基本释义:

应变能，变形能

网络释义

1)strain energy,应变能，变形能

2)strain energy of distortion,畸变应变能

3)deformation properties,变形性能

4)deformation energy,变形能

5)deformability

[dif?:m?'biliti],变形能力

6)deformation energy,形变能

用法和例句

Experimental research on deformation properties and stress-strain curve of C30 recycled concrete

C30再生混凝土变形性能及应力-应变曲线试验研究

Influence of polyacrylonitrile fiber on mortar deformation properties

聚丙烯腈纤维对砂浆变形性能的影响

This paper is involved in the research of the preparation, mechanic properties, deformation properties, low-temperature properties and the modified mechanism of the new type elastic epoxy materials.

弹性环氧材料由于大幅度提高了环氧树脂的韧性和变形性能,因此对混凝土坝或混凝土面板堆石坝表面裂缝处理、混凝土一般过流面的大面积防护处理等可发挥良好作用。

Setting up a rollforming model with the same forming sequence,two different materials DP800 and Q235 have been applied to the model in order to compare their spring back angles and deformation energy.

建立了圆角辊弯模型,将DP800钢和Q235钢用于该模型进行分析,结果表明随着成型角度的增大,与Q235钢相比,DP800钢的回弹增量及辊弯变形能增量均有增加的趋势。

Based on the assumption, the computer was used to calculate the minimum deformation energy, and the speed distribution in the deformed area and the drawing force were gotten.

在此基础上利用流函数建立了变形区速度场，并利用计算机对变形能进行求极小值，得到了变形区的速度分布及拉拔力。

The relation formula of hysteretic energy and deformation energy of MDOF structures as well as the equivalent SDOF systems based on the energy equation is developed.

提出了研究单自由度体系和多自由度体系在地震作用下耗能关系的重要意义;建立了结构的等效单自由度体系能量方程,得出与原多自由度体系滞回耗能及变形能关系公式,据此提出了基于等效单自由度体系的多自由度结构体系总滞回耗能估计方法。

Cyclic Behaviour, Deformability and Rigidity of Stiffened Steel Shear Panels;

增强钢剪切板的周期性能、变形能力及刚度分析

The deformability and relevant property indexes of pipeline steel and delivery pipe have been summarized in this paper.

综述了管线钢及输送管的变形能力及相关指标。

The deformability of under-matched X80 grade pipeline steel welding joint was studied through Finite Element Method.

采用有限元法对低匹配条件下X80钢级管线钢焊接接头的变形能力进行了研究。

Experiment Study on Deformation Performance and Hysteretic Characteristic of SRC Columns;

SRC柱变形性能及恢复力特性试验研究

Preparation and Deflection Character research of Susceptible Composite Film

磁性复合膜的制备及其磁致变形性能

Research on Bearing and Deflecting Capacity of Point-Supported Glass Plate;

点支式玻璃板的承载性能与变形性能研究

Summarization of Study on Deformation Properties and Durability of RAC

再生骨料混凝土变形性能和耐久性能研究综述

Study of concrete deformation and heat performance for Jinghong hydropower station

景洪水电站混凝土变形性能及热学性能研究

The Study on Secondary Development & Large Deformation of ANSYS;

ANSYS二次开发及其大变形性能研究

distortion energy plasticity condition

形状变形能塑性条件

Textural Evolution and Mechanical Properties of Wrought Magnesium Alloy AZ31

变形镁合金AZ31的织构演变与力学性能

Deforming resistance is capability of material resisting deform.

变形抗力是材料本身抵抗塑性变形的能力。

A method to improve seal property by plastic deformation;

一种用塑性变形改善密封性能的方法

Research on Deformation Mechanism and Relationship Between Microstructure and Properties of Quenching and Partitioning Steel

Q&P钢塑性变形机制及组织-性能研究

Resilience is the capacity of a material to absorb energy during elastic deformation.

弹性是指材料在弹性形变中吸收能量的能力。

The Effect of ECAP Deformation on Mechanical Property and Damping Capacity of AZ31 Magnesium Alloy;

ECAP变形对AZ31镁合金力学性能与阻尼性能的影响

test method to prove the resistance to initial ring deflection

检验初始环状变形可能性的方法

An elastic body automatically restores itself after deformation.

弹性体变形后能自动复原。

The basic property study of the automobile weather-strip seals compression deformation

轿车密封条压缩变形的基础性能研究

Preparation of Nanostrctured 2024 Al, Structure and Properties Based Severe-Plastic-Deformation;

纳米结构2024Al的强变形制备、结构及性能

Microstructure and Properties of 12MnNb Steel Processed by Equal Channel Angular Processing;

12MnNb钢的ECAP变形及组织性能研究