基本释义:

载荷圆盘

网络释义

1)load-bearing disc,载荷圆盘

2)harmonic disk loads,圆盘状简谐荷载

3)disk loaded,盘荷加载

4)load from rotary table,转盘载荷

5)the loads acting on the cutterhead,刀盘载荷

6)circular load,圆形荷载

用法和例句

By using the formulas of displacement responses of transversely isotropic elastic strata to harmonic ring loads, the general formulas of displacement responses of transversely isotropic elastic strata to harmonic disk loads are derived.

文章利用文献[1]中所推导的环形荷载作用下,横观各向同性层状场地的位移响应公式,将它们沿径向进行积分,给出了横观各向同性层状场地对圆盘状简谐荷载位移响应的一般形式,并举例说明各种参数对这些响应的影

A variational method for the analysis of the disk loaded coaxial cavity is proposed.

给出分析复杂盘荷加载谐振腔的变分方法 ,由各个子区的场表达式结合场匹配技术得到了子区之间满足的边界条件 。

And the design of the cutterhead is based on the loads acting on the cutterhead.

但是由于刀盘和掘进界面是一个非常复杂的整体耦合系统,目前并没有很好的确定刀盘载荷的方法。

The Fully Coupled System of the Excavation Face and the Determination of the Loads Acting on the Cutterhead of a Compound Shield

复合盾构掘进界面整体耦合系统及刀盘载荷确定方法

ELASTICTTY-PLASTICITY ANALYSIS METHOD FOR SQUEEZED BRANCH PILES UNDER LATERAL LOADS

水平荷载作用下支盘桩的弹塑性分析

Test Research on the Bearing Capacity of Disc Pile under Horizontal Loads

支盘桩在水平荷载作用下的承载性状试验研究

Research on the Characteristic of the Disk-loaded Waveguide, Rib-loaded Disk-loaded Waveguide and Helix Slow-wave Structures;

盘荷波导、脊加载盘荷波导和螺旋带慢波系统特性研究

Study on the Load and Strength Analysis of Cutter Suction Dredger s Bridge;

绞吸式挖泥船绞刀架载荷计算和强度分析

Cutting Force Calculation Based on 2-D Soil-Cutting Theory and the Stress Analysis of Cutterhead by ANSYS;

基于二维切削理论的绞刀切削载荷计算及绞刀应力状态的ANSYS分析

Loading Transfer Behavior Experimental Study and Theoretic Analysis of Squeezed Branch Pile under Pulling Loading;

上拔荷载作用下挤扩支盘桩荷载传递规律的试验与理论分析

The Design Disk-model Constant Load Material Tester and Research of Constant Load Test;

圆盘式定载荷全息材料试验机及定载荷试验研究

Finite Element Analysis of Cast-In-Situ Piles with Expanded Branches and Plates under Lateral Load;

水平荷载作用下挤扩支盘桩的有限元分析

Project Behavior of Disk Pile under Repeated Loading;

支盘桩重复荷载作用下的工程性状研究

A Study on Load-Transferring Mechanism and Engineering Application of Cast-in-Place Pile with Branches and Plates;

支盘灌注桩的荷载作用机理与工程应用研究

The Test Study on the Loading Transfer Mechanism of Model Piles with Branches and Plates

支盘桩在竖向荷载作用下的工程性状研究

Project Performance Study of Model Piles with Branches and Plates under Repeated Load in Silty Clay

重复荷载作用下支盘桩的工程性状试验研究

ANALYSIS OF BEARING LOAD CHARACTERISTIC OF SQUEEZED BRANCH AND PLATE PILE GROUP FOUNDATION UNDER LATERAL LOAD

水平荷载下挤扩支盘桩群桩受力特性分析

Load distribution analysis in a single row four-point-contact slewing ring

单排四点接触球转盘轴承的载荷分布分析

The Effect of Fatigue Load on the Lumbar Disc Morphology after Disectomy: A Pig Model

猪腰椎间盘髓核摘除术后疲劳载荷对椎间盘形态的影响

Bearing Capacity Experimental Study and Settlement Calculation of Cast-in-Situ Piles with Expanded Branches or Plates under Vertically Loading;

竖向荷载作用下挤扩支盘桩承载力试验研究和沉降计算

Research Progress on the Project Behaviorof Pile under Pullout Loads;

挤扩支盘桩在上拔荷载作用下承载能力的试验研究