基本释义:

真空感应熔炼

网络释义

1)vacuum induction melting,真空感应熔炼

2)VIM,真空感应熔炼

3)vacuum induction melting(VIM),真空感应熔炼

4)vacuum induction melting (VIM),真空感应熔炼(VIM)

5)semi continuous vacuum induction semelting furnace,半连续真空感应熔炼炉

6)vacuum melting,真空熔炼

用法和例句

A Study on Oxygen Contamination from Crucible Material on Molten Steel during Vacuum Induction Melting;

真空感应熔炼过程炉衬材料向钢液供氧现象的研究

The denitrogenation behavior during vacuum induction melting (VIM) Ni-base superalloy using CaO crucible was studied.

研究了采用CaO坩埚真空感应熔炼镍基高温合金过程中的脱氮行为。

The changes of carbon and oxygen contents and the influence of carbon and aluminium on deoxidation during vacuum induction melting (VIM) refining Ni-6Cr-2Mo-6W-5Co alloy using CaO crucible were studied.

研究了使用 Ca O坩埚真空感应熔炼 Ni- 6 Cr- 2 Mo- 6 W- 5 Co合金过程中碳与氧的变化及加碳和铝的脱氧作用。

Deoxidizing Law of Aluminum-Containing Steel During VIM;

真空感应熔炼含铝钢的脱氧规律

Denitrogenation and Desulphurization in VIM for Ni-base Superalloy Refining;

镍基高温合金真空感应熔炼脱氮与脱硫

Deoxidation and Denitrogenation during VIM Refining Ni-Base Superalloy;

镍基高温合金的真空感应熔炼脱氧和脱氮

The influences of carbon and aluminium on deoxidation during vacuum induction melting(VIM) in CaO crucible for Ni-base superalloy is studied.

本研究在现有条件下,确定了氧在镍基高温合金中存在主要形态为氧化铝夹杂,根据得到的实验数据分析和计算,初步研究了真空感应熔炼条件下碳和铝对镍基高温合金的脱氧机理,实验中氧含量最低为0。

Investigates the denitrogenation behavior of Ni-base superalloy during vacuum induction melting(VIM) and how Ti interacts with Ni in the Ni-base superalloy.

研究了真空感应熔炼镍基高温合金过程中的脱氮工艺并初步分析了镍基高温合金中钛对氮的相互作用,近似地计算出其相互作用系数。

The Dissolution of Oxygen in Ti6Al4V Melt during Vacuum Melting;

Ti-6Al-4V合金真空熔炼过程中氧元素的溶解

A self-made vacuum melting and argon shield continuous unidirectional solidification equipment was used to produce copper tube with continuous columnar structure.

采用自行研制的真空熔炼、氩气保护连续定向凝固设备制备出具有连续柱状晶组织的铜管铸坯,分析了铜管铸坯生产中熔体温度、连铸速度、冷却水量,结晶器等对其的影响。

In the process of vacuum melting AZ31 magnesium alloy, Nb powder and Mg-Nd intermediate alloy were added, respectively.

研究真空条件下,在重熔AZ31镁合金的过程中添加Mg-Nd中间合金,分析真空熔炼合金中夹杂物的成分及Nd的吸收率,观察其微观组织,对析出相进行分析,与不含Nd的AZ31进行比较,并着重讨论了提高其力学性能的途径。

Arc Discharge in the Vacuum Induction Melting and its A voidance

真空感应熔炼中弧光放电及解决办法

VIM Refining Extra-Low Oxygen Steel using CaO Crucible

用氧化钙坩埚真空感应熔炼超低氧钢

Influence of Oxygen Contamination from Crucible Material on Deep Deoxidation of Molten Steel during Vacuum Induction Melting;

真空感应熔炼过程炉衬供氧对钢液深脱氧影响

Technological research on 32CrMnSi2Ni6MoV with low gas content by vacuum induction melting

真空感应熔炼低气体含量32CrMnSi2Ni6MoV的工艺研究

Study on Desulphurization Process in Vacuum Induction Melting GH4169 Alloy for Turbine Disk

涡轮盘用GH4169合金真空感应熔炼脱硫工艺研究

Deoxidizing Dynamics of Refining Extra-Low Oxygen Steel during VIM in CaO Crucible

用氧化钙坩埚真空感应熔炼超低氧钢的脱氧动力学

Study on Vacuum Induction Melting and Jet Casting Process of Pt-10Pd-20Ag Alloy

Pt-10Pd-20Ag合金的真空感应熔炼和喷铸成形工艺的研究

Smelting of high nitrogen martensitic stainless steels by vacuum induction furnace under near normal protective atmosphere

真空感应炉近常压气氛保护熔炼高氮马氏体不锈钢

Application of Computer to Vacuum Arc Remelting(VAR) of Rare Metals

微机在稀有金属真空电弧熔炼中的应用

Cen-tral lron & Steel Research Institute has successfully developed the cold crucible vacu-um induction levitation melting device and techniques with the capacity of 2.5 kg.

钢铁研究总院成功地开发了2．5kg级冷坩埚真空感应悬浮熔炼技术和装备。

medium frequency coreless induction melting furnace

中频无心感应熔炼炉

frequency crucible induction melting furnace

频率坩埚感应熔炼炉

mains frequency coreless induction melting furnace

工频无心感应熔炼炉

VACUUM METALLURGY FACILITY(Ⅲ)-VACUUM ARC FURNANCE

真空冶金装置(三)一真空电弧熔炼

Vacuum Melting Process for 5A90 Alminum Lithium Alloy

5A90铝锂合金真空熔炼工艺研究

Simulation of Temperature Field in Vacuum Non-consumed Melting and Evaluation of Melting Effect

真空非自耗电弧熔炼温度场模拟及熔炼效果评估

Study on Smelting Al-Mn-Si Alloy in Induction Furnace

Al-Mn-Si合金的感应炉熔炼研究

Thermoelectric calculation and technological analysis during melting in vacuum consumable electro-arc furnace

真空自耗电弧炉熔炼时的电热计算与技术分析