基本释义:

有效圆周力

网络释义

1)effective circle force,有效圆周力

2)effective circumference,有效圆周长

3)effective stress circle theory,有效应力圆理论

4)peripheral force,圆周力

5)circumferential stress,圆周应力

6)circumferential pressure,圆周压力

用法和例句

Based on the Hertz contact theory and curve beam theory,an analysis is made of the influence of the circumferential stress of the turntable support hollow wheels on the von Mises stress peak value and location of the wheel-rail contact.

以Hertz弹性接触理论和曲梁理论为基础,分析了回转支承空心钢轮的圆周应力对轮轨接触von Mises应力峰值及其位置的影响,通过采用平面应变有限元的进一步分析表明,降低钢轮截面梁高可以提高钢轮的径向柔度,同时圆周应力可以有效地抑制接触正应力,提高钢轮接触强度,但可能使钢轮接触区内von Mises应力峰值点从中间向两侧分离,导致应力循环次数翻倍,影响疲劳强度。

The radial displacement must be accompanied by a circumferential force.

径向位移必须伴有圆周力。

He force keeps the body moving in a circle.

力使物体做圆周运动。

circumferential force

切线力, (沿着圆周作用的)切向力

The circle indicates the squeezing of its robotic grip; as the force of the grip increases, the circle widens.

圆周表示机器人的手钳夹紧；夹力增加，圆圈扩大。

This force keeping the stone moving in a circle,

这个让石块做圆周运动的力，

The compressor-outlet pressure is nearly constant around the circumference.

压气机出口压力沿圆周方向接近于常数。

Receiving strength Analyses of the Particle at the Highest Point in the cicrular motion;

质点作圆周运动时在最高点的受力分析

Cutting Force of Single Circumference Edge for Micro Orthogonal Turn-Milling

微小型正交车铣单齿圆周刃理论切削力研究

The boundary line of a circle.

圆周一个圆的边界线

Circumference:The boundary line of a circle.

圆周:一个圆的边界线.

Seating forces are generated by the torque during closing uniformly around the entire circumference.

关闭期间的扭矩产生阀座力，并均匀一致的作用在整个圆周周围。

Power take-off pulley for agricultural tractors--Peripheral speed and width

GB/T2778-1992农业拖拉机动力输出皮带轮圆周速度和宽度

Cut-off: The maximum length of sheet that can be printed on a web press and equivalent dto the cirvumference of its impression cylinder.

截度:卷筒纸印刷机所印最长纸度，亦步亦趋是压力圆筒的周长。

Analysis of a 4 Superharmonic Resonances of Edge-clamped Circular Plate Subjected to Transverse Excitation Load

周边夹紧圆板在横向激振力作用下的4倍超谐波共振分析

of or relating to an epicycle.

属于或关于周转圆的。

allowable offset in circumferential joints

圆周焊缝的允许偏移

circular-focused dynode system

圆周聚焦式倍增系统

arm circumference tape

测量胳臂圆周的卷尺