基本释义:

制槽楔机，打槽楔机

网络释义

1)wedger,制槽楔机，打槽楔机

2)wedge inserting machine,槽楔插入机

3)armature wedger,嵌电枢槽楔机，制造电枢槽楔机

4)insertion machine,嵌线机，下线器;打槽楔机;插入机

5)slot wedge,槽楔

6)key driving machine,打楔机

用法和例句

The analysis on heat treatment management and properties of slot wedge in the generator rotor;

发电机转子上槽楔的热处理组织和性能分析

For improveing die design efficiency and quality like slot wedge in micro motor,reducing the labor input,it needs to develop the CAD of die for slot wedge.

为了提高微电机槽楔这类零件模具的设计效率和质量,降低设计人员的劳动强度,需要开发相应的模具CAD系统。

Only changing the nonmagnetic slot wedge,was the pole arc width of one pole changed in this method,and the interval between two adjacent poles was the same.

为了研究实心转子永磁同步电动机的削弱措施,结合永磁电机永磁体极弧系数和永磁体不对称放置的方法,提出了一种仅改变实心转子非磁性槽楔的齿槽转矩削弱方法。

Study on acoustic detection of stator slot wedges in large generators

大型发电机定子槽楔松动的声检测研究

Elasto-plastic Analysis of the Rotor and Wedges of 1000MW Supercritical Turbogenerator

超临界1000MW汽轮发电机转子和槽楔的弹塑性分析

Development of Pultruded Magnetic Slot Wedge Based on Glass Fibre Reinforced Unsaturated Polyester Resin

玻璃纤维增强聚酯树脂引拔磁性槽楔的研制

Application of Magnetic Slot Wedge in Y2 Series High Voltage Asynchronous Motor

磁性槽楔在Y2系列高压电动机中的应用

Generator Stator Wedge Replacement and Analysis of Core Corona Corrosion Treatment

发电机定子槽楔更换及铁芯电晕腐蚀处理浅析

A detecting system of stator wedges in large generator based on DSP

基于DSP的大型发电机槽楔松动检测系统

The loosening and dropping out of slot wedges may damage insulation of rotor and stator to cause stator insulation breakthrough.

槽楔松动脱落可能划伤转子绝缘和定子绝缘,造成定子线棒主绝缘击穿。

Study on Effect of Symmetry of Wedge-shaped Cutting Hole Angle on Cut Blasting

楔形掏槽炮孔角度对称性对掏槽效果影响研究

Thin taper keys and their corresponding keyways

GB/T16922-1997薄型楔键及其键槽

Taper keys--Cross section dimensions of keys and keyways

GB/T1563-1979楔键键和键槽的剖面尺寸

A wedge or key that fits into a groove to make a joint.

加强肋作为连接物填入槽内的楔形物或舌状物

Preliminary Study on Forming Laws of Cuspidal Splitter Split-extruding Rectangular Slot

尖头劈楔劈挤矩形槽成形规律初步研究

Popularization and Application of Deep-hole Blasting Technique in Bottom Compound-term Wedge Cutting

底部复式楔形掏槽中深孔爆破技术的推广应用

Design of Combination of Smooth Blasting and Double-wedge Cut for Roadway Excavation

双楔形掏槽方法和光面爆破技术的综合设计

The loosening holes outside the plough cut are also drilled at an angle which improves the breakage possibility.

在楔形掏槽眼外侧的扩槽眼也要有角度以改善爆破效果。

The Norwegian cut can provide more dependable advance per round than the plough cut.

挪威掏槽与楔形掏槽相比，可以提供更可靠的每次爆破的进度。

The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.

斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目的。

a screwdriver with a flat wedge-shaped tip that fits into a slot in the head of a screw.

有可以插入螺丝头的狭槽的楔形尖端的螺丝起子。