基本释义:

轴封水系统

网络释义

1)seal water system,轴封水系统

2)gland seal system,轴封系统

3)sealing system in axles,轴密封系统

4)water sealing system,水封式系统

5)water seal arrangement,水封阀系统

6)sealing water system,密封水系统

用法和例句

Improvement of the accuracy and reliability of pressure signals in shaft gland seal system of ultra supercritical unit

超超临界机组轴封系统压力信号准确性和可靠性的提高

A universal model for calculation of gland seal system has been deduced using matrix method.

应用矩阵推导出了轴封系统的通用计算模型。

Directing against the problem of water content exceeding standard limit in turbine oil for two 300 MW units in the first-phase project of Huayang Power Generating Co Ltd,the gland seal system,oil filtering system,and oil returning system from bearing etc.

针对华阳发电有限责任公司1期2台300 MW机组汽轮机油水分严重超标的问题,对汽轮机的轴封系统、滤油系统、轴承回油系统等进行检查分析,找出了问题所在。

The water seal arrangement for flare gas recovery and its application in Yangzi Petrochemical Co.

介绍了扬子石化公司火炬气回收装置的水封阀系统,分别叙述了各系统的投用情况,对存在的问题进行了分析,并提出改进建议。

Effects of sealing water system on the vacuum of steam pump and improvements;

汽动泵密封水系统对真空影响的原因分析及改进

Through analyzing, it is believe that the air leakage from sealing water system of feed water pump leads to the problem.

在机组系统严密性试验合格的前提下,经多次观察,发现是给水泵密封水系统漏空气造成的。

To solve the long-standing problem of poor vacuum in the low backpressure condenser of a 600 MW Unit in Huaneng Shantou Power Plant,field testing and analysis were made,and the air leakage into the sealing water system of turbine-driven feedwater pump was deemed to be the reason of the problem.

华能汕头电厂600MW机组低背压凝汽器真空一直很差,通过现场试验和分析,确定影响凝汽器真空的原因是汽动给水泵密封水系统漏入了空气。

Renovation of Shaft Seal System of 220MW Turbo-generator Set

220MW汽轮发电机组轴封系统改造

Analysis of structure and operation of shaft gland seal system in 600 MW unit

660MW机组轴封系统结构与运行分析

Improvement of the accuracy and reliability of pressure signals in shaft gland seal system of ultra supercritical unit

超超临界机组轴封系统压力信号准确性和可靠性的提高

Calculation of Natural Frequency of Torsional Vibrations for an Enclosed Disc Shaft System

封闭盘轴系统扭转振动固有频率的计算

Study on Modeling and Behaviors of Rotor-Bearing-Seal System Dynamics;

转子—轴承—密封系统动力学建模及其特性研究

Numerical Study on Nonlinear Aerodynamic Excitation of Rotor-Bearing-Sealing Systems;

转子—轴承—密封系统非线性气流激振数值研究

Nonlinear Vibration and Bifurcation Analysis for Rotor-Bearing-Seal Systems;

转子—轴承—密封系统的非线性振动与分岔

Research and Development on Three-Dimensional CAD of Sealed Deep Groove Ball Bearing;

密封深沟球轴承三维CAD系统研究与开发

Exploitation and Design of Water Lubricated Dynamic Pressurize Bearings Test-bed Control System;

水润滑动密封轴承试验台控制系统的开发设计

Research and Development of the Experiment System for Water Lubricated Dynamic Pressurize Bearings;

水润滑动密封轴承性能实验系统的研究与开发

Research on the Nonlinear Dynamic Characteristics of a Rotor-Bearing-Seal System;

转子—轴承—密封系统非线性动力学特性的研究

Research on the Nonlinear Vibration of a Rotor-bearing-seal Coupling System

转子-轴承-密封耦合系统的非线性振动特性研究

"Incorporates the same "construction features"as the Series 9100 for bearing design, shaft strength, mechanical seal system and cap/cable system"

轴承设计,轴长,机械密封系统和外罩／电缆系统等部件于9100系列泵完全相同。

Numerical and Experimental Analysis of Nonlinear Dynamics of Rotor-bearing-seal System

转子-轴承-密封系统非线性动力学理论和试验研究

Failure Analysis and Quality Assurance Measures of TBM Main Bearing Sealing System

掘进机主轴承密封系统故障分析及质量保证措施

Effect of 200 MW generator rotor journal abrasion on oil sealing system and its handling

200MW发电机转子轴颈磨损对密封油系统的影响及处理方法

Reform of Mechanical Seal and Liquid Seal System in Agitator A310

搅拌器A301机械密封及封液系统改造

Design of GFP encapsulation and de-encapsulation in EoS system

EoS系统中GFP封装与解封装的设计