基本释义:

一般剃齿

网络释义

1)crown shaving,一般剃齿

2)gear shaving,剃齿

3)shave,剃齿

4)gear-shaving,剃齿

5)shaving,剃齿

6)Shaving Concave,剃齿中凹

用法和例句

Research on the tooth profile error of gear shaving;

剃齿加工齿形误差的研究

Investigation of out-of-bound-meshing of gear shaving;

剃齿过程中线外啮合现象的研究

The influencing factors for the accuracy and surface quality, service life of the gear shaver, and shaving efficiency in shaving process are analyzed, and the solution methods are presented, and the application examples are also given.

对影响剃齿精度、剃齿表面质量、剃齿刀耐用度、剃齿效率的原因进行了分析,提出了解决问题的方法和措施,并给出应用实例。

The shaved surfaces of the gear and the shapes of the shavings are observed by microscope in this paper.

用显微镜观察被剃齿轮已加工表面形貌和剃屑形状，对剃削过程进行分析可知，剃削过程是剃齿刀齿面和齿轮待加工表面在空间干涉。

A research on the gear-shaving-nitriding process technology for manufacturing timing gear in diesel engine;

柴油发动机正时齿轮剃齿氮化加工工艺研究

The cutting depth during shaving process is analyzed and calculated by applying the basic theories of gear engaging principle, differential geometry and elastic mechanics.

运用啮合原理、微分几何和弹性力学等基础理论，对剃齿过程中的切削深度进行分析计算、定量解释并验证了被剃齿面产生的齿形中凹误差，对提高剃齿精度、降低齿轮传动噪音有着重要意义。

right-angle traverse shaving

切线方向进刀剃齿法

Feature-Based Shaving Cutter Modeling and Deformation Analysis;

剃齿刀特征建模及剃齿过程的变形分析

Study on Profiling Plunge Shaving-Cutter on Plunge Shaving-Machine and Plunge Shaving with Profiled Cutter;

径向剃齿刀在机修形及径向剃齿的机理研究

The Technology of the Radial Gear Shaving and the Research of the Cutting Tool Application;

齿轮径向剃齿工艺及刀具的应用研究

The Profile Modification Technique of Shaving Cutter and the Study of CAD System

剃齿刀修形技术及其CAD系统的研究

Optimization of Designing Parameters of Shaving Cutter

基于MATLAB的剃齿刀设计参数的优化

The Vibration Analysis and Computer Simulation for Hobbing and Shaving of Harden Gear;

硬齿面滚剃齿加工振动分析及计算机仿真

A research on the gear-shaving-nitriding process technology for manufacturing timing gear in diesel engine;

柴油发动机正时齿轮剃齿氮化加工工艺研究

Research on the Profile Relief of Gear Based on Dynamics Characteristics about Gear Transmission

基于齿轮传动系统动态特性的剃齿修形研究

At the same time, an example for the manufacture of an internal gear shaver is presented through the modification of the longitudinal tooth shape of an external gear shaver.

同时，还列举了用标准的外剃齿刀经过齿向修形来制造内剃齿刀的例子。

By means of chemical composition analysis, hardness testing, non-metallic inclusion examination, metallographic examination, macro and micro-fractography fracture analysis were conducted.

对剃齿刀断口进行了宏、微观检验、化学成分分析、硬度测试和非金属夹杂物及显微组织检验。

The CAD System's Study and Development of a Preshaving Pinion-shaped Cutter;

剃前插齿刀CAD系统的研究与开发

CAD of the preshaving gear-hob based on object ARX;

基于Object ARX的剃前齿轮滚刀CAD系统二次开发

His curling shaven lips laughed and the edges of his white glittering teeth.

他撇着剃得干干净净的嘴唇笑了，露出发着白光的齿尖。

A sharp razor gives a good shave.

锋利的剃须刀好剃须。

cut-throat razor

ph.1. 直柄剃刀,开式剃刀

the face, using a razor

剃（须，发），刮脸

You have seen him at work?'

你见过他剃头么？”