基本释义:

支承面，承力面

网络释义

1)carrying plane,支承面，承力面

2)thrust supporting face,推力支承面

3)bearing pressre bearing stress,支承面压力

4)bearing thrust face,支承推力面

5)bearing surface,轴承支承面

6)supporting surface,支承面

用法和例句

This paper introduces how to make inspection tools to measure directly the run out of supporting surface of high strength bolt to screw thread center,and thus solves the difficulty puzzled for a long time--there is no way to inspect directly if the bolt supporting surface to screw thread center meet the requirements of shape and location.

介绍了如何制作检具来直接测量柴油发动机高强度螺栓支承面对螺纹中心的跳动值 ,从而解决了困扰已久的难题 :即 ,在没有检具的情况下 ,无法直接检测螺栓支承面对螺纹中心是否达到形状、位置要求。

Causes and preventive measures for soledering cracks on bearing surface of adapter

承载鞍支承面焊补裂纹的形成原因及防止措施

An airplane propeller mounted in front of the supporting surfaces.

牵引螺旋桨安装在支承面前面的飞机螺旋桨

Comparison experiment on the loading capacity of the branch pile and the pile with constant section

支盘桩与等截面桩承载性能对比试验

Supporting Technology of Mining Roadway in Abutment Pressure Zone of 2304 Mining Face in Sihe Colliery

寺河矿2304工作面巷道支承压力区支护技术

Observation and Research of Bearing Stress of Advance Support of Fully Mechanized Coal Mining Face

综采工作面超前支护支承压力观测与分析

a fulcrum bearing

支点承座, 刀口承

( The door may be supported in a horizontal plane during the pull force test).

（拉力试验期间，门可以在水平面内进行支承。

The door may be supported in a horizontal plane during the pull force measurement test.

在拉力测量期间，可以在水平面内对门进行支承。

The bents supporting the four continuous 工 beam plate girders have a cross section shaped like a box.

构架支承着四片工字型板梁，构架的截面为箱型。

Study on Abutment Pressure Distribution and Surrounding Rock Control in Fully Mechanized Sub Level Caving Working Face of Deep Mine;

深井综放工作面支承压力分布及围岩控制研究

The Bending of Isotropic Shellow Spherical Shell Supported by Corner Colums of Panels with Uniform Thickness;

角点支承的等厚度各向同性球面扁壳的弯曲

Wind Induced Response Analysis of Triangle Cable Network for Supporting FAST Reflector;

FAST反射面支承结构三角形索网风振响应分析

The Study of Detective Technics for Uneven Supporting Cement Concrete Pavement;

不均匀支承水泥混凝土路面板探测技术研究

Study on Plane Deformation in Curved Girder Bridge and Positioning of Its Bearing System;

曲线梁桥平面变形特性和支承布置的研究

Theoretical and Experimental Research on Supporting Structure of FAST Refelector;

FAST主动反射面支承结构理论与试验研究

Structure Design and Experimental Study on Ultrasonic Levitation Bearing Which Support with Concave Cylindrical Surface

凹柱面支撑超声波悬浮轴承设计与实验研究

THE FREE VIBRATION ANALYSIS OF A BAEM PARTLY IMMERSED IN A FLUID ON COUPLED ELASTIC FOUNDATION

部分水下弹性支承等截面梁柱的自由振动分析

Study on the Observation and Distribution of Abutment Pressure in Large Mining Height

大采高工作面的支承压力分布与观测技术研究