基本释义:

最小弯曲半径

网络释义

1)minimum bending radius,最小弯曲半径

2)minimum relative bending radius,最小相对弯曲半径

3)minimum bending radius of cables,电缆的最小弯曲半径

4)small bending radius,小弯曲半径

5)small radius bending,小半径弯曲

6)small bend radius tube,小弯曲半径管

用法和例句

Mathematic calculation approach of minimum bending radius of mandrel based on Matlab

基于Matlab的芯轴最小弯曲半径计算

At last, the formulation of allowable minimum bending radius limiting .

推导出限制弯管壁厚变化量的许用最小弯曲半径公式,经试验验证具有一定的实用价值。

In NC rotary-draw bending of thin-walled tube the value of minimum bending radius which keeps the mandrel balls from interference and collision is confined by structure characteristic and joint fashion.

在薄壁管的NC绕弯加工中,最小弯曲半径由芯轴的结构特点和连接方式确定,弯曲半径的值决定了芯轴块间是否发生碰撞干涉。

According to that above mentioned,the calculating formula of minimum relative bending radius limited by tube extending rate and extending intensity is deduced.

通过实验,分析了管材弯曲外侧的切向和管壁厚方向的应力应变状态,建立了相应的平均应变计算公式,进一步推导出由管材延伸率和拉伸强度所约束的最小相对弯曲半径计算公式。

A few methods,which approximately calculate minimum relative bending radius,are put forward by analyzing the stress and strain as plate bending deformation in this paper.

板料弯曲时的极限变形程度可用最小相对弯曲半径来描述。

Experimental study on role of mandrel in thin-walled tube NC bending process with small bending radius;

薄壁管小弯曲半径数控绕弯成形芯模效用的实验研究

Experimental study on thinning of thin-walled tube NC bending process with small bending radius;

薄壁管小弯曲半径数控弯曲壁厚减薄实验研究

Aluminum alloy thin-walled tubes with small bending radius are one of key components widely used in aviation, aerospace high-technology industries.

铝合金小弯曲半径薄壁弯管是在航空、航天等高技术领域获得量大面广应用的关键零件之一，但其数控弯曲成形是一个多因素耦合作用下的复杂物理过程，是薄壁管成形领域研究的难点与热点之一。

Mathematic calculation approach of minimum bending radius of mandrel based on Matlab

基于Matlab的芯轴最小弯曲半径计算

The bending radius should not less than25 times of cable diameter.

电缆弯曲半径：不小于电缆外径的25倍。

This opens up the radius of the turn for you so the turn is less tight.

这会加大你过弯的半径，相对减小弯道的曲度。

Excellent pliability，flexibility and elasticity and suitable for special occasions requiring small bending radius.

本产品具有极好的弯曲、柔软性和弹性，可用于弯曲半径较小的场合。

Experimental Research on NC Bending with Small Bending Radius of Aluminum Alloy Thin-Walled Tube;

铝合金薄壁管小弯曲半径数控弯曲成形的实验研究

The pouring construction technology of small radius flat curve continuous steel bridge cantilever

小半径平弯曲线连续刚构桥悬臂浇筑施工技术

Study on the Minimum Value of Curve Radius in Shield Construction;

盾构法施工最小曲线半径取值的研究

The Research of Lowest Radius to High-Speed Railways with Ballastless Tracks;

无碴轨道高速铁路最小曲线半径研究

The Calculation of the Minimal Turning Radius and the Setting of the Fire Road Width

消防车道最小转弯半径以及通道宽度的计算

The winding trail caused them to lose their orientation.

弯弯曲曲的小径使他们迷失方向。

A path weaved through the valleys.

一条小径弯弯曲曲通过山谷。

Research on Method to Confirm Minimum Radius of Circular Curve of Mountain Expressway;

山区高速公路圆曲线最小半径确定方法的研究

Study on Curve Radius Standard for Linear Metro

直线电机轮轨交通线路最小平曲线半径研究

The beam bends to a circular profile of radius R.

梁弯曲成半径为R的园形形状。

Study on the Criteria for Minimum Radius of Curve and the Transition Curve for 160km/h Railway Track

时速160公里铁路最小曲线半径与缓和曲线设计标准的研究

HEAVY DUTY AUTOMOTIVE STEERING, with shorter turning radius.

重型自动方向盘：较小的转弯半径。

MANEUVERABILITY. Short turning radius, power steering.

灵活性：较小的转弯半径，动力转向。

Thin-walled Tube with Small Radius and Internal Medium Pressure Forming Technique

薄壁小半径弯管与中压内胀成形工艺