基本释义:

轴对中规

网络释义

1)shaft alignment gauge,轴对中规

2)Rotor alignment,轴系对中

3)alignment of shafting,轴线对中

4)crank shaft alignment,曲轴对中

5)shaft alignment,轴对中

6)alignment of a hole,(轴)孔对中

用法和例句

The design of a laser shaft alignment based on double LD-PSD is proposed in this paper.

建立了轴对中数学模型;设计了硬件电路。

The Research and Developing on Automatic Measurement System for Aligning the Shafts of Turbo-Generator Set;

RQS汽轮机轴系对中自动检测系统的研究与开发

Research on the Dynamics of Misaligned Rotor-bearing System with a Flexible Laminated Membrane Coupling;

膜片联轴器耦合的不对中转子—轴承系统动力学研究

EXPERIMENT RESEARCH ON MISALIGNMENT AND FREQUENCY-LOCKING TROUBLE OF ROTOR-COUPLING-BEARING-LSOLATOR SYSTEM

转子-联轴器-轴承-隔振器系统不对中及锁频故障实验研究

Research on the Dynamics of Misaligned Rotor-bearing System with Rolling Bearing and Journal Bearing;

滚动轴承和滑动轴承联合作用下不对中转子—轴承系统的动力学研究

It covers geometrically 86% of the 4t solid angle and has very low detection thresholds.

整个探测器系统轴向对称排列，工作在真空中。

Propagation Laws of Wigner Distribution Function Through Nonsymmetrical Systems;

非轴对称系统中维格纳分布函数的传输规律

Identification of Mis-alignment Faults about Rotor-bearing System on Mallat

基于Mallat算法的转子-轴承系统不对中故障辨识

Dynamic behavior of a rotor-misaligned spline coupling system

转子-不对中花键联轴器系统动力学特性研究

Study on Adjusting of Torsional Vibration in Compressor Shafting by Coupling

联轴器对压缩机轴系扭振的调节研究

One of three axes in a three - dimensional Cartesian coordinate system.

x轴三维直角坐标系中的三轴之一

Marine intermediate shafting sliding bearing

GB/T14364-1993船舶轴系滑动式中间轴承

Study on Shafting Alignment of 57300DWT Bulk Carrier;

57300DWT散货船轴系校中研究

Meshing force model of misaligned gear coupling and its influence on a rotor system

齿式联轴器不对中啮合力模型及其对转子系统动力学特性影响

Axial limitation of the slevve movement by means of a patented thrust system located in the center line of each gearing.

采用位于每套齿轮中心线的专利推力系统对轴套的位移进行轴向限制。

Effect of bearing stiffness on ship shafting system vibration performance

轴承刚度对船舶轴系振动特性的影响研究

Influences of spline coupling on stability of rotor-bearing system

花键联轴器对转子-轴承系统稳定性影响研究

Rotationally Symmetrical Subgridding Algorithm in FDTD and Reflectance at the Subgridding Region;

轴对称柱坐标系中的FDTD亚网格技术及粗细网格边界反射特性研究

Thickness Effect on Stress Concentration Factors of Lugs under Axial Tension Loads

轴向拉伸载荷作用下耳片厚度对应力集中系数的影响