基本释义:

锥形喷嘴

网络释义

1)conical nozzle,锥形喷嘴

2)spiral cone jet nozzle,旋转锥形喷嘴

3)full cone nozzle,密实锥形喷嘴

4)nozzle cone,喷嘴锥头

5)nozzle hole cone,喷嘴锥体

6)taper nozzle,锥形轴针式喷油嘴

用法和例句

A theoretical calculation method for flow rate coefficient and hydraulic parameters of conical nozzle;

锥形喷嘴流量系数及水力参数的理论计算方法

Calculation and experimental comparison for conical nozzles in submerged cavitating water jet;

淹没水射流锥形喷嘴的计算分析与试验比较

On the other hand,simulate by the Fluent software the jetting status of the double orbits water jet spiral nozzle jetting under 40 MPa pressure-inlet,then got the best working status of the spiral cone jet nozzle.

对Fluent流体分析软件做了简要概述,并对旋转喷嘴的结构及其特性做了技术性分析;另外还用Fluent软件分别对双头不同导程的2种旋转喷头在40 MPa进口压力条件下的喷射状态进行分析,从而得出旋转锥形喷嘴的最佳工作状态。

steam atomizing conical jet

蒸汽雾化圆锥形喷嘴

The Influence of Conical Nozzle Geometric Parameters on the Property of Efflux Flow Field

圆锥形喷嘴内部结构参数对射流流场的影响

Numerical simulation for the influence of structure parameters of ultra-high pressure taper nozzle on the micro-fluidization

超高压锥形喷嘴结构参数对微射流影响的数值模拟

Research on deposition track and its coupling in spray forming billet with two scanning nozzles

锭坯双喷嘴扫描喷射成形雾化锥沉积轨迹及其耦合研究

The Influence of Conical Nozzle Geometric Parameters on the Property of Zfflux Flow Field

锥直形喷嘴内部结构参数对射流流场影响的数值模拟

Numerical study on spray angle of the dual-orifice pressure-swirl atomizer

双路离心式喷嘴雾化锥角的数值研究

Experimental and Numerical Investigation on Sprays of Hollow-Cone Pressure Nozzle;

空心圆锥雾化喷嘴喷雾实验与数值研究

cylindrical throat Venturi nozzle

圆筒形喉部文丘里喷嘴

The Simulation of Heat Transfer of the Rod-billet during Two-nozzle Spray Forming Process

双喷嘴喷射成形柱状坯传热过程模拟

Modeling of Shape Evolution of Rod Billet in Twin-nozzle Spray Forming

双喷嘴喷射成形柱状坯生长过程模拟

a cone-shaped device held to the mouth to intensify and direct the human voice.

放在嘴边扩大和传送声音的锥形装置。

ISA 1932 nozzle

ISA 1932喷嘴

Research on Atomization Patterns for Cracks Hole Style Fuel Injection Nozzles

缝隙孔式喷油嘴偶件燃油喷注雾化形态的研究

A Numerical Study on the Process of Cavitation in a Real Diesel Nozzle

柴油机喷油嘴喷孔中空泡形成过程的数值模拟

The Application of the FLUENT Software in the Proccess of Designing Flat Fan Nozzles;

FLUENT软件在扁平扇形喷嘴设计中的应用

Research on new style anti-impacting fan-shaped nozzle

新型抗冲击磨损扇形喷嘴的设计研究

Mechanical Capability Study on Conical Nozzle of Rocket Engine by ANSYS

火箭发动机锥形喷管ANSYS力学性能分析研究

aperture atomizer

喷孔式喷油嘴喷雾器