基本释义:

针阀，簧片阀

网络释义

1)reed valve,针阀，簧片阀

2)needle valve spring,针阀弹簧

3)Spring valve plate,弹簧阀片

4)reed valve,簧片阀

5)reed valve,片簧阀

6)multiple leaf valve,多簧片阀

用法和例句

The reed valve modeling and the short circuit loss during scavenging process were also considered at the modeling process.

建模中考虑了簧片阀的建模,同时考虑了扫气过程中的短路损失,进行了空燃比的计算。

Research for Working Characteristics of EQ1141G Automobile Air Compressor Reed Valve;

EQ1141G型汽车空压机簧片阀工作特性的研究

In succession, the author educed movement differential equation of reed valve plate from differential element of the plate according to theory of elastic plate libration.

接着本文根据弹性薄板振动理论,由薄板的微元体导出簧片阀阀片的运动微分方程。

All this lay a better foundation for design and application of reed valve.

为高速复杂形状簧片阀的设计和应用奠定了一些基础。

Abstract: Reed valve, high-speed and complicated in shape, is one of key parts in microengine.

文摘:高速复杂形状簧片阀是微型发动机关键零件之一。

Reed valve, high-speed and complicated in shape, is one of key parts in microengine.

高速复杂形状簧片阀是微型发动机关键零件之一。

Study on Superposition Throttle-Slice and Opening Valve Pressure of Hydro-pneumatic Spring

油气弹簧多片叠加节流阀片与开阀压力研究

Influence of Elastic Modulus toValves Designing Parameters of Hydro-Pneumatic Spring

阀片弹性模量对油气弹簧阀系设计参数的影响

Study on Adjust Shim Thickness and Affection to Throttle Opening Velocity of Hydro-pneumatic Spring

油气弹簧调整垫片厚度及对开阀速度影响

Design Methods of Superposition Throttle Slices and Influence on Throttle Aperture of Hydro-Pneumatic Spring

油气弹簧叠加阀片设计方法及对节流缝隙影响

Experiment and analysis of large deflection of throttle slice of hydro-pneumatic spring

油气弹簧环形节流阀片大挠曲变形分析与试验

Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.

拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。

The lower stem is encased in a spring which forces the stem away from the seat when the valve is opened.

下阀杆包裹在一个弹簧内部，当阀门开启时，弹簧迫使阀杆离开阀座。

Remove valve spring and retainer.

拆卸阀弹簧和扣件。

hydraulic relay valve return spring

液压式继动阀回动弹簧

spring-loaded regulator

弹簧型自力式调节阀

One of several metal strips forming a leaf spring.

簧片构成片簧的几个金属片中的一个

The relief valve spring will be free inside the body at this point.

这时安全阀弹簧将在阀体自由活动。

"There are holes under the reed valve that connect to the engine carburetor. When the piston is moving up, a partial vacuum is produced in the sealed crankcase.

在片簧阀的下面有孔道与化油器相连。当活塞向上运行时,就会在密封的曲轴箱里产生部分真空。