基本释义:

正负，加减，调整

网络释义

1)plusminus,正负，加减，调整

2)positive-negative justification,正负码速调整

3)positive/ zero/ negative justification,正/零/负码速调整

4)positive/zero/negative justification,正/0/负码速调整

5)load increase and decrease,加减负荷

6)load regulation,负载调整

用法和例句

Considering the low rate characteristic of scatter channel and the need of engineering,positive/zero/negative justification is used in asynchronous multiplexing.

主要提出了低速率散射链路异步复接的关键参数选取方法,结合散射链路低速率特性和工程应用需求,在异步复接中采用正/0/负码速调整技术,通过公式计算推导出帧结构、码速调整和码速时钟恢复等关键参数的工作范围,经试验测试验证了关键参数选取的正确性,为工程实现异步复接提供了理论设计依据,最后提出低速异步复接在散射链路中的重要意义。

The proposed system has the characteristic feature that on the basis of retaining the existing hydraulic regulating system a "power-frequency" electronic regulator can be employed to conduct steam turbine automatic speed boosting and automatic load increase and decrease.

该系统的特点是在保留了原液压调节系统的基础上,用“功率—频率”电调节器实现汽轮机自动升速和自动加减负荷。

Analysis and improvement of load regulation in one-cycle control;

单周期控制技术的负载调整性能分析与改进

In the production line of high - frequency welded tube, the main causes of directly influencing the production efficiency and the rate of finished products are high - frequency heating equipment and the load regulation.

文章以高频焊管流水生产线的负载调整为切入点,从管坯的开口角的大小、阻抗器的尺寸及放置位置、感应器的技术要求和其他相关因素4个方面阐述了对负载调整的影响。

The Principle of the Bit Recovery of the Modelling Method for Positive/Zero/Negative Justification

模型法正/零/负码速调整的码速恢复原理

Design on a Novel Wireless Positive/Zero/Negative Justification

一种新型无线信道正零负码速调整设计

Zero adjustment function,forward adjust is forward biased,reverse adjust is reverse biased.

零点调整功能，顺时针调整可以偏负，逆时针调整可以偏正。

Design and realization of Positive justification based on FPGA

基于FPGA的正码速调整的设计与实现

The governor must have provision for adjusting speed (generator frequency) and speed droop (no load to full load).

调速器必须具备转速调整（发电机频率）和降速降调整（零负荷到满负荷）功能。

an integer or a fraction.

正整数负整数正分数负分数和零。

The governor must have provision for adjusting speed( generator frequency) and speed droop( no load to full load).

调速器必须具备转速调整（电机频率）降速降调整（负荷到满负荷）能。

Please drag these messages into the correct order for decoding

请按正确的解码顺序调整这些邮件

With zero setting on/ off, feeder and slotter can be quick. set to zero, easy operation.

配合归零开关操作，可迅速使送纸部及开槽部自动归零，方便调整。

The Conrergence in Adjusting Process of Index in Quality Control for Correction

零件校正质量控制中指数调整过程的收敛性

T he base number is an odd number when,The number great Than a number that cosist of the half of the largest digit is the negative,Otherwise the number is posit ive or zero.

当基数是奇数的时候,比顶码的一半数码组成数大的数是负数,否则是正数或者零。

The worker is timing the speed of the machine.

这名工人正在调整机器的速度。

The response rate speed governor to the given power signal directly affects the load regulating process of generatorset.

调速器对功率给定信号响应速度，直接影响著机组负荷的调整过程。

To adjust(an instrument or a device) to zero value.

把…调到零点调整（仪器或设备）到零点

Remedy: Check zero point correction of the star and re-adjust if necessary.

方法：检查零点位置是否正确，并且需要时，加以调整。

Global sex research is patchy and incomplete.

全球性行为调查零零碎碎，并不完整。

HS Code 3809.10 (finishing agents)

协调制度编码 3809．10 （整理剂）

Click on the plus and minus signs to adjust the proportions between extracts in your new fragrance.

点击正负标志调整在你的新香水中提取物的比例。