基本释义:

压缩机轮挡圈螺母扭矩

网络释义

1)compressor wheel retainer nut torque,压缩机轮挡圈螺母扭矩

2)compressor wheel retainer nut,压缩机轮挡圈[定位器]螺母

3)compressor wheel nut,压缩机轮螺母

4)turbo compressor nut,涡轮压缩机螺母

5)Torque Nut,扭矩螺母

6)wheel nut torque,车轮螺母拧紧扭矩

用法和例句

Popularization and Application of Thickening Torque Nut in the Coal Road Full Bolding

加厚型扭矩螺母在煤巷全锚杆巷道的推广使用

all-metal prevailing torque type nuts

金属预置扭矩式螺帽

a hand tool that is used to hold or twist a nut or bolt.

用来上紧或扭螺母或螺栓的手工具。

Torque Test of Thread Fastener for Automotive Braking Pipe Line

汽车制动管路螺纹紧固件的扭矩试验

NC machining nut with large lead and 3-start rectangular thread

大导程三头矩形螺纹螺母的数控加工

1~10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm

GB/T3098.13-1996紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径

Comparison Between Torque Method and Angle Method in Bolt Assembly Technology

螺栓装配技术中扭矩法与转角法比较研究

Study on factors to influence torque strength of anaerobic thread-locking adhesives for automobiles

汽车用厌氧螺纹锁固胶扭矩的影响因素研究

static torque calibuation stand

转矩[扭矩] 静校台

Measurement and Study on Screw Torque and Axial Thrust of Twin Screw Pulping Extruder

双螺杆磨浆机螺杆扭矩和轴向推力的测量与研究

Replace body bolts and torque evenly to70 ft./ lbs.

重新放置阀体螺栓，并且用70英尺/的扭矩均匀的旋紧。

Replace body bolts and torque evenly to 70 ft./lbs.

重新放置阀体螺栓，并且用70英尺/磅的扭矩均匀的旋紧。

Torque-Add-Angle Control Approach Study for Bolt-Joints of Automotive Key Components;

汽车关键零部件螺纹联接的扭矩加转角控制方法研究

Analysis and Research on Fixed Torque Bolt Joint Function Based on RE;

基于反求工程的定扭矩螺栓联接功能分析与研究

Regression Analysis of Relationship Between Axial Force and Torque of High-strength Bolt Connecting Steel Structure for Boiler Based on Experiment Data

基于试验数据的锅炉钢结构高强度螺栓轴力与扭矩关系回归分析

Impact Analysis of Make-up Torque of Drill Connecting Thread Based on 3-D Finite Element Model

基于三维有限元模型的钻具连接螺纹上扣扭矩影响分析

The state of being twisted into a spiral;torsional stress or strain.

螺旋状，扭力扭成螺旋状；扭转的压力或张力

After proper operation has been verified, tighten all bolts using the crossover method. Recommended tightening torques pattern is listed below.

在检验操作能够正常进行后，在采用交叉法紧固所有螺栓。推荐的紧固扭矩模式如下所示。