基本释义:

形位公差

网络释义

1)Geometric tolerance,形位公差

2)shape and position tolerance,形位公差

3)Geometrical tolerance,形位公差

4)Form and position tolerance,形位公差

5)shape and location tolerance,形位公差

6)tolerance of form and position,形位公差

用法和例句

Optimal tolerance allocation for composite dimensional and geometric tolerances;

尺寸公差与形位公差混合优化分配

Research on Key Techniques for Concurrent Design of Product Conceptual Structure and Geometric Tolerance;

产品概念结构与形位公差并行设计关键技术研究

Development of a geometric tolerance code tagging system based on the AutoCAD

基于AutoCAD的形位公差代号标注系统的开发

Brief analysis of how to reasonably select shape and position tolerances;

简析形位公差选择的合理性

Influence of shape and position tolerance of dryers and rolls for paper machines

缸辊形位公差对纸机的影响

In this article,according to the relationship between dimension tolerance and shape and position tolerance which is difficultly understood while designing,especially the compensation of both sides,the writer does the further re.

结合机械零件设计时较难理解的形位公差与尺寸公差的关系,特别是相互之间的补偿问题进行了较为全面、深入的研究,可以为工程设计人员和教学人员提供正确的使用和阅读参考。

Choice and inspection of geometrical tolerances of centrifuge;

离心机主轴形位公差选择标注及检测

The paper analyzes the control feature of run-out tolerance and the relationship between run-out tolerance and the other geometrical tolerance , and discusses the proper use of run-out tolerance .

分析了跳动公差的控制特点以及与其它形位公差的关系 ,并对正确合理使用跳动公差进行了讨

An ideal boundary, which stands for the limit condition of real feature under meeting design demands, can be formed by suitable dimensional and geometrical tolerances.

理想边界是由尺寸公差和形位公差综合形成的 ,它代表实际要素在满足设计要求条件下的极限状态 。

Parameterized programming for form and position tolerances automatically;

AutoCAD环境下形位公差的参数化自动标注程序设计

A graphic method for determining form and position tolerance is presented based on the tolerance principle and deviation and tolerance theory.

根据公差原则并应用偏差和公差理论 ,提出一种基于公差原则的确定形位公差的图解法。

Mathematical basis is provided to measure form and position tolerance of roller rim using coordinate value electrometry and microcomputer data processing.

探讨一种在统计意义下控制功能等效的变换算法，将生产图样中标注的尺寸公差变换成以参数方程形式描述的形位公差。

Analysis of the shape and location tolerance loop in dimensional chain;

尺寸链中形位公差环的分析

Therefore,this paper,theoretically, presents to reader the calculation method to decide the dimension tolerance & tolerance of form and position,followed by application to this method in one example.

因此,本文主要从理论的角度,采用计算方法来确定尺寸公差及形位公差并举实例说明此方法的应用。

A Brief Analysis of Compensation on Dimension Tolerance and Shape and Position Tolerance in Tolerance Principle;

公差原则中形位公差与尺寸公差的补偿简析

A Graphing Method to Solve the Compensating Relation of Geometric Tolerance and Dimensional Tolerance

作图法求解形位公差和尺寸公差相互补偿关系

Dimension Interactively form and Position Tolerance by Quoting shape Definition and Graph Control Menu

引用形定义与图像控件菜单交互标注形位公差

Study on Computer Aided Tolerancing for Composite Dimensional and Geometric Tolerances;

尺寸公差与形位公差的计算机辅助混合设计研究

Study on the Technology of Computer-Aided Geometric Tolerance Types Generation;

计算机辅助形位公差类型生成技术的研究

A brief discussion about the choice of tolerance of form and position in the design of machine element;

浅谈机械零件设计中形位公差项目的选用

The Main Geometric Tolerance in the Nipper Plate Mechanisms Dynamics Analysis

计入主要形位公差的钳板机构动力学分析

Development of a geometric tolerance code tagging system based on the AutoCAD

基于AutoCAD的形位公差代号标注系统的开发

Draft allowances can be incorporated into dimensional tolerances or geometric tolerances only upon consultation with the foundry.

拔模斜度余量只有经与铸造厂商定后才能合并到尺寸公差或形位公差中。

Study on Theories and Methods of Geometric Tolerance Design Based on Variational Geometric Constraints Network

基于变动几何约束网络的形位公差设计理论与方法的研究

Research on Recognition of Dash-dotted Line, Roughness Degree Symbols and Tolerance Symbols in Shape and Relative Position in Engineering Drawings;

机械工程图中点划线、粗糙度和形位公差符号的识别技术研究

Research on Key Techniques for Concurrent Design of Product Conceptual Structure and Geometric Tolerance;

产品概念结构与形位公差并行设计关键技术研究

Geometrical tolerance-Positional tolerancing

GB/T13319-1991形状和位置公差位置度公差

Geometrical tolerancing--Geometrical tolerance for features without inpidual tolerance indications

GB/T1184-1996形状和位置公差未注公差值

position of related features

位置公差，关连形体间的位置

Rules for inspection of form and position tolerances

GB/T1958-1980形状和位置公差检测规定

Geometrical tolerancing indication of non-rigid parts

GB/T16892-1997形状和位置公差非刚性零件注法

The politician has a very bad image among people.

那位政治家在人民中的形象很差。