基本释义:

形封闭凸轮机构

网络释义

1)positive-drive (or form-closed) cam mechanism,形封闭凸轮机构

2)force-drive (or force-closed) cam mechanism,力封闭型凸轮机构

3)Form-closed mechanism,形封闭型机构

4)plate cam mechanism,盘形凸轮机构

5)Cam mechanism,凸轮机构

6)cam-drive mechanism,凸轮机构

用法和例句

For plate cam mechanism with flat-faced follower, this paper derived the formula and the curvature expressions of cam convex profile curve, which can be applied to both translating follower and to oscillating follower.

针对平底从动件盘形凸轮机构,导出了同时适用于直动和摆动从动件的凸轮廓线综合公式及凸轮实廓外凸的条件式。

And then expounded that these equations are the general synthetic equations suitable at the same time for plate cam mechanisms with straight moving or oscillating followers.

导出了从动件作平面复杂运动的凸轮机构的凸轮廓线方程和压力角表达式;进而,阐明了本方程是同时适用于移动和摆动从动件盘形凸轮机构的通用综合方程。

The motion simulation and research of cam mechanism based on UG;

基于UG的凸轮机构运动仿真研究

The research on the kinematic characteristics of follower’s parabolic motion in cam mechanism;

凸轮机构推杆的等加速等减速运动规律的研究

Parametric control of speed fluctuation minimization in cam mechanism;

凸轮机构速度波动最小化参数控制

According to the requirement of the technology,a new type of reciprocating pump with cam-drive mechanism resulting in the constant flow was designed.

针对注聚合物驱油的工艺要求 ,研制了新型凸轮机构恒流量往复泵。

The special cam-drive mechanism which has replaced the traditional crack-connecting rod mechanism is used as the power end of the new constant discharge pump, which has greatly changed the performance of the reciprocating pump.

从柱塞运动规律、动力特性、吸入与排出性能以及泵阀工作特性等方面,对凸轮机构恒流量往复泵与曲柄连杆机构往复泵的性能进行了对比分析,从而得出了这两种往复泵存在的优点与不足,为在不同场合进一步使用好两种往复泵提供一些理论指导。

Motion analysis of disc cam mechanism with rouer follower

滚子从动件盘形凸轮机构的运动分析

Research on Oscillating and Translating Flat-bottom Follower Disc CamM echanism

摆动与直动平底从动件盘形凸轮机构

The Considering to the Design of the Disk Cam with Direct-Moving-roller Follower;

滚子的直动从动件盘形凸轮机构设计

Study on disk cam mechanism with arc bottomed translation follower

弧底直动从动件盘形凸轮机构的研究

Design for a new type of cam mechanisms-disk cam mechanism with concave arc follower(一)

一种新型凸轮机构——凹圆弧底从动件盘形凸轮机构的设计(一)

DETERMING THE MINIMAL RADIUS OF BASE CIRCLE OF A CAM WITH TRANSLETINGA POINT FOLLOWER ACCORING TO THE ALLOWABLE PRESSURE ANGLE[α]

按许用压力角(α)确定直动从动件盘形凸轮机构凸轮最小基圆半径

The Fix Method of Basic Size of Cam in the Disk Cam Mechanism with Straight Follower

直动从动件盘形凸轮机构中凸轮的基本尺寸确定方法

A Seeking Method For Determination of the Optimum Dimeutions of Disc Mechanisms with Swing Roller Followers

滚子摆动从动杆盘形凸轮机构最佳尺寸的确定

Optimization Design Diagrams for Disk Cam Mechanisms with Pivoted Roll er Follower

滚子摆动从动件盘形凸轮机构优化设计线图

The Analysis and Calculation for Design Site Error of Plate Cam Mechanism

盘形凸轮机构设计位置误差分析与计算

Efficiency calculation model of disc cam mechanism with translating flat-bottomed follower

直动平底从动件盘形凸轮机构效率计算模型

A Semi-Analytical Method for Solving Velocity and Acceleration of Disc Cam Methanisims

求盘形凸轮机构速度及加速度的半解析法

Lubrication and Parameters of Cam

平底推杆盘形凸轮机构的润滑状态与参数

Fundamental Dimensions of Disc Cams with Translating Roller Followers

直动滚子推杆盘形凸轮机构的基本尺寸

Synthetical research on disc cam mechanism with follower in planar motion

平面运动从动件盘形凸轮机构及其综合研究

Using Differential Method to Get the Best Design Parameters of a Disc Cam Mechanism With Oscillating Follower

微分法求解摆动从动件盘形凸轮机构最佳参数

A General Algorithm to Determine the Basic Sizes of Disk Cam Mechanisms with Roller Follower

滚子从动件盘形凸轮机构基本尺寸的通用算法

The Optimization Design of Plate Cam Mechanism with Roller Follower;

偏置直动滚子从动件盘形凸轮机构的优化设计