基本释义:

研磨机扑

网络释义

1)grinding robot,研磨机扑

2)abrasive lapping machine,磨料研磨机

3)abrasive,磨料，研磨机

4)lapping machine development,研磨机研制

5)grinding mechanism,研磨机理

6)mechanical lapping,机械研磨

用法和例句

The development outline of the disc mill and grinding mechanism for different type of roller mill were introduced.

介绍了磨粉机的发展概况及不同类型磨粉机的研磨机理。

Vibration of lapping machine is an important influencing factor on the lapping quality of diamond cutting tools in mechanical lapping, especially in the precision lapping process.

研磨机床的振动是影响金刚石刀具机械研磨质量的重要因素,尤其在精密研磨工序。

The critical condition for plastic deformation of lapped surface layer in mechanical lapping single crystal diamond is analyzed in theory firstly.

为研究单晶金刚石晶体机械研磨过程中表层材料的去除机理,首先从理论上分析了单晶金刚石晶体在机械研磨过程中表层材料发生塑性变形的临界条件,并利用原子力显微镜对研磨后的(110)晶面和(100)晶面进行观测,发现两个晶面沿易磨方向<100>和难磨方向<110>研磨时的研磨表面都存在塑性变形后的纳米沟槽,表明表层材料实现了塑性方式去除。

In the paper, mechanical lapping was used for lapping thick CVD diamond and the lapping rate was 6.

本文采用了机械研磨法来研磨CVD金刚石厚膜,研磨速率达6。

Effect of magnetic fluid grinding parameters on grinding efficiency and grinding mechanism of steel balls

磁流研磨参数对钢球研磨效率及研磨机理的影响

The Study of Lapping Mechanism and Surface Quality on Lapping of Solid Abrasive;

固着磨料高速研磨机理及工件表面质量的研究

This paper explains lapping principle and the small tendency mechanism of ball roundness error.

本文论述了研磨原理及球体圆度误差趋小化研磨机理;

Study on Grinding Mechanism of Disperse Milling Medium Dynamical for Vibration Mill

振动磨机离散磨介动力学碎磨机理研究

Laboratory Experimental Studies of the Wear Mechanism of Wet-grinding Mill Liner;

湿式磨机衬板磨损机理的实验室研究

Study on the Removal Mechanism and Grinding Technique of the PCD Cutting Tools;

PCD刀具磨削机理及刃磨工艺研究

Study on Principle of Magnetic Abrasive Polishing for the Roller Gear Cam and Its Finishing Machine

弧面凸轮磁性磨削机理及研磨机床的研究

Research of the Grinding Aid Mechanism of Multi?Amidocyanogen Sodium Phosphate for Ceramics Materials

多胺基磷酸钠陶瓷助磨剂的助磨机理研究

Research on Sand Slurry Abrasion Mechanisms of Dredging Conditions and New Wear-Resistant Materials;

疏浚工况泥沙磨损机理及其耐磨新材料研究

Research on Grinding Mechanism and Grinding Wheels for PCD Cutting Tools;

聚晶金刚石刀具刃磨机理及其刃磨工艺研究

Study of Wear-resistant and Abrasion Mechanism of Co-Cr-W Hardfacing Alloys;

Co-Cr-W堆焊合金耐磨性及耐磨机理的研究

Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;

旋转磨料射流喷嘴磨损机理与钻孔试验研究

Research and Application on Wear Resistance and Life Extensional Mechanism of Lubricant and Anti-wear Agent;

润滑抗磨剂的耐磨延寿机理及其工程应用研究

Research on the Frictional and Wear Mechanism of the Spindle with Plasma Sprayed Ceramic Coating;

磨床主轴颈陶瓷涂层摩擦磨损机理研究

Developing ballmill wear-resisting liner with (the method of)TQC;

用全面质量管理(TQC)的方法研制球磨机耐磨衬板

Research on the Material Removal Mechanism of Semi-Fixed Abrasive Tool

基于半固着磨粒磨具加工的材料去除机理研究

Research on Accelerated Wear Mechanism for 3Cr13 Sprayed Coating Under Abrasive Particles Lubrication

含磨粒润滑条件下3Cr13涂层加速磨损机理研究

Simulation Study of Glass Grinding Mechanism based on Single Diamond Grit

基于单颗磨粒玻璃磨削机理的仿真研究