螺旋啮合副啮合特性研究

Study on the Meshing Characteristics and CAD Technique of Cycloidal Gear Pump;

内啮合齿轮泵啮合特性分析及CAD技术研究

Research on meshing characteristics-based design of point-contact tooth surface

基于预定啮合特性的点啮合齿面设计方法

The Simulation of Dispersive Performance of the Intermeshing Co-Rotating Twin-Extruders;

啮合同向双螺杆挤出机分散混合性能的数值模拟研究

Study on Properties of Mixing Elements in Melt Conveying Zone of Intermeshing Counter-Rotating Twin Screw Extruder;

啮合异向双螺杆挤出机熔体输送段混合元件性能的研究

Effect of Co-Rotation Twin-Screw Extruder Screw Assembly on Mechanical Performance of Glass Fiber-Reinforced AS

同向啮合双螺杆挤出机螺杆组合对玻纤增强AS力学性能的影响

Integrated Performance Research for Inner-engaged Oil Pump with Shifting-engine

基于提高内啮合-摆线转子式机油泵综合性能的研究

Investigation on Meshing Theory and Load Capacity of High Performance Unsymmetric Gear with Double Pressure Angles;

高性能双压力角非对称齿轮传动啮合机理及承载能力研究

Its interlocking teeth would spring open or jam.

拉链上互相啮合的齿能拉开也能合拢。

Study of Micro-External Gear Pump Impact Affected by the Tolerance of Gear's Parameter;

齿轮参数加工公差对微型外啮合齿轮泵性能的影响研究